Journal of Mechanical Engineering >
Dimensional Synthesis of a 2-UPR-SPR Parallel Manipulator
Received date: 2014-11-11
Revised date: 2015-09-04
Online published: 2015-11-05
The Exechon manipulator consists of a 2-UPR-SPR PM (parallel manipulator) which can perform two coupled rotational DOFs and one translational DOF and a RR serial manipulator (where U is a universal pair, P is a prismatic pair, R is a revolute pair, and S is a spherical pair). It has been extensively applied to advanced manufacturing industry. Few literatures focus on the dimensional synthesis of the 2-UPR-SPR PM until now. Based on the concept of screw theory, the dimensional synthesis of the 2-UPR-SPR PM is addressed by taking motion/force transmission into account. The inverse kinematics module and screws of the manipulator are analyzed. The local transmission index and global transmission index are defined as the performance evaluation criterion of the manipulator. With the approach of optimal design space, the atlases of performance indices are presented. The optimum region is obtained according to the demands of practical application requirements, where all the possibilities of the dimensionless parameter of the manipulator are included, and a set of numerical resultants are randomly chosen from the optimum region in order to determine the best parameters that satisfy practical requirements.
WANG Feibo1, CHEN Qiaohong2, WU Chuanyu1, LI Qinchuan1
[1] WAHL J. Articulated tool head：Germany，WO
[2] CARRETERO J A，NAHON M，GOSSELIN C M，et al. Kinematic analysis of a three-DOF parallel mechanism for telescope applications[C]// ASME Design Automation Conferences，September 15-20，1997，Sacramento，CA，California. ASME，1997：1-8.
[3] POULIOT N A，GOSSELIN C M，NAHON M A. Motion simulation capabilities of three-degrees-of-freedom flight simulators[J]. Journal of Aircraft，1998，35(1)：9-17.
[4] LIU D J，CHEN R S，LI Z F，et al. Research on the theory and the virtual prototype of 3-DOF parallel-link coordinating-measuring machine[J]. IEEE Transactions on Instrumentation and Measurement，2003，52(1)：119-125.
[5] BI Z M，JIN Y. Kinematic modeling of Exechon parallel kinematic machine[J]. Robotics and Computer-Integrated Manufacturing，2011，27(1)：186-193.
[6] GOSSELIN C，ANGELES J. The optimum kinematic design of a spherical three-degree-of freedom parallel manipulator[J]. Journal of Mechanisms Design，1989，111(2)：202-207.
[7] GOSSELIN C，ANGELES J. A global performance index for the kinematic optimization of robotic manipulators[J]. Journal of Mechanical Design，1991，113(3)：220-226.
[8] MERLET J P. Jacobian，manipulability，condition number，and accuracy of parallel robots[J]. Journal of Mechanical Design，2006，128(1)：199-206.
[9] WANG J S，LIU X J，WU C. Optimal design of a new spatial 3-DOF parallel robot with respect to a frame-free index[J]. Science in China Series E：Technological Sciences，2009，52(4)：986-999.
[10] BALL R S. A treatise on the theory of screws[M]. Cambridge：Cambridge University Press，1998.
[11] YUAN M S C，FREUDENSTEIN F，WOO L S. Kinematics analysis of spatial mechanism by means of screw coordinates. Part 2—analysis of spatial mechanisms[J]. Journal of Engineering for Industry，1971，93(1)：67-73.
[12] SUTHERLAND G，ROTH B. A transmission index for spatial mechanisms[J]. Journal of Manufacturing Science and Engineering，1973，95(2)：589-597.
[13] TSAI M J，LEE H W. The transmissivity and manipulability of spatial mechanisms[J]. Journal of Mechanical Design，1994，116(1)：137-143.
[14] TSAI M J，LEE H W. Generalized evaluation for the transmission performance of mechanisms[J]. Mechanism and Machine Theory，1994，29(4)：607-618.
[15] CHEN C，ANGELES J. Generalized transmission index and transmission quality for spatial linkages[J]. Mechanism and Machine Theory，2007，42(9)：1225-1237.
[16] WANG J，WU C，LIU X J. Performance evaluation of parallel manipulators：Motion/force transmissibility and its index[J]. Mechanism and Machine Theory，2010，45(10)：1462-1476.
[17] GALLARDO J，RICO J M，FRISOLI A，et al. Dynamics of parallel manipulators by means of screw theory[J]. Mechanism and Machine Theory，2003，38(11)：1113-1131.
[18] YANG J，CHEN X，LIU X J. Motion and force transmissibility of a planar 3-DOF parallel manipulator[C]// Mechatronics and Automation (ICMA)，August 5-8，2012，Chengdu，Sichuan，China. 2012：761-765.
[19] TAO D C. Applied linkage synthesis[M]. Reading：Addison-Wesley，1964.
[20] WU C，LIU X J，WANG L，et al. Optimal design of spherical 5R parallel manipulators considering the motion/force transmissibility[J]. Journal of Mechanical Design，2010，132(3)：031002.
[21] LIU X J，WANG J. A new methodology for optimal kinematic design of parallel mechanisms[J]. Mechanism and Machine Theory，2007，42(9)：1210-1224.
[22] XIE F，LIU X J，WANG J. A 3-DOF parallel manufacturing module and its kinematic optimization[J]. Robotics and Computer-Integrated Manufacturing，2012，28(3)：334-343.
/
| 〈 |
|
〉 |