研究了复合添加Ga/Nd元素的超低银Sn-0.3Ag-0.7Cu钎料在长期时效过程中的微焊点界面组织演化情况. 结果表明，复合添加适量Ga/Nd元素可以显著改善时效后微焊点界面组织，抑制微焊点界面附近大块状金属间化合物以及稀土相的生成. 经720 h时效后，即使在含有过量Nd元素的微焊点界面仍没有发现明显的Ag3Sn相和稀土相，取而代之的是小块状的新相，结合EDS和XRD分析结果推测该相含有Ga2Nd与Cu6Sn5. 经过长期时效处理后，微焊点抗剪力接近Sn-3.8Ag-0.7Cu焊点抗剪力的90%，具有较好的力学性能.
The effect of Ga/Nd multi-addition on microstructure of Sn-0.3Ag-0.7Cu solder in the course of aging treatment was investigated. The results indicated that the multi-addition of Ga/Nd could significantly refine the interfacial microstructure of solder joint and inhibit the formation of intermetallic compounds after aging treatment. After aging treatment over 720 h, no evident rare earth phase Ag3Sn was found in Sn-0.3Ag-0.7Cu-0.5Ga-1Nd solder joints, instead, new phase was formed near the interface of solder joint And the results of EDS and XRD indicated that the new phase should contain Ga2Nd and Cu6Sn5. The shear force of Sn-0.3Ag-0.7Cu solder joint after aging treatment reached 90% of Sn-3.8Ag-0.7Cu solder joint.
[1] Xu S, Habib A H, Pickel A D, et al. Magnetic nanoparticle-based solder composites for electronic packaging applications[J]. Progress in Materials Science, 2015, 67:95-160.
[2] 刘平, 顾小龙, 赵新兵, 等. 不同Ag元素含量Sn-Ag-Cu无铅钎料性能分析[J]. 焊接学报, 2012, 33(6):55-58 Liu Ping, Gu Xiaolong, Zhao Xinbing, et al. Properties of Sn-Ag-Cu lead free solders with different silver content[J]. Transactions of the China Welding Institution, 2012, 33(6):55-58
[3] Tang Y, Luo S M, Li G Y, et al. Effect of Mn nanoparticles on interfacial intermetallic compound growth in low-Ag Sn-0.3Ag-0.7Cu-x Mn solder joints[J]. Journal of Electronic Materials, 2017, 47(2):1673-1685.
[4] Wu J, Xue S, Wang J, et al. Effect of Pr addition on properties and Sn whisker growth of Sn-0.3Ag-0.7Cu low-Ag solder for electronic packaging[J]. Journal of Materials Science Materials in Electronics,, 2017, 28(14):10230-10244.
[5] Šimeková Beáta, Erika H, Ingrid K. Development of SnAgCu solders with Bi and In additions and microstructural characterization of joint interface[J]. Welding in the World, 2017, 61(3):1-9.
[6] Association Connecting Electronics Industries. Guidelines for accelerated reliability testing of surface mount solder attachments:IPC-SM-785[S]. Illinois, 1992.
[7] Department of Defense of the USA. Test method military standard for microelectronics:MIL-STD-883[S]. Columbus:AMSC N/A, 1990.
[8] Council of Japan Industry Standard. Test methods for lead-free solders-Part7:methods for shear strength of solder joints on chip components:JIS Z 3198-2[S]. Japan, 2003.
[9] 皋利利, 薛松柏, 许辉. SnAgCu-xPr钎料组织及性能[J]. 焊接学报, 2012, 33(1):69-72 Gao Lili, Xue Songbai, Xu Hui. Microstructure and properties of SnAgCu-xPr solder[J]. Transactions of the China Welding Institution, 2012, 33(1):69-72
[10] El-Daly A A, El-Taher A M, Gouda S. Development of new multicomponent Sn-Ag-Cu-Bi lead-free solders for low-cost commercial electronic assembly[J]. Journal of Alloys & Compounds, 2015, 627:268-275.
[11] Zhang Q Y, Liu S Q, Liu D Q, et al. Effect of trace additives on anti-oxidation of molten Sn-Pb eutectics[J]. Acta Metallurgica Sinica, 1984, 20(4):A296-A302.
[12] Xue P, Xue S B, Shen Y F, et al. Inhibiting the growth of Sn whisker in Sn-9Zn lead-free solder by Nd and Ga[J]. Journal of Materials Science Materials in Electronics, 2014, 25(6):2671-2675.
