The flexible planetary ring gear is taken as the research object. In order to formulate a more accurate mathematical model in compliance with common engineering practices, the tension, transverse shear, and bending deformation, of the ring gear are considered. According to the structure and boundary, vibration analysis model for flexible spur ring gear with elastic foundation is established by using the plane beam element, and the inherent characteristics are investigated. Based on the superposition principle and force to a point translation theorem, the combined excitation apporach is appled to simulate the meshing excitation acting along the line of action. Effects of meshing excitation on the vibration response of flexible ring gear is revealed from the frequency domain. The results indicate that, the vibration type of flexible ring gear with elastic foundation can be divided into three categories:Translational vibration mode (each point of the ring gear has the same motion), flexural vibration mode (the ring gear occurs vibration of bending deformation), and extensible vibration mode (each point of the ring gear has only radial vibration). The meshing excitation has a slight impact on extensible vibration mode, while it influences the flexural vibration mode apparently. For the spur ring gear, flexural vibration mode is the main cause of vibration and noise. When extensible vibration mode (wave number m=0) occurs resonance, each point of the ring gear has equal vibration amplitude. When the ring gear occurs resonance and the wave number m is not zero, the ring gear has m waveform.
XU Huachao
,
QIN Datong
. Vibration Response of Flexible Spur Ring Gear with Elastic Foundation under Internal Excitation[J]. Journal of Mechanical Engineering, 2018
, 54(9)
: 161
-167
.
DOI: 10.3901/JME.2018.09.161
[1] KAHRAMAN A, VIJAYAKAR S. Effect of internal gear flexibility on the quasi-static behavior of a planetary gear set[J]. Journal of Mechanical Design, 2001, 123(3):408-415.
[2] KAHRAMAN A, KHARAZI A A, UMRANI M. A deformable body dynamic analysis of planetary gears with thin rims[J]. Journal of Sound and Vibration, 2003, 262(3):752-768.
[3] WU X, PARKER R G. Vibration of rings on a general elastic foundation[J]. Journal of Sound and Vibration, 2006, 295(1-2):194-213.
[4] GEVARTER W B. NASA technical memorandum[M]. Ohio:Lewis Research Center, 1998.
[5] 梁雁昆,刘世军,李志胜,等. 行星齿轮增速器高速内齿圈模态分析[J]. 机械传动, 2015, 39(7):158-160. LIANG Yankun, LIU Shijun, LI Zhisheng, et al. Modal analysis of the high speed inner gear ring in planetary gear speeder[J]. Journal of Mechanical Transmission, 2015, 39(7):158-160.
[6] WU X, PARKER R G. Modal properties of planetary gears with an elastic continuum ring gear[J]. Journal of Applied Mechanics, 2008, 75(3):031014.
[7] PARKER R G, WU X. Vibration modes of planetary gears with unequally spaced planets and an elastic ring gear[J]. Journal of Sound and Vibration, 2010, 329(11):2265-2275.
[8] PARKER R G, WU X. Parametric instability of planetary gears having elastic continuum ring gears[J]. Journal of Vibration and Acoustics, 2012, 134(4):041011.
[9] WU X. Vibration of planetary gears having an elastic continuum ring gear dissertation[D]. Columbus:Ohio State University, 2010.
[10] 张俊,宋轶民,王建军. 计入齿圈柔性的直齿行星传动动力学建模[J]. 机械工程学报, 2009, 45(12):29-36. ZHANG Jun, SONG Yimin, WANG Jianjun. Dynamic modeling for spur planetary gear transmission with flexible ring gear[J]. Journal of Mechanical Engineering, 2009, 45(12):29-36.
[11] 张俊,刘先增,焦阳,等. 基于刚柔耦合模型的行星传动固有特性分析[J]. 机械工程学报, 2014, 50(15):104-112. ZHANG Jun, LIU Xianzeng, JIAO Yang, et al. Vibration analysis of planetary gear trains based on a discrete continuum dynamic model[J]. Journal of Mechanical Engineering, 2014, 50(15):104-112.
[12] TANNA R P, LIM T C. Modal frequency deviations in estimating ring gear modes using smooth ring solutions[J]. Journal of Sound and Vibration, 2004, 269(3):1099-1110.
[13] WANG S, HUO M, ZHANG C, et al. Effect of mesh phase on wave vibration of spur planetary ring gear[J]. European Journal of Mechanics-A/Solids, 2011, 30(6):820-827.
[14] ABOUSLEIMAN V, VELEX P. A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analyses of planetary/epicyclic gear sets[J]. Mechanism and Machine Theory, 2006, 41(6):725-748.
[15] ABOUSLEIMAN V, VELEX P, BECQUERELLE S. Modeling of spur and helical gear planetary drives with flexible ring gears and planet carriers[J]. Drive System Technique, 2007, 129(1):711-722.
[16] 魏静,张爱强,秦大同,等. 考虑结构柔性的行星轮系耦合振动特性研究[J]. 机械工程学报, 2017, 53(1):1-12. WEI Jing, ZHANG Aiqiang, QIN Datong, et al. Coupling vibration analysis for planetary gear system considering flexible structure[J]. Journal of Mechanical Engineering, 2017, 53(1):1-12.
[17] ZHANG Jun, GUO Fan. Statistical modification analysis of helical planetary gears based on response surface method and monte carlo simulation[J]. Chinese Journal of Mechanical Engineering, 2015, 28(6):1194-1203.
[18] ZHOU Shihua, SONG Guiqiu, REN Zhaohui, et al.. Nonlinear dynamic analysis of coupled gear rotor bearing system with the effect of internal and external excitations[J]. Chinese Journal of Mechanical Engineering, 2016, 29(2):281-292.
