The active steering control can effectively improve the steering ability of independent wheels. Based on the research of torque ripple of the permanent magnet synchronous motor(PMSM), the source of torque ripple of PMSM is analyzed, and the torque ripple error of hub motor is calculated. The simulation model for active steering control of independently rotating wheel in in-wheel motor is established. The effect of torque ripple on active steering control of independently rotating wheel in in-wheel motor is investigated. Through theoretical derivation and model simulation, when the vehicle runs at a constant speed in a straight line, there is a functional relationship between the control accuracy of the hub motor system and the maximum lateral displacement of the wheelset. When the control accuracy of the hub motor becomes worse, the fluctuation amount of the lateral displacement of the wheel pair also becomes larger. Among them, the equivalent conicity of the wheel tread and the wheel's nominal rolling radius are important influencing factors. The relations between the accuracy of active steering control of independently rotating wheel in in-wheel motor and wheel/rail profile are derived. The method which used to improve the active steering control of independently rotating wheel by optimizing the tread is proposed.
JI Yuanjin
,
LI Rui
,
REN Lihui
. Influence Factors of Active Steering Control of Independent Wheel Set Based on Hub Motor and Speed Difference Feedback[J]. Journal of Mechanical Engineering, 2018
, 54(8)
: 48
-56
.
DOI: 10.3901/JME.2018.08.048
[1] SATOU E, MIYAMOTO M. Dynamics of a bogie with independently rotating wheels[J]. Vehicle System Dynamics, 1992, 20(Suppl):519-534.
[2] SHEN G, AVASSE J B, CHOLLET H, et al. A unique design method for wheel profiles by considering the contact angle function[J]. Proceedings of the Institution of Mechanical Engineers, Part F:Journal of Rail and Rapid Transit, 2003, 217(1):25-30.
[3] FREDERICH F. A bogie concept for the 1990s[J]. Railway Gazette International, 1988(9):583-585.
[4] SUDA Y. Self-steering ability of the proposed new concept of independently rotating wheelset using inverse tread conicity[C/CD]//22nd IAVSD Symposium Manchester, UK, 2011.
[5] WICKENS A H. Dynamics Stability of articulated and steered railway vehicles guided by lateral displacement feedback[C]//13th IAVSD Symposium, Chengdu, China, 1993:257-259.
[6] MEI T X, GOODALL R M. Robust control for independently rotating wheelsets on a railway vehicle using practical sensors[J]. Control Systems Technology, IEEE Transactions, 2001, 9(4):599-607.
[7] MEI T X, GOODALL R M. Practical strategies for controlling railway wheelsets independently rotating wheels[J]. Dynamic Systems, Measurement, And Control, 2003, 39(9):354-360.
[8] MEI T X, LI H, GOODALL R M, et al. Dynamics and control assessment of rail vehicles using permanent magnet wheel motors[J]. Vehicle System Dynamics, 2002, 37(Suppl.):326-337.
[9] LI J, GOODALL R M, MEI T X, et al. Steering controllers for rail vehicles with independently driven wheel motors[J]. Electronic System and Control Division Research, 2003:4-6.
[10] PEREZ J, BUSTURIA J M, MEI T X, et al. Combined active steering and traction for mechatronic bogie vehicles with independently rotating wheels[J]. Annual Reviews in Control, 2004, 28(2):207-217.
[11] 任利惠, 周劲松, 沈钢. 采用轮毂电机的独立车轮轮对的主动导向控制[J]. 中国铁道科学, 2010, 31(5):77-83. REN Lihui, ZHOU Jinsong, SHEN Gang. The active steering control of the independent wheelset with the hub motors[J]. China Railway Science, 2010, 31(5):77-83.
[12] PARTHASARATHY S, THENMOZHI R, RAJASEK ARAN V. Current harmonic reduction using current injection technique in a converter system[C]//International Conference on Computing, Electronics and Electrical Technologies, 2012:23-29.
[13] JUN-KOO K, SEUNG-KI S. New direct torque control of induction motor for minimum torque ripple and constant switching frequency[J]. IEEE Transactions on Industrial Electronics, 1999, 35(5):1076-1082.
[14] 刘艳. 多电机同步控制系统控制策略研究[D]. 沈阳:沈阳工业大学, 2013. LIU Yan. Research on control strategy of multi-motor synchronous control system[D]. Shenyang:Shenyang University of Technology, 2013.
[15] PEREZ-PINAL F J, CALDERON G, ARAUJO-VARGAS I. Relative coupling strategy[C]//Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International. IEEE, 2003:1162-1166.
[16] SIMANEK J, NOVAK J, CERNY O, et al. FOC and flux weakening for traction drive with permanent magnet synchronous motor[C]//2008 IEEE International Symposium on Industrial Electronics. IEEE, 2008:753-758.
[17] CHUNG D W, SUL S K. Analysis and compensation of current measurement error in vector-controlled AC motor drives[J]. IEEE Transactions on Industry Applications, 1998, 34(2):340-345.
[18] 杨晓红. 100%低地板车牵引/导向控制技术研究[D]. 西南交通大学, 2013. YANG Xiaohong. Research on control technology of 100% low floor vehicle traction and steering[D]. Chengdu:Southwest Jiaotong University, 2013.
[19] SHEN G, ZHONG X. A design method for wheel profiles according to the rolling radius difference function[J]. Proceedings of the Institution of Mechanical Engineers, Part F:Journal of Rail and Rapid Transit, 2011, 225(5):457-462.
