Journal of Mechanical Engineering >

2018 , Vol. 54 >Issue 15: 132 - 140

DOI: https://doi.org/10.3901/JME.2018.15.132

Unstructured T-spline-based Isogeometric Analysis for Thin Shells

  • YUAN Pei ,
  • LIU Zhenyu ,
  • QIU Chan ,
  • TAN Jianrong
Expand
  • State Key Lab of CAD & CG, Zhejiang University, Hangzhou 310027

Received date: 2017-08-13

  Revised date: 2018-01-23

  Online published: 2018-08-05

Fold

Abstract

Isogeometric analysis(IGA) is a method aimed at avoiding meshing procedure of the traditional finite element analysis by using the same basis for analysis as is used to describe the geometry, thus integrating CAE into a general CAD modeling system. The unstructured T-splines are adopted to construct complex geometric models. By integrating the Kirchhoff-Love theory, an IGA thin-shell element is established for the modal analysis and elastic analysis. Due to the non-interpolatory nature of the geometric basis functions, the loads of IGA elements cannot be evenly distributed to the control points as with the traditional finite element. The loading areas are then classified to two basic types and an integration mapping method is proposed to map the Gauss quadrature points of the regular domain to the basic types. Numerical examples illustrated that the unstructured T-splines-based thin-shell element could achieve the convergence with much less degrees of freedom than the traditional finite element method and the integration mapping method solves the imposition problem of external loading effectively.

Key words： isogeometric analysis; unstructured T-splines; thin-shell; Bézier extraction; integration mapping

Cite this article

YUAN Pei , LIU Zhenyu , QIU Chan , TAN Jianrong . Unstructured T-spline-based Isogeometric Analysis for Thin Shells[J]. Journal of Mechanical Engineering, 2018 , 54(15) : 132 -140 . DOI: 10.3901/JME.2018.15.132

References

[1] HUGHES T J R,COTTRELL J A,BAZILEVS Y. Isogeometric analysis:CAD,finite elements,NURBS,exact geometry and mesh refinement[J]. Comput. Methods Appl. Mech. Eng.,2005,194(39-41):4135-4195.
[2] BAZILEVS Y,HSU M-C,SCOTT M A. Isogeometric fluid-structure interaction analysis with emphasis on non-matching discretizations,and with application to wind turbines[J]. Comput. Methods Appl. Mech. Engrg.,2012,249-252:28-41.
[3] 吴紫俊,黄正东,左兵权,等. 等几何分析研究概述[J]. 机械工程学报,2015,51(5):114-129. WU Zijun,HUANG Zhengdong,ZUO Bingquan,et al. Perspectives on isogeometric analysis[J]. Journal of Mechanical Engineering,2015,51(5):114-129.
[4] BUFFA A,SANGALLI G,VÁZQUEZ R. Isogeometric methods for computational electromagnetics:B-spline and T-spline discretizations[J]. Journal of Computational Physics,2014,257:1291-1320.
[5] KIENDL J,SCHMIDT R,WÜCHNER R,et al. Isogeometric shape optimization of shells using semi-analytical sensitivity analysis and sensitivity weighting[J]. Comput. Methods Appl. Mech. Engrg.,2014,274:148-167.
[6] 蔡守宇,张卫红,李杨. 基于面片删减的带孔结构等几何形状优化方法[J]. 机械工程学报,2013,49(13):150-157. CAI Shouyu,ZHANG Weihong,LI Yang. Isogeometric shape optimization method with patch removal for holed structures[J]. Journal of Mechanical Engineering,2013,49(13):150-157.
[7] TAVAKKOLI S M,HASSANI B. Isogeometric topology optimization by using optimality criteria and implicit function[J]. International Journal of Optimization in Civil Engineering,2014,4(2):151-163.
[8] HASSANI B,KHANZADI M,TAVAKKOLI S M. An isogeometrical approach to structural topology optimization by optimality criteria[J]. Struct. Multidisc. Optim.,2012,45:223-233.
[9] BENSON D J,BAZILEVS Y,HSU M C,et al. Isogeometric shell analysis:The Reissner-Mindlin shell[J]. Comput. Methods Appl. Mech. Engrg.,2010,199:276-289.
[10] DORNISCH W,KLINKEL S,SIMEON B. Isogeometric Reissner-Mindlin shell analysis with exactly calculated director vectors[J]. Comput. Methods Appl. Mech. Engrg.,2013,253:491-504.
[11] KIENDL J,BLETZINGER K U,LINHARD J,et al. Isogeometric shell analysis with Kirchhoff-Love elements[J]. Comput. Methods Appl. Mech. Engrg.,2009,198:3902-3914.
[12] SCOTT M A,SIMPSON R N,EVANS J A,et al. Isogeometric boundary element analysis using unstructured T-splines[J]. Comput. Methods Appl. Mech. Engrg.,2013,254:197-221.
[13] KIENDL J,BAZILEVS Y,HSU M C,et al. The bending strip method for isogeometric analysis of Kirchhoff-Love shell structures comprised of multiple patches[J]. Computer Methods in Applied Mechanics and Engineering,2010,199:2403-2416.
[14] SEDERBERG T W,ZHENG J,BAKENOV A,et al. T-Splines and T-NURCCS[J]. ACM Trans. Graph.,2003,22(3):477-484.
[15] BAZILEVS Y,CALO V M,COTTRELL J A,et al. Isogeometric analysis using T-splines[J]. Comput. Methods Appl. Mech. Engrg.,2010,199:229-263.
[16] SCOTT M A,BORDEN M J,VERHOOSEL C V,et al. Isogeometric finite element data structures based on Bézier extraction of T-splines[J]. Int. J. Numer. Meth. Engng,2011,88:126-156.
[17] SCOTT M A,HUGHES T J R,SEDERBERG T W,et al. An integrated approach to engineering design and analysis using the autodesk t-spline plugin for rhino3d[C]//ICES REPORT,The Institute for Computational Engineering and Sciences,The University of Texas,Austin,2014,14-33.
[18] DIMITRI R,LORENZIS L D,SCOTT M A,et al. Isogeometric large deformation frictionless contact using T-splines[J]. Comput. Methods Appl. Mech. Engrg.,2014,269:394-414.
[19] BUFFA A,SANGALLI G,VÁZQUEZ R. Isogeometric methods for computational electromagnetics:B-spline and T-spline discretizations[J]. Journal of Computational Physics,2014,257:1291-1320.
[20] SEDERBERG T W,CARDON D L,FINNIGAN GT,et al. T-spline simplification and local refinement[J]. ACM Trans. Graph.,2004,23(3):276-283.
[21] WANG A,ZHAO G,LI Y-D. An influence-knot set based new local refinement algorithm for T-spline surfaces[J]. Expert Systems with Applications,2014,41:3915-3921.
[22] GUO Y,RUESS M. Weak Dirichlet boundary conditions for trimmed thin isogeometric shells[J]. Computers and Mathematics with Applications,2015,70:1425-1440.
[23] RUESS M,SCHILLINGER D,BAZILEVS Y,et al. Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method[J]. Int. J. Numer. Meth. Engng.,2013,95:811-846.
[24] WANG D,XUAN J. An improved NURBS-based isogeometric analysis with enhanced treatment of essential boundary conditions[J]. Comput. Methods Appl. Mech. Engrg.,2010,199:2425-2436.
[25] KIM H J,SEO Y D,YOUN S K. Isogeometric analysis for trimmed CAD surfaces[J]. Comput. Methods Appl. Mech. Engrg.,2009,198:2982-2995.
[26] REDDY J. Theory and analysis of elastic plates and shells[D]. Boca Raton:CRC Press,Taylor and Francis,2007.
[27] BELYTSCHKO T,STOLARSKI H,LIU W K,et al. Stress projection for membrane and shear locking in shell finite elements[J]. Comput. Methods Appl. Mech. Engrg.,1985,51:221-258.
Options
Outlines

/

〈 〉

　 Copyright © Journal of Mechanical Engineering, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd,.