To study the numerical relationship between temperature distribution and structural characteristics of the small induction motor, taking a set of total enclosed fan-cooled(TEFC) induction motor as the research object, on the basis of fluid mechanics and heat transfer theories, considering the structural characteristics that the induction motor stator winding is offline, a flow and heat transfer coupled mathematical and physical 3D model is built and the model contains the centrifugal fan and junction box structure, etc. Using the finite volume element method, the three-dimensional fluid field and temperature field coupling calculation .Based on the precise experimental data, the sensitivity of the temperature rise affected by the internal structure of the motor is illustrated in detail. The results show that the transverse brace on the temperature distribution of the motor has a great influence and lead to its position corresponding to the winding exist secondary temperature rising process. At the same time, the fan with the self-reliance in rotor has good heat dissipation effect for stator end windings, The above results for the mechanical structural optimization of small and medium-sized motor provides a certain practical reference.
DING Shuye
,
LI Zhongyu
,
WANG Yong
,
GUAN Tianyu
. Temperature Sensitivity Investigation of Considering the Structural Characteristics of TEFC Induction Motor[J]. Journal of Mechanical Engineering, 2015
, 51(24)
: 139
-145
.
DOI: 10.3901/JME.2015.24.139
[1] 陈世坤. 电机设计[M]. 北京：机械工业出版社, 2000. CHEN Shikun. Electrical machines design[M]. Bejing：China Machines Press, 2000.
[2] 丁树业, 郭长光, 郭保成, 等. 双馈水轮发电机风摩损耗数值研究[J]. 华中科技大学学报, 2014, 42(2)：26-30.DING Shuye, GUO Changguang, GUO Baocheng, et al. Numerical research of wind friction loss for double-fed hydro-turbine generator[J]. Journal of Huazhong University of Science and Technology, 2014, 42(2)：26-30.
[3] 李俊卿, 胡继伟. 汽轮发电机定子通风沟中三维流体 场的分析和计算[J]. 大电机技术, 2010(1)：19-22. LI Junqing, HU Jiwei. 3D fluid field calculation and analysis in stator radial ventilation ducts of turbo generators[J]. Large Electric Machine, 2010(1)：19-22.
[4] JUNGREUTHMAYER C, BAUML T, WINTER O, et al. Heat and fluid flow analysis of an internal permanent magnet synchronous machine by means of computational fluid dynamics[C]//2011 IEEE International on Electric Machines and Drives Conference, 2011：515-520.
[5] ARMOR A F, CHADM V K. Heat flow in the stator core of large turbine generators by the method of three dimensional finite elements：PartⅠ：Analysis by scalar potential formulation[J]. IEEE Trans. on Power Apparatus and Systems, 1976(5)：1648-1668.
[6] MAXIMINI M, KOGLIN H J. Determination of the absolute rotor temperature of squirrel cage induction machines using measurable variables[J]. IEEE Transactions on Energy Conversion, 2004, 19(1)：34-39.
[7] KRAL C, HABETLER T G, HARLEY R G. Rotor temperature estimation of squirrel-cage induction motors by means of a combined scheme of parameter estimation and a thermal equivalent model[J]. IEEE Transactions on Industry Applications, 2004, 40(4)：1049-1056.
[8] 王治军, 高忠峰, 周茜. 感应电机三维温度场模与仿真计算[J]. 船电技术, 2014, 34(7)：30-34. WANG Zhijun, GAO Zhongfeng, ZHOU Xi. Modeling and simulation calculating of an asynchronous motor in 3D thermal field[J]. Marine Electric & Electronic Engineering, 2014, 34(7)：30-34.
[9] 李伟力, 李守法, 谢颖, 等. 感应电动机定转子全域温度场数值计算及相关因素敏感性分析[J]. 中国电机工程学报, 2004, 27(24)：85-91.LI Weili, LI Shoufa, XIE Ying, et al. Stator-rotor coupled thermal field numerical calculation of induction motors and correlated factors sensitivity analysis[J]. Proceedings of the CSEE, 2004, 27(24)：85-91.
[10] GNACINSKI P, PEPLINSKI M, SZWEDA M. The effect of subharmonics on induction machine heating[C]The //13th International Power Electronics and Motion Control Conference. Poland：Poznan University of Technology, 2008：826-829.
[11] MENDES A M S, QUISPR E C, FERNÁNDEZ X M L. Influence of the positive sequence voltage on the temperature of three-phase induction motors [C]//2010 XIX International Conference on Electrical Machines, Rome, 2010：1-6.
[12] SARKAR D, MUKHERJEE P K, SEN S K. Use of 3-dimensional finite elements for computation of temperature distribution in the stator of an induction motor[J]. IEE Proceeding B Electric Power Application, 1991, 138(2)：75-86.
[13] HWANG C C, WU S S, JIANGY. Novel approach to the solution of temperature distribution in the stator of an induction motor[J]. IEEE Transactions on Energy Conversion, 2000, 15(4)：401-406.
[14] SANG-BIN L, HABETLER T G , HARLEY R G , et al. An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring[J]. IEEE Transactions on Energy Conversion, 2002, 17(1)：7-15.
[15] KRAL C, HABETLER T G , HARLEY R G , et al. Rotor temperature estimation of squirrel-cage induction motors by means of a combined scheme of parameter estimation and a thermal equivalent model[J]. IEEE Trans. on Industry Applications, 2004, 40(4)：1049-1057.
[16] FEYZI M R, PARKER A M. Heating in deep-bar rotor cages[J]. IEE Proc. Electr. Power Appl., 1997, 144(4)：271-276.
[17] BOGLIETTI A, CAVAGNINO A. TEFC induction motors thermal models：A parameter sensitivity analysis[J]. IEEE Trans. on Industry Applications, 2005, 41(3)：756-763.
[18] TATON D, BOGLIETTI A, CAVAGNINO A. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors[J]. IEEE Trans. on Energy Conversion, 2005, 20(3)：620-628.
[19] BOGLIETTI A, CAVAGNINO A, STATON D A. Thermal sensitivity analysis for TEFC induction motors[J]. Second International Conference on Power Electronics, Machines and Drives, 2004, 1：160-165.
[20] 张奕. 传热学[M]. 南京：东南大学出版社, 2004.ZHANG Yi. Heat transfer[M]. Nanjing：Southeast University Press, 2004.
