Journal of Mechanical Engineering >

2018 , Vol. 54 >Issue 11: 39 - 48

DOI: https://doi.org/10.3901/JME.2018.11.039

Three-dimensional Tolerance Modeling and Precision Analysis of Flexible Body Based on the Assembly Load

  • MU Xiaokai ,
  • SUN Qingchao ,
  • SUN Kepeng ,
  • SUN Wei
Expand
  • School of Mechanical Engineering, Dalian University of Technology, Dalian 116024

Received date: 2017-08-24

  Revised date: 2017-12-26

  Online published: 2018-06-05

Fold

Abstract

The traditional precision design only considers the influence of geometric tolerances while not involving the parts deformation of under assembly load. In order to ensure the reliability and stability of mechanical system in the work process, not only to ensure that the parts have a good design performance and manufacturing quality in the process of product design and manufacturing, more important is to ensure the matching performance of the components in the assembly process. It takes a horizontal machining center as an example, the deformation data information of the parts under load effect is obtained by the finite element method. A comprehensive three-dimensional mathematical model for load deformation deviation of the parts is established based on the small displacement torsos theory, the homogeneous coordinate transformation theory and the surface authentication idea. The analysis results show that the deformation deviation of the parts under assembly load displays the trend of transfer and accumulation, and the cumulative deformation deviation at the end of the system reaches -0.024 9 mm. Therefore, the influence of the load deformation deviation on the precision of the mechanical system cannot be neglected. In the design stage of 3D tolerance analysis, the dimension tolerance, the geometric tolerance and the load deformation deviation on the assembly precision of the mechanical system should be considered comprehensively, which will form a mechanism of coordination and protection for the precision of the whole machine, and then to provide theoretical and technical support for improving the overall performance of complex precision mechanical systems.

Key words： precise mechanic system; 3D tolerance analysis; assembly load; deformation deviation

Cite this article

MU Xiaokai , SUN Qingchao , SUN Kepeng , SUN Wei . Three-dimensional Tolerance Modeling and Precision Analysis of Flexible Body Based on the Assembly Load[J]. Journal of Mechanical Engineering, 2018 , 54(11) : 39 -48 . DOI: 10.3901/JME.2018.11.039

References

[1] HILLYARD R C. Dimensions and tolerances in shape design[D]. Cambridge:Cambridge University, 1978.
[2] CHEN H, SUN J, LI Z M, et al. A comprehensive study of three dimensional tolerance analysis methods[J]. Computer-Aided Design, 2014, 53:1-13.
[3] ROY U, LI B. Representation and interpretation of geometric tolerances for polyhedral objects——Ⅰ. From tolerances[J]. Computer-Aided Design, 1998, 30(2):151-161.
[4] ROY U, LI B. Representation and interpretation of geometric tolerances for polyhedral objects——Ⅱ.:Size, orientation and position tolerances[J]. Computer-Aided Design, 1999, 31(4):273-285.
[5] ZONG Y, MAO J. Tolerance mathematical modeling and analysis method based on control points of geometric elements[J]. Computer-Aided Design and Applications, 2015, 12(6):723-732.
[6] TAKAHASHI A, YOSHIDA A, THASANA W, et al. Analysis of kinematic motion deviations of machining centers based on geometric tolerances[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2014, 8(4):1-12.
[7] VIGNAT F, FRANCOIS V. 3D transfer of tolerances using a SDT approach:Application to turning process[J]. Journal of Computing and Information Science in Engineering, 2003, 3(1):45-53.
[8] 钟艳如,覃裕初,黄美发,等. 基于特征表面和空间关系的公差表示模型[J]. 机械工程学报, 2013, 49(11):161-170. ZHONG Yanru, QIN Yuchu, HUANG Meifa, et al. Tolerance representation model based on feature surfaces and spatial relations[J]. Journal of Mechanical Engineering, 2013, 49(11):161-170.
[9] 程彬彬,王志越,黄美发,等. 装配体三维公差建模及分析研究[J]. 机械设计与制造, 2016(4):76-79. CHENG Binbin, WANG Zhiyue, HUANG Meifa, et al. Research on assembly 3D tolerance modeling and analysis[J]. Machinery Design and Manufacture, 2016(4):76-79.
[10] 唐哲敏,黄美发,孙永厚. 基于齐次坐标变换的统计装配公差建模[J]. 计算机集成制造系统, 2017, 23(3):455-464. TANG Zhemin, HUANG Meifa, SUN Yonghou. Assembly statistic tolerance modeling based on homogeneous transformation[J]. Computer Integrated Manufacturing System, 2017, 23(3):455-464.
[11] 孙永厚,肖振泉,黄美发,等. 基于实际工况的零件公差规范设计方法[J]. 组合机床与自动化加工技术, 2016(5):9-12. SUN Yong hou, XIAO Zhenquan, HUANG Meifa, et al. The specification design of tolerance based on working load[J]. Modular Machine Tool and Automatic Manufacturing Technique, 2016(5):9-12.
[12] JIN S, ZHAO F, SUN S, et al. The mechanical assembly precision analysis considering actual working condition[C]//International Conference on Mechanical Design. Springer, Singapore, 2017:73-96.
[13] LIU M, LIU C, XING L, et al. Study on a tolerance grading allocation method under uncertainty and quality oriented for remanufactured parts[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(5-8):1265-1272.
[14] LIU T, CAO Y, WANG J, et al. Assembly error calculation with consideration of part deformation[J]. Procedia CIRP, 2016, 43:58-63.
[15] SUN W, MU X K, SUN Q C, et al. The grouping and matching of three dimensional deviation based on homogeneous transformation and Taguchi theory[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2017, 11(1):JAMDSM0010-JAMDSM0010.
[16] GHIE W, LAPERRIERE L, DESROCHERS A. Statistical tolerance analysis using the unified Jacobian-Torsor model[J]. International Journal of Production Research, 2010, 48(15):4609-4630.
[17] ZHOU B, WANG S, FANG C, et al. Geometric error modeling and compensation for five-axis CNC gear profile grinding machine tools[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(5-8):2639-2652.
[18] CAO H, ZHU L, LI X, et al. Thermal error compensation of dry hobbing machine tool considering workpiece thermal deformation[J]. The International Journal of Advanced Manufacturing Technology, 2016, 86(5-8):1739-1751.
[19] 李冬英,李梦奇,张根保,等. 元动作装配单元误差源及误差传递模型研究[J]. 机械工程学报, 2015, 51(17):146-155. LI Dongying, LI Mengqi, ZHANG Genbao, et al. Mechanism analysis of deviation sourcing and propagation for meta-action assembly unit[J]. Journal of Mechanical Engineering, 2015, 51(17):146-155.
[20] 宁峰平,姚建涛,安静涛,等. 装配位置偏差对航天精密轴承磨损的影响[J]. 机械工程学报, 2017, 53(11):68-74. NING Fengping, YAO Jiantao, AN Jingtao, et al. Effect of assembly situation variation on wear of space precision bearings[J]. Journal of Mechanical Engineering, 2017, 53(11):68-74.
[21] 冯(龙天),洪军,郭俊康,等. 基于新一代产品几何技术规范的工作载荷下公差建模[J]. 计算机集成制造系统, 2013, 19(7):1500-1508. FENG Yan, HONG Jun, GUO Junkang, et al. Tolerance modeling of working load based on geometrical product specifications[J]. Computer Integrated Manufacturing System, 2013, 19(7):1500-1508.
[22] 刘伟东,宁汝新,刘检华,等. 机械装配偏差源及其偏差传递机理分析[J]. 机械工程学报, 2012, 48(1):156-168. LIU Weidong, NING Ruxin, LIU Jianhua, et al. Mechanism analysis of deviation sourcing and propagation for mechanical assembly[J]. Journal of Mechanical Engineering, 2012, 48(1):156-168.
[23] BOURDET P, CLEMENT A. A study of optimal-criteria identification based on the small displacement screw model[J]. Annals of the CIRP, 1988, 37(1):503-506.
[24] BRIOT S, KHALIL W. Homogeneous transformation matrix[M]. New York:Dynamics of Parallel Robots. Springer International Publishing, 2015.
[25] CHEN H, JIN S, LI Z, et al. A comprehensive study of three dimensional tolerance analysis methods[J]. Computer-Aided Design, 2014, 53:1-13.
Options
Outlines

/

〈 〉

　 Copyright © Journal of Mechanical Engineering, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd,.