The topology configuration of traditional porous structure is single, lack of scientific design method for guidance. In order to design periodic lattice structure with high shear strength. The optimization model of micro-cellular materials based on the properties of macrostructures which focused on the periodic base cell for finding a micro-structural topology with the maximum shear modulus under a prescribed volume and mechanic constraint is built based on topology optimization technique. By solving the model on modified optimal algorithm, the mechanical equivalent properties are deduced according to the optimized result, the characterization of shear performance with respect to microstructural geometrical parameters is obtained by considering the transverse shear deformation and the flexibility of the cell wall. Finally, the obtained lattice structure is manufactured, and then the shear properties are tested, it can be concluded that the measured shear modulus of the lattice structure is higher than those of hexagonal honeycomb structures, which demonstrates the excellence shearing performance of the periodic lattice structure. Results show that the proposed method can be effectively applied to the design of periodic lattice structure with great shear performance.
[1] CADMAN J E, ZHOU S, CHEN Y, et al. On design of multi-functional microstructural materials[J]. Journal of Materials Science, 2013, 48(48):51-66.
[2] BENDSOE M P, KIKUCHI N. Generating optimal topologies in optimal design using a homogenization method[J]. Computer Methods in Applied Mechanics & Engineering, 1988, 71(2):197-224.
[3] BENDSOE M P, SIGMUND O. Material interpolations in topology optimization[J]. Archive of Applied Mechanics, 1999, 69:635-654.
[4] SIGMUND O. Materials with prescribed constitutive parameters:An inverse homogenization problem[J]. International Journal of Solids & Structures, 1994, 31(17):2313-2329.
[5] SIGMUND O, TORQUATO S. Composite with extremal thermal expansion coefficients[J]. Applied Physics Letters, 1996, 69(21):3203-3205.
[6] YIN L Z, YANG W. Optimality criteria method for topology optimization under multiple constraints[J]. Computers & Structures, 2001, 97:1839-1850.
[7] 张卫红, 汪雷, 孙士平. 基于导热性能的复合材料微结构拓扑优化设计[J]. 航空学报, 2006, 27(6):1229-1233. ZHANG Weihong, WANG Lei, SUN Shiping. Topology optimization for microstructures of composite materials based on thermal conductivity[J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(6):1229-1233.
[8] ZHANG W H, DAI G M, WANG F W, et al. Using strain energy-based prediction of effective elastic properties in topology optimization of material microstructures[J]. Acta Mechanica Sinica, 2007, 23(1):77-89.
[9] ZHANG W H, WANG F W, DAI G M. Topology optimal design of material microstructures using strain energy-based method[J]. Chinese Journal of Aeronautics, 2007, 20(4):320-326.
[10] HUANG X D, RADMAN A, XIE Y M. Topological design of microstructures of cellular materials for maximum bulk or shear modulus[J]. Computational Materials Science, 2011, 50(6):1861-1870.
[11] HUANG X D, XIE Y M, Evolutionary topology optimization of continuum structures[J]. Finite Elements in Analysis & Design, 2011, 47(8):942-948.
[12] KELSEY S, GELLATLY R A, CLARK B W. The shear modulus of foil honeycomb cores:A theoretical and experimental investigation on cores used in sandwich construction[J]. Aircraft Engineering and Aerospace Technology, 1958, 30(10):294-302.
[13] 梁森, 陈花玲, 梁天锡. 蜂窝夹芯胞元壳的屈曲特性研究[J]. 机械工程学报, 2004, 40(12):90-95. LIANG Sen, CHEN Hualing, LIANG Tianxi. Buckling study on a thin-walled cellular shell of honeycomb sandwich structure[J]. Chinese Journal of Mechanical Engineering, 2004, 40(12):90-95.
[14] SHEN H S, XIANG Y. Buckling and postbuckling of anisotropic laminated cylindrical shells under combined axial compression and torsion[J]. Composite Structures, 2008, 84(4):375-386.
[15] SHI G, TONG P. Equivalent transverse shear stiffness of honeycomb cores[J]. International Journal of Solids & Structures, 1995, 32(10):1383-1393.
[16] BARTOLOZZI G, BALDANZINI N, PIERINI M. Equivalent properties for corrugated cores of sandwich structures:A general analytical method[J]. Composite Structures, 2014, 108:736-746.
[17] PAN S D, WU L Z, SUN Y G. Transverse shear modulus and strength of honeycomb cores[J]. Composite Structures, 2008, 84(4):369-374.
[18] HAN B, YU B, XU Y, et al. Foam filling radically enhances transverse shear response of corrugated sandwich plates[J]. Materials & Design, 2015, 77:132-141.
[19] QIAO P, XU X F. Refined analysis of torsion and in-plane shear of honeycomb sandwich structures[J]. Journal of Sandwich Structures & Materials, 2005, 7(4):289-305.
[20] LI X, LI G, WANG C H, et al. Optimum design of composite sandwich structures subjected to combined torsion and bending loads[J]. Applied Composite Materials, 2012, 19(3-4):315-331.
[21] KAMINAKIS N T, DROSOPOULOS G A, STAVROULAKIS G E. Design and verification of auxetic microstructures using topology optimization and homogenization[J]. Archive of Applied Mechanics, 2015, 85(9-10):1289-1306.
[22] XIA L, BREITKOPF P. Design of materials using topology optimization and energy-based homogenization approach in Matlab[J]. Structural & Multidisciplinary Optimization, 2015, 52(6):1229-1241.
[23] BENDOSE M P, SIGMUND O. Topology optimization:theory, methods and applications[M]. New York:Springer, 2003.
[24] 焦洪宇, 周奇才, 李文军, 等. 基于变密度法的周期性拓扑优化[J]. 机械工程学报, 2013, 49(13):132-138. JIAO Hongyu, ZHOU Qicai, LI Wenjun, et al. Periodic topology optimization using variable density method[J]. Journal of Mechanical Engineering, 2013, 49(13):132-138.
[25] 王宪杰, 张洵安. 基于宏观性能的微观多孔材料拓扑优化[J]. 功能材料, 2014(18):18078-18082. WANG Xianjie, ZHANG Xunan. Topology optimization of microstructures of cellular material based on the properties of macrostructures[J]. Journal of Functional Materials, 2014(18):18078-18082.
[26] DU Y, CHEN D. Suppressing gray-scale elements in topology optimization of continua using modified optimality criterion methods[J]. Computer Modeling in Engineering & Sciences, 2012, 86(1):53-70.
[27] 龙凯, 赵红伟. 抑制灰度单元的改进优化准则法[J]. 计算机辅助设计与图形学学报, 2010, 22(12):2197-2201. LONG Kai, ZHAO Hongwei. A modified optimality criterion method for gray elements suppression[J]. Journal of Computer-Aided Design & Computer Graphics, 2010, 22(12):2197-2201.
[28] YIN L, WEI Y. Optimality criteria method for topology optimization under multiple constraints[J]. Computers & Structures, 2001, 79(20-21):1839-1850.
[29] GIBSON L J, ASHBY M F. Cellular solids:Structure and properties[M]. 2nd ed. Cambridge:Cambridge University Press, 1997.
[30] GIBSON L J. Modeling the mechanical behavior of cellular materials[J]. Materials Science & Engineering A, 1989, 110(89):1-36.
[31] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. GB/T 1455-2005 夹层结构或芯子剪切性能试验方法[S]. 北京:中国标准出版社, 2005. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. GB/T 1455-2005 test method for shear properties of sandwich constructions or cores[S]. Beijing:Standards Press of China, 2005.
