Autonomous Modal Parameter Extraction Based on Stochastic Subspace Identification

  • ZHANG Yongxiang ,
  • LIU Xin ,
  • CHU Zhigang ,
  • HUANG Di ,
  • WANG Guangjian
Expand
  • 1. College of Aerospace Engineering, Chongqing University, Chongqing 400044;
    2. College of Automotive Engineering, Chongqing University, Chongqing 400044;
    3. General Research Institute, China FAW Corporation Limited, Changchun 130011

Received date: 2017-07-13

  Revised date: 2018-02-12

  Online published: 2018-05-05

Abstract

To remove spurious modes automatically and effectively, to avoid artificial participation in modal model order determination and modal pickup, so as to extract the modal parameter automatically and exactly, a novel autonomous modal parameter extraction method based on stochastic subspace identification method is proposed. Firstly, two stochastic subspace models with different dimension Hankel matrices for operating modal parameter identification are constructed and their poles are computed. On this basis, a crystal stabilization diagram is obtained by matching the same order poles of the two models. Finally, hierarchical clustering analysis is performed to the stabilization diagram and then exact modal parameters are automatically extracted. The effectiveness of the proposed method is verified by the simulation of operational modal analysis for a 5DOF mass-spring-damping system and the experiment for a rectangle plate.

Cite this article

ZHANG Yongxiang , LIU Xin , CHU Zhigang , HUANG Di , WANG Guangjian . Autonomous Modal Parameter Extraction Based on Stochastic Subspace Identification[J]. Journal of Mechanical Engineering, 2018 , 54(9) : 187 -194 . DOI: 10.3901/JME.2018.09.187

References

[1] 王宝元,刘朋科,衡钢,等. 自行火炮工作模态分析试验技术[J]. 兵工学报, 2009, 30(7):253-256. WANG Baoyuan, LIU Pengke, HENG Gang, et al. Operational modal analysis experimental technique used for self-propelled gun[J]. Acta Armam, 2009, 30(7):253-256.
[2] 王文平,项昌乐. 某型复杂变速器壳体的模态研究[J]. 汽车工程, 2007, 29(8):673-676. WANG Wenping, XIANG Changle. Modal analysis of a complicated gearbox housing[J]. Automotive Engineering, 2007, 29(8):673-676.
[3] 楼江雷,唐进元,陈思雨,等. 基于LMS工作模态测试的齿轮箱性能分析[J]. 机械传动, 2002, 36(3):4-7. LOU Jianglei, TANG Jinyuan, CHEN Siyu,et al. Analysis of gearbox performance based on LMS operating modal test[J]. Journal of Mechanical Transmission, 2002, 36(3):4-7.
[4] 王卓,闫维明,叶列平. 网壳结构运行模态分析的模型试验[J]. 清华大学学报, 2011, 51(6):755-759. WANG Zhuo, YAN Weiming, YE Lieping. Experimental study of the operational modal analysis of latticed domes[J]. Journal of Tsinghua University, 2011, 51(6):755-759.
[5] 张义民,张守元,李鹤,等. 运行模态分析中固有模态和谐波模态区分方法研究[J]. 振动与冲击,2009,28(1):64-67. ZHANG Yimin, ZHANG Shouyuan, LI He, et al. Modes in operational modal analysis[J]. Journal of Vibration and Shock, 2009, 28(1):64-67.
[6] ZHANG G W, MA J H, CHEN Z, et al. Automated eigensystem realisation algorithm for operational modal analysis[J]. Journal of Sound and Vibration, 2014, 333(15):3550-3563.
[7] EUGEN N, FRANK J, AKBAR A K, et al. Fully automated operational modal analysis using multi-stage clustering[J]. Mechanical Systems and Signal Processing, 2017, 84:308-323.
[8] 汤宝平,章国稳,陈卓. 基于谱系聚类的随机子空间模态参数自动识别[J]. 振动与冲击, 2012, 31(10):92-96. TANG Baoping, ZHANG Guowen, CHEN Zhuo. Automatic stochastic subspace identification of modal parameters based on hierarchical clustering method[J]. Journal of Vibration and Shock, 2012, 31(10):92-96.
[9] EDWIN R, JEROEN H, GUIDO D R, et al. Fully automated (operational) modal analysis[J]. Mechanical Systems and Signal Processing, 2012, 29(S1):228-250.
[10] FAN J L, ZHANG Z Y, HUA H X. Data processing in subspace identification and modal parameter identification of arch bridge[J]. Mechanical Systems and Signal Processing, 2007, 21(4):1674-1689.
[11] PELIN G B. Automation of the stabilization diagrams for subspace-based system identification[J]. Expert Systems with Applications, 2011, 38(12):14390-14397.
[12] SCIONTI M, LANSLOTS J P. Stabilization diagrams:pole identification using fuzzy clustering techniques[J]. Advances in Engineering Software, 2005, 36:768-779.
[13] FILIPE M, ALVARO C, ELSA C. Online automatic identification of the modal parameters of a long span arch bridge[J]. Mechanical Systems and Signal Processing, 2009, 23(2):316-329.
[14] CARLO R, GIOVANNI F. Development and validation of an automated operational modal analysis algorithm for vibration-based monitoring and tensile load estimation[J]. Mechanical Systems and Signal Processing, 2015, 60-61:512-534.
[15] 章国稳. 环境激励下结构模态参数自动识别与算法优化[D]. 重庆:重庆大学, 2012. ZHANG Guowen. Modal parameter automatic identification for structures under ambient excitation and algorithm optimization[D]. Chongqing:Chongqing University, 2012.
[16] 汤宝平,章国稳,孟利波. 基于模态能量的随机子空间虚假模态剔除[J]. 华中科技大学学报, 2012, 40(3):94-98. TANG Baoping, ZHANG Guowen, MENG Libo. Modal energy-based distinguishing spurious mode obtained from stochastic subspace identification[J]. Journal of Huazhong University of Science and Technology, 2012, 40(3):94-98.
[17] 肖祥, 任伟新. 实时工作模态参数数据驱动随机子空间识别[J]. 振动与冲击, 2009, 28(8):148-206. XIAO Xiang, REN Weixin. Improved data-driven stochastic subspace identification of online operational modal parameters[J]. Journal of Vibration and Shock, 2009, 28(8):148-206.
Outlines

/