The canned pump avoids the problem of rotating seal. However, the tilting pad thrust bearings in the canned pump have a large size and moment of inertia, which leads to an obvious centrifugal inertia effect. A multi-field coupled numerical model of tilting pad thrust bearings is established based on the infinite element method. Two key values of assembly gaps in flywheel design are discussed. There should be at least 1.74 mm between the shield and the outer ring. The centrifugal deformations and corresponding performances of tilting pad thrust bearings of different sizes and speed are analyzed. The rotating speed should be controlled within 3 600 r/min. Finally, the outer diameter of inner hub of flywheel is discussed and the optimal value ranges from 0.63 to 0.67 m.
SONG Zhixiang
,
LIU Ying
,
GUO Fei
,
LIU Xiangfeng
,
WANG Yuming
. Influence of Centrifugal Deformation of Thrust Collar in Water-lubricated Tilting-pad Thrust Bearings of Nuclear Canned Pump[J]. Journal of Mechanical Engineering, 2018
, 54(1)
: 127
-135
.
DOI: 10.3901/JME.2018.01.127
[1] 孙汉虹. 第三代核电技术AP1000[M]. 北京:中国电力出版社,2010. SUN Hanhong. The third generation nuclear power technology[M]. Beijing:China Power Press,2010.
[2] 欧阳武,张帆,王建磊,等. 低黏润滑轴承可靠性强化试验中磁力加载研究[J]. 机械工程学报,2015,51(4):199-205. OUYANG Wu,ZHANG Fan,WANG Jianlei,et al. Research on magnetic loading in reliability enhancement testing of low viscosity lubricated bearings[J]. Journal of Mechanical Engineering,2015,51(4):199-205.
[3] 金飞. 核电站屏蔽主泵推力轴承运行与维护探讨[J]. 中国高新技术企业,2015(13):137-139. JIN Fei. Discussion on the operation and maintenance of the shield main pump thrust bearing in the nuclear power station[J]. China High-Tech Enterprises,2015(13):137-139.
[4] 黄滨,吴军令,武中德,等. 双向推力轴承支承结构对润滑性能的影响[J]. 排灌机械工程学报,2012,30(6):690-694. HUANG Bin,WU Junling,WU Zhongde,et al. Effects of support structure on lubricating properties of bi-directional thrust bearings[J]. Journal of Drainage and Irrigation Machinery Engineering,2012,30(6):690-694.
[5] 蒋秀龙,方静辉,汪久根. 入口坡形对推力滑动轴承润滑性能的影响[J]. 润滑与密封,2010,35(6):24-28. JIANG Xiulong,FANG Jinghui,WANG Jiugen. Effects of Inlet ramps on thermo hydrodynamic lubrication of thrust bearing[J]. Lubrication Engineering,2010,35(6):24-28.
[6] YUAN Xiaoyang,ZHU Jun,CHEN Zhilann,et al. A three-dimensional TEHD model and an optimum surface profile design of pivoted pad thrust bearings with large dimensions[J]. Tribology Transactions,2003,46(2):153-160.
[7] 黄成铭. 反应堆主泵水润滑推力轴承的设计研究[J]. 机械,1990(3):4-11. HUANG Chengming. The design and research of the water-lubricated thrust bearings in the main reactor pump[J]. Machinery,1990(3):4-11.
[8] 陈渭,朱均. 大型推力轴承热弹流动力润滑的性能计算[J]. 机械科学与技术,1994(4):51-55. CHEN Wei,ZHU Jun. Performance of large thrust bearing thermal elastohydrodynamic lubrication[J]. Mechanical Science and Technology for Aerospace Engineering,1994(4):51-55.
[9] 蒋秀龙. 可倾瓦推力滑动轴承弹流润滑研究[D]. 杭州:浙江大学,2011. JIANG Xiulong. TEHD analysis of tilting pad thrust beaing[D]. Hangzhou:Zhejiang University,2011.
[10] 董胜先,马求山. 大型重载推力轴承热弹流计算及尺寸效应[J]. 润滑与密封,2014(8):108-111. DONG Shenxian,MA Qiushan. Thermoelasto-hydrodynamics analysis and size effect of large heavy thrust bearing[J]. Lubrication Engineering,2014(8):108-111.
[11] 何加猛,王小静,祁高安,等. 计入三维热效应对可倾瓦推力轴承动力特性的影响[J]. 上海大学学报,2012,18(5):519-524. HE Jiameng,WANG Xiaojing,QI Gaoan,et al. Influence of considering 3D thermal effects on dynamic characteristics of tilting pad thrust bearing[J]. Journal of Shanghai University,2012,18(5):519-524.
[12] 武中德,张宏,任忠海,等. 小支柱簇双层瓦推力轴承热弹流润滑性能分析[J]. 哈尔滨工业大学学报,2003,35(1):81-84. WU Zhongde,ZHANG Hong,REN Zhonghai,et al. Performance analysis for thermo-elastic-hydrodynamic lubrication of thrust bearing with pins and double layer system[J]. Journal of Harbin Institute of Technology,2003,35(1):81-84.
[13] 曾攀. 基于ANSYS平台有限元分析手册[M]. 北京:机械工业出版社,2011. ZENG Pan. Finite element analysis guide:Modeling and analysis of structure[M]. Beijing:China Machine Press,2011.
[14] CONSTANTINESCU V. Analysis of bearings operating in turbulent regime[J]. Journal of Fluids Engineering,1962,84(1):139-151.
[15] PAN C. A linearized turbulent lubrication theory[J]. Journal of Fluids Engineering,1965:675-688.
[16] 原田正躬,青木弘. スラストすべり軸受の乱流潤滑理論[C]//日本機械学会論文集C編,1987,53(496):2655-2663. HARADA M,HIROSHI A. Turbulent lubrication theory of sliding thrust bearing[C]//JSME International Part C,1987,53(496):2655-2663.
[17] HIRS G. A bulk-flow theory for turbulence in lubricant films[J]. Journal of Tribology,1973,95(2):137-145.
[18] 张振山. 计入非牛顿、变形及表面形貌效应的动载轴承热流体动力润滑分析[D]. 上海:上海交通大学,2014. ZHANG Zhenshan. Analysis of thermohydrodynamic performance of dynamically loaded bearings in consideration of non-netonian,deformation and surface topograhpy[D]. Shanghai:Shanghai Jiao Tong University,2014.
