Rayleigh wave is employed to evaluate surface stress of laser cladding coating, combined with static load tensile test, acoustoelastic relation curve of Rayleigh wave propagating in Fe314 laser cladding layer is established; By fitting the acoustoelastic relation curve, laser cladding material acoustoelastic coefficient are calibrated and the acoustoelastic formula is established based on this. The experimental results indicate that the acoustoelastic formula can be used to evaluate surface stress of laser cladded coatings. Then it analyzes effects of microstructure and residual stress of the laser cladded coating on surface stress experimental values, which shows the effects are significant. The experimental results are close to the actual load after being calibrated by the initial stress from acoustoelastic formula calculation. Due to the inhomogeneous deformation of anisotropic laser cladding layer during tensile process, the error of high stress stage is significantly greater than that of low stress phase when Rayleigh wave is employed to detect surface stress of Fe314 laser cladding layer.
DONG Shiyun
,
YAN Xiaoling
,
XU Binshi
. Influence of Microstructure and Residual Stress on Surface Stress Measurement of Laser Cladding Layer by Rayleigh Wave[J]. Journal of Mechanical Engineering, 2015
, 51(24)
: 50
-56
.
DOI: 10.3901/JME.2015.24.050
[1] 张晓东，董世运，王志坚，等. 激光再制造金属零件熔覆层组织及耐磨性能[J]. 焊接学报，2010，31(2)：75-78.ZHANG Xiaodong，DONG Shingyun，WANG Zhijian，et al. Microstructure and wear resistance of clad layer on laser remanufacturing metal pieces[J]. Transactions of the China Welding Institution，2010，31(2)：75-78.
[2] 马维，潘文霞，张文宏，等. 热喷涂涂层中残余应力分析和检测研究进展[J]. 力学进展，2002，32(1)：41-56. MA Wei，PAN Wenxia，ZHANG Wenhong，et al. A review of researches on the residual stress in thermal spray coatings[J]. Advances in Mechanics，2002，32(1)：41-56.
[3] LIU Bin，DONG Shiyun，XU Binshi，et al. Length of reference signal affects surface stress measurement of thin laser cladding Fe314 alloy coating[J]. International Journal of Minerals，Metallurgy and Materials，2012，19(6)：549-553.
[4] 冯宝富，赵恒华，蔡光起. 平面磨削残余应力的测试方法[J]. 机械制造，2003，41(461)：35-37. FENG Baofu，ZHAO Henghua，CAI Guangqi. Test method for residual stress in plane grinding[J]. Machinery Manufacturing，2003，41(461)：35-37.
[5] 陈志红，任学平，陈冷，等. 金属板材服役状态下应力场的动态检测方法[J]. 机械工程学报，2008，44(11)：267-271.CHEN Zhihong，REN Xueping，CHEN Leng，et al. Online measurement method on stress field of metal of plates in service state[J]. Chinese Journal of Mechanical Engineering，2008，44(11)：267-271.
[6] 李峻宏，高建波，李际周，等. 中子衍射残余应力无损测量与谱仪研发[J]. 无损检测，2010，32(10)：765-769.LI Junhong，GAO Jianbo，LI Jizhou，et al. Nondestructive measurement for residual stress by neutron diffraction and spectrum instrument research and development[J]. Nondestructive Testing，2010，32(10)：765-769.
[7] SHI Changliang，DONU Shiyun，XU Binshi，et al. Stress concentration degree affects spontaneous magnetic signals of ferromagnetic steel under dynamic tension load[J]. NDT&.E International，2010，43(1)：8-12.
[8] JUNGE M，QU Jianmin，JACOBS L J. Relationship between Rayleigh wave polarization and state of stress[J]. Ultrasonics，2006(44)：233-237.
[9] SIAMAK A，RASOOL M. Improvement in accuracy of the measurements of residual stresses due to circumferential welds in thin-walled pipe using Rayleigh wave method[J]. Nuclear Engineering and Design，2009(239)：2201-2208.
[10] 刘彬，董世运，徐滨士，等. 初始应力对瑞利波评价45钢表层应力的影响[J]. 材料工程，2012(5)：35-39.LIU Bin，DONG Shiyun，XU Binshi，et al. Influence of initial stress on surface stress measurement of 45 steel by rayleigh wave[J]. Materials Engineering，2012(5)：35-39.
[11] HIRAO M，FUKUOKA H，HON K. Acoustoelastic of effect of Rayleigh wave in lsotropic material[J]. Journal of Applied Mechanics，1981，48(3)：119-124.
[12] HUSSON D. A perturbation theory for the acoustoelastic effect of surface waves[J]. American Institute of Physics，1985，57(5)：1562-1568.
[13] DUQUENNOY M，OUAFTOUH M，QURAK M. Ultrasonic evaluation of stress in orthotropic materials using Rayleigh waves[J]. NDE&E International，1999，32：189-199.
[14] DUQUENNOY M，OUAFTOUH M，QURAK M. Determination of stresses in aluminium alloy using optical detection of Rayleigh waves[J]. Ultrasonics，1999，37：365-372.
[15] 闫晓玲，董世运，徐滨士，等. 超声声表面波检测信号时差的倒频谱分析[J]. 振动与冲击，2013，32(12)：159-162. YAN Xiaoling，DONG Shiyun，XU Binshi，et al. Cepstrum analysis method in surface acoustic wave signals time delay estimation[J]. Vibration and Shock，2013，32(12)：159-162.
