To solve the issue of low amplification ratio for the compliant bridge-type mechanism, a three dimensional bridge-type mechanism with combined flexure hinges is proposed, which not only remains the superiority of the conventional bridge-type mechanisms, e.g., structure symmetry, compact size and simple design, but also achieves high amplification ratio. To analyse the performance of the 3D bridge-type mechanism, the statics model is established via the compliance matrix method, based on which a new evaluation index, the relative amplification rate is proposed to measure the displacement loss of the mechanism. Several 3D bridge type mechanisms with three frequently used flexure hinges are analysed by the established model. The results show that the 3D bridge-type mechanism reaches the optimal performance when the V-shaped hinge and the filled leaf hinge are employed in bridge 1 and bridge 2 respectively. Finally, a bridge-type mechanism with amplification ratio of 41 and relative amplification rate of 0.9 is confirmed by FEA simulation and experiments.
CHEN Fangxin
,
GAO Futian
,
DU Zhijiang
,
SUN Lining
,
DONG Wei
. Modeling, Analysis and Experiments of a Three-dimensional Bridge-type Mechanism with Combined Flexure Hinges[J]. Journal of Mechanical Engineering, 2018
, 54(13)
: 110
-116
.
DOI: 10.3901/JME.2018.13.110
[1] DONG Wei, TANG Jiong, DEEB Y E, Design of a linear-motion dual-stage actuation system for precision control[J]. Smart Materials & Structures, 2009, 18(9):095035.
[2] DU Zhijiang, YANG Miao, DONG Wei, et al. Static deformation modeling and analysis of flexure hinges made of a shape memory alloy[J]. Smart Materials & Structures, 2016, 25(11):115029.
[3] HE Gaofa, TANG Yike, ZHOU Chuande, et al. Novel resonant accelerometer with micro leverage fabricated by MEMS technology[J]. Chinese Journal of Mechanical Engineering. 2011, 24(3):495-500.
[4] WANG Liping, JIANG Yao, LI Tiemin. Analytical compliance modelling of serial flexure-based compliant mechanism under arbitrary applied load[J]. Chinese Journal of Mechanical Engineering, 2017, 30(4):951-962.
[5] 王念峰,张志远,张宪民,等,三种两自由度柔顺精密定位平台的性能对比与分析[J]. 机械工程学报, 2016, 49(6):89-96. WANG Nianfeng, ZHANG Zhiyuan, ZHANG Xianmin, et al. Performance comparison and analysis of three 2-DOF compliant precision positioning stages[J]. Journal of Mechanical Engineering, 2016, 49(6):89-96.
[6] 朱大昌,冯文结,安梓铭,整体式平面三自由度全柔顺并联机构构型拓扑优化设计[J]. 机械工程学报, 2015, 51(5):30-36. ZHU Dachang, FENG Wenjie, AN Ziming. Topology optimization integrated design of 3-DOF fully compliant planar parallel manipulator[J]. Journal of Mechanical Engineering, 2015, 51(5):30-36.
[7] JUUTI J, KORDAS K, LONNAKKO R, et al. Mechanically amplified large displacement piezoelectric actuators[J]. Sensors & Actuators A Physical, 2005, 120(1):225-231.
[8] CHOI K B, LEE J J, HATA S. A piezo-driven compliant stage with double mechanical amplification mechanisms[J]. Sensors & Actuators A Physical, 2010, 161(1):173-181.
[9] TANG Hui, LI Yangmin, XIAO Xiao. A novel flexure-based dual-arm robotic system for high-throughput biomanipulations on micro-fluidic chip[C]//Proceedings of the International Conference on Intelligent Robots and Systems, November 3-7, 2013, Tokyo, Japan:IEEE, 2013:1531-1536.
[10] CHEN Chingming, HSU Y C, FUNG R F. System identification of a Scott-Russell amplifying mechanism with offset driven by a piezoelectric actuator[J]. Applied Mathematical Modelling, 2012, 36(6):2788-2802.
[11] LING Mingxiang, CAO Junyi, ZENG Minghua, et al. Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms[J]. Smart Materials & Structures, 2016, 25(7):075022.
[12] LING Mingxiang, CAO Junyi, ZENG Minghua, et al. Modular kinematics and statics modeling for precision positioning stage[J]. Mechanism & Machine Theory, 2017, 107:274-282.
[13] XU Qingsong, LI Yangmin. Analytical modeling, optimization and testing of a compound bridge-type compliant displacement amplifier[J]. Mechanism and Machine Theory, 2011, 46(2):183-200.
[14] 黄卫清,史小庆,王寅,菱形压电微位移放大机构的设计[J]. 光学精密工程, 2015, 23(3):803-809. HUANG Weiqing, SHI Xiaoqing, WANG Yan. Design of diamond piezoelectric micro displacement amplification mechanism[J]. Optics and Precision Engineering, 2015, 23(3):803-809.
[15] LOBONTIU N, GARCIA E. Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms[J]. Computers & Structures, 2003, 81(32):2797-2810.
[16] MA Hongwen, YAO Shaoming, WANG Liquan, et al. Analysis of the displacement amplification ratio of bridge-type flexure hinge[J]. Sensors & Actuators A Physical, 2006, 132(2):730-736.
[17] 刘小院. 基于柔性铰链通用模型的柔性位移放大机构建模方法研究[D]. 西安:西安电子科技大学, 2014. LIU X Y. Modeling of compliant displacement amplifier based on a generalized model for conic flexure hinges[D]. Xi'an:Xidian University, 2014.
[18] KIM J H, KIM S H, KWAK Y K. Development of a piezoelectric actuator using a three-dimensional bridge-type hinge mechanism[J]. Review of Scientific Instruments, 2003, 74(5):2918-2924.
[19] KIM J H, KIM S H, KWAK Y K. Development and optimization of 3-D bridge-type hinge mechanisms[J]. Sensors and Actuators A:Physical, 2004, 116(3):530-538.
