Journal of Mechanical Engineering >

2018 , Vol. 54 >Issue 9: 77 - 85

DOI: https://doi.org/10.3901/JME.2018.09.077

Microstructural Characteristics-based Mechanical Behavior of Aerospace Al-Cu Alloys

  • WANG Gang ,
  • REN Ke ,
  • HU Yisen ,
  • YE Mao ,
  • WANG Shuqing ,
  • RONG Yiming
Expand
  • 1. State Key Laboratory of Tribology & Institute of Manufacturing Engineering, Tsinghua University, Beijing 100084;
    2. Mechanical and Energy Engineering Department, Southern University of Science and Technology, Shenzhen 518055;
    3. Capital Aerospace Machinery Company, Beijing 100076

Received date: 2017-07-06

  Revised date: 2017-11-28

  Online published: 2018-05-05

Fold

Abstract

In recent years, the increasing demand on the international commercial launching has been promoting the development of integrative manufacturing. The deformation control of the structures becomes one of the main problems about the quality control. The porosity, segregation and grain size and other microstructural characteristics in casting have a crucial influence on mechanical behavior of materials in integrative manufacturing processes for aerospace Al-Cu alloys. Understanding the relation between casting defects and mechanical properties is the base to formulate and predict the complicated structural deformation. The distribution of the porosity, chemical composition, and precipitates is quantitatively characterized for the ongoing through-process research. The models are investigated to present the effects of the quench-induced precipitates, porosity and segregation on elongation, yield strength, flow stress, etc. The research deepens the understanding on the evolution of mechanical properties of Al-Cu alloy, which is the base to establish the microstructural characteristics-based constitutive model. It will provide theoretical support and technical guidance for the integrative manufacturing of large aerospace structures.

Key words： microstructures; mechanical behavior; Al-Cu alloy; through-process; large aerospace structures

Cite this article

WANG Gang , REN Ke , HU Yisen , YE Mao , WANG Shuqing , RONG Yiming . Microstructural Characteristics-based Mechanical Behavior of Aerospace Al-Cu Alloys[J]. Journal of Mechanical Engineering, 2018 , 54(9) : 77 -85 . DOI: 10.3901/JME.2018.09.077

References

[1] ZHANG J B. Study on porosity defects of high strength ZL205A castings[J]. Manufacturing Technology Research, 2007, 1:4-8.
[2] STARKE E, STALEY J. Application of modern aluminum alloys to aircraft[J]. Progress in Aerospace Sciences, 1996, 32(2):131-172.
[3] 张钰. 铝合金在航天航空中的应用[J]. 铝加工, 2009(3):50-53. ZHANG Yu. Application of aluminum alloy to aerospace industry[J]. Aluminium Fabrication, 2009(3):50-53.
[4] 李劲风,郑子樵,陈永来,等. 铝锂合金及其在航天工业上的应用[J]. 宇航材料工艺, 2012(1):13-19. LI Jinfeng, ZHENG Ziqiao, CHEN Yonglai, et al. Al-Li alloys and their application in aerospace industry[J]. Aerospace Materials & Technology, 2012(1):13-19.
[5] BILSTEIN R E. National Aeronautics and Space Administration[M]. Washington, D.C.:NASA, 1996.
[6] LIU Chi, LI Qingchun, ZENG Songyan. Numerical simulation of quasi-solid stress, strain and hot cracking during solidification for Al-Cu alloy[J]. Chinese Journal of Mechanical Engineering, 1990, 3(1):36-42.
[7] 黄树海,赵祖德,肖远伦,等. 冷热循环对铝合金锥形件淬火残余应力和加工变形的影响[J]. 机械工程学报, 2010, 46(14):73-78. HAUNG Shuhai, ZHAO Zude, XIAO Yuanlun, et al. Influence of thermal-cooling cycle on both quenching-induced residual stress and machining-induced distortion of aluminum cone-shaped part[J]. Journal of Mechanical Engineering, 2010, 46(14):73-78.
[8] NICHENKO S, STAICU D. Thermal conductivity of porous UO 2:Molecular dynamics study[J]. Journal of Nuclear Materials, 2014, 454(1):315-322.
[9] WARKE V S. Predicting the response of powder metallurgy steel components to heat treatment[D]. Worcester Polytechnic Institute, 2008.
[10] GURSON A L. Continuum theory of ductile rupture by void nucleation and growth:Part I-Yield criteria and flow rules for porous ductile media[J]. Journal of Engineering Materials and Technology, 1977, 99(1):2-15.
[11] TVERGAARD V. Influence of voids on shear band instabilities under plane strain conditions[J]. International Journal of Fracture, 1981, 17(4):389-407.
[12] 沈月,何国球,田丹丹,等. 二次枝晶臂间距对A319铝合金拉伸及疲劳性能的影响[J]. 材料研究学报, 2014, 28(8):587-593. SHEN Yue, HE Guoqiu, TIAN Dandan, et al. Effect of secondary dendrite arm spacing on tensile property and fatigue behavior of A319 aluminum alloy[J]. Chinese Journal of Materials Research, 2014, 28(8):587-593.
[13] 潘杰花,邹勇志,曾建民. 二次枝晶臂间距对A357合金时效动力学的影响[J]. 汽车工程, 2009, 31(5):435-439. PAN Jiehua, ZOU Yongzhi, ZENG Jianmin. The influences of SDAS on the aging kinetics of A357 alloy[J]. Automotive Engineering, 2009, 31(5):435-439.
[14] 李浩. Cu、RE对Al-Cu-Mn铸造铝合金微观组织及力学性能的影响[D]. 郑州:郑州大学, 2014. LI Hao. Effects of Cu and Re on the microstructure and mechanical properities of al-cu-mn casting alloy[D]. Zhengzhou:Zhengzhou University, 2014.
[15] WANG Wengaung, WANG Gang, GUO Guannan, et al. Competitive relationship between thermal effect and grain boundary precipitates on the ductility of an as-quenched Al-Cu-Mn alloy[J]. International Journal of Damage Mechanics, 2016:1056789516683540.
[16] 彭一波, 王罡, 潘尚峰, 等. 考虑动态回复过程的6005A铝合金动态力学模型[J]. 机械工程学报, 2014, 50(10):32-39. PENG Yibo, WANG Gang, PAN Shangfeng, et al. 6005A aluminum dynamic mechanical model considering the dynamic recovery process[J]. Journal of Mechanical Engineering, 2014, 50(10):32-39.
[17] ZHU J D, COCKCROFT S L, MAIJER D M. Modeling of microporosity formation in A356 aluminum alloy casting[J]. Metallurgical and Materials Transactions A, 2006, 37(3):1075-1085.
[18] LU Yao. Experimental investigation and numerical modeling of microporosity formation in aluminum alloy A356[D]. University of British Columbia, 2011.
[19] 贤福超,郭凡,肖文丰. ZL205A合金元素偏析行为[J]. 铸造, 2014, 63(10):995-998. XIAN Fuchao, GUO Fan, XIAO Wenfeng. Study on elements segregation behavior of ZL205A alloy[J]. Foundry, 2014, 63(10):995-998.
[20] 马福民,曲银辉,王涛,等. ZL205A铝合金筒类铸件铸造工艺研究[J]. 铸造, 2014, 63(9):938-941. MA Fumin, QU Yinhui, WANG Tao, et al. Study on casting process for ZL205A sleeve type castings[J]. Foundry, 2014, 63(9):938-941.
[21] 王狂飞,许广涛,周志杰,等. 铸造方法对ZL205A合金砂型铸造组织的影响[J]. 特种铸造及有色合金, 2015(6):629-632. WANG Kuangfei, XU Guangtao, ZHOU Zhijie, et al. Effect of sand mold casting method on microstrusture of ZL205A alloy[J]. Special-cast and Non-ferrous Alloys, 2015(6):629-632.
[22] NADELLA R, ESKIN D G, DU Quan, et al. Macrosegregation in direct-chill casting of aluminium alloys[J]. Progress in Materials Science, 2008, 53(3):421-480.
[23] ROY M J, MAIJER D M, DANCOINE L. Constitutive behavior of as-cast A356[J]. Materials Science and Engineering:A, 2012, 548:195-205.
[24] AFRIN N, CHEN D L, CAO Xinjin, et al. Strain hardening behavior of a friction stir welded magnesium alloy[J]. Scripta Materialia, 2007, 57(11):1004-1007.
[25] TAHREEN N, CHEN D L, NOURI M, et al. Effects of aluminum content and strain rate on strain hardening behavior of cast magnesium alloys during compression[J]. Materials Science and Engineering:A, 2014, 594:235-245.
[26] WANG Wenguang, WANG Gang, HU Yisen, et al. Temperature-dependent constitutive behavior with consideration of microstructure evolution for as-quenched Al-Cu-Mn alloy[J]. Materials Science and Engineering:A, 2016, 678:85-92.
[27] MI Guofa, WANG Kuangfei, GONG Haijun, et al. Microstructure and properties of ZL205 alloy[J]. China Foundry, 2008, 5(1):24-27.
[28] ZHANG Ming, ZHANG Weiwen, ZHAO Haidong, et al. Effect of pressure on microstructures and mechanical properties of Al-Cu-based alloy prepared by squeeze casting[J]. Transactions of Nonferrous Metals Society of China, 2007, 17(3):496-501.
[29] TIRYAKIOĞLU M, SHUEY R T. Quench sensitivity of 2219-T87 aluminum alloy plate[J]. Materials Science and Engineering:A, 2010, 527(18):5033-5037.
[30] ROBINSON J S, CUDD R L, TANNER D A, et al. Quench sensitivity and tensile property inhomogeneity in 7010 forgings[J]. Journal of Materials Processing Technology, 2001, 119(1):261-267.
[31] KLOBES B, STAAB T E M, HAAKS M, et al. The role of quenched-in vacancies for the decomposition of aluminium alloys[J]. Physica Status Solidi (RRL)-Rapid Research Letters, 2008, 2(5):224-226.
[32] HU Yisen, WANG Gang, WANG Wenguang, et al. Light Metals 2017[M]. Springer, 2017.
[33] FLYNN R J, ROBINSON J S. The application of advances in quench factor analysis property prediction to the heat treatment of 7010 aluminium alloy[J]. Journal of Materials Processing Technology, 2004, 153:674-680.
[34] HU Yisen, WANG Gang, WANG Wenguang, et al. Effect of precipitation during quenching on the prediction of the mechanical properties of Al-5%Cu alloy after T6 treatment[J]. Metallurgical and Materials Transactions A, 2017, 48:5667-5677.
[35] SOFYAN B T, RAVIPRASAD K, RINGER S P. Effects of microalloying with Cd and Ag on the precipitation process of Al-4Cu-0.3 Mg (wt%) alloy at 200℃[J]. Micron, 2001, 32(8):851-856.
[36] RINGER S P, HONO K, SAKURAI T. The effect of trace additions of sn on precipitation in Al-Cu alloys:An atom probe field ion microscopy study[J]. Metallurgical and Materials Transactions A, 1995, 26(9):2207-2217.
Options
Outlines

/

〈 〉

　 Copyright © Journal of Mechanical Engineering, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd,.