Due to the complex influence factors in the processing of cemented carbide surface, followed by low efficiency and a high rejection rate. To improve the technology of finishing the curve surface, and obtain the relationship between processing efficiency and contact characteristics in theory, it takes steel M300 as the study objective and establishes the model of residual peak by analyzing the micro contact characteristics of the elastic abrasives. Through analysis of model, the functional relationship between the residual peak removal area and the main parameters affecting the grinding accuracy is derived. Finally, the influence degree of each parameter on the polishing effect and the best parameter combination is gotten and verified by a set of experiments and provide references to hard precise surface polishing.
WU Xiaojun
,
CHEN Zhu
,
ZHOU Tianze
,
MA Changjie
,
SHU Xiao
,
DONG Jianyuan
. Research on Processing Efficiency and Contact Characteristics of M300 Steel Surface Grinding with Elastic Abrasives[J]. Journal of Mechanical Engineering, 2018
, 54(1)
: 171
-177
.
DOI: 10.3901/JME.2018.01.171
[1] 袁巨龙,张飞虎,戴一帆,等. 超精密加工领域科学技术发展研究[J]. 机械工程学报,2010,46(15):161-177. YUAN Julong,ZHANG Feihu,DAI Yifan,et al. Development research of science and technologies in ultra-precision machining field[J]. Journal of Mechanical Engineering,2010,46(15):161-177.
[2] MAKSOUD T M A,ATIA M R. Review of intelligent grinding and dressing operations[J]. Machining Science and Technology,2004,8(2):263-276.
[3] CHEN Weichan,WU Kunling,YAN Biinghwa. A study on the application of newly developed magneto-elastic abrasive to improving the surface roughness of the bore[J]. International Journal of Manufacturing and Technology,2014,73:1557-1566.
[4] WANG X,ZHANG Y,ZHANG FH,et al. Preliminary Investigation of nanoparticle colloid hydrodynamic cavitation jet polishing technology[J]. Nanotechnology and Precision Engineering,2011,9(6):483-487.
[5] 潘日,王振忠,王春锦,等. 自由曲面光学元件气囊抛光进动运动控制技术[J]. 机械工程学报,2013,49(3):186-193. PAN Ri,WANG Zhenzhong,WANG Chunjin,et al. Control techniques of bonnet polishing for free-form optical lenses with precession[J]. Journal of Mechanical Engineering,2013,49(3):186-193.
[6] 陈逢军,尹韶辉,余剑武,等. 磁流变光整加工技术研究进展[J]. 中国机械工程,2011,22(19):2382-2392. Chen Fengjun,YIN Shaohui,YU Jianwu,et al. New progresses on magnetorheological finishing (MRF) technology[J]. China Mechanical Engineering,2011,22(19):2382-2392.
[7] 李增强,赵佩杰,宋雨轩,等. 微磨料水射流加工技术研究现状[J]. 纳米技术与精密工程,2016,14(2):134-144. LI Zengqiang,ZHAO Peijie,SONG Yuxuan,et al. Research status of micro abrasive water jet machining technology[J]. Nanotechnology and Precision Engineering,2016,14(2):134-144.
[8] 徐西鹏,刘娟,于怡青,等. 凝胶结合剂磨粒工具制备及其磨抛性能研究[J]. 机械工程学报,2013,49(19):156-162. XU Xipeng,LIU Juan,YU Yiqing,et al. Fabrication and application of gel-bonded abrasive tools for grinding and polishing tools[J]. Journal of Mechanical Engineering,2013,49(19):156-162.
[9] 袁巨龙,吴喆,吕冰海,等. 非球面超精密抛光技术研究现状[J]. 机械工程学报,2012,48(23):167-177. YUAN Julong,WU Zhe,LÜ Binghai,et al. Review on ultra-precision polishing technology of aspheric surface[J]. Journal of Mechanical Engineering,2012,48(23):167-177.
[10] CHEN Jianyi,HUANG Hui,XU Xipeng. An experimental study on the grinding of alumina with a monolayer brazed diamond wheel[J]. The International Journal of Advanced Manufacturing Technology,2009,41(2):16-23.
[11] LI L,CAI A J,GUO T N,et al. Solution of ill-posed problems for identification of the dynamic parameters of bolted joints[J]. Journal of Mechanical Science and Technology,2014,28(9):3471-3481.
[12] SOORAJ V S,RADHAKRISHNAN. Feasibility study on fine finishing of internal grooves using elastic abrasives[J]. Materials and Manufacturing Processes,2013,28(10):1110-1116.
[13] 吴晓君,孙树栋. 弹性磨具磨抛参数相关性研究[J]. 机械科学与技术,2011,30(6):865-868. WU Xiaojun,SUN Shudong. Experimental study of the correlation of flexible abrasive grinding parameters[J]. Mechanical Science and Technology for Aerospace Engineering,2011,30(6):865-868.
[14] 王成彪,刘家浚. 摩擦学材料及表面工程[M]. 北京:国防工业出版社,2012. WANG Chengbiao,LIU Jiajun. Tribological materials and surface engineering[M]. Beijing:National Defence Industry Press,2012.
[15] TEODOR M A,ARDESHIR G. Theory of elasticity for scientists and engineers[M]. New York:Springer-Verlag Inc.,2012.
[16] SEAD D,JOHN B M,SHREYES N M. A methodology for economic optimization of process parameters in centerless grinding[J]. Machining Science and Technology,201216(3):355-379.
[17] 李聪波,肖溱鸽,李丽,等. 基于田口法和响应面法的数控铣削工艺参数能效优化方法[J]. 计算机集成制造系统,2015,21(12):3182-3191. LI Congbo,XIAO Qinge,LI Li,et al. Optimization method of NC milling parameters for energy efficiency based on Taguchi and RSM[J]. Computer Integrated Manufacturing Systems,2015,21(12):3182-3191.
[18] 李辉煌. 田口方法品质设计的原理与实务[M]. 台北:高丽图书有限公司,2008. LI Huihuang. The principle and practice of the quality design of the field method[M]. Taipei:Korea Book Co.,Ltd.,2008.
