To effectively realize on-line control of the cutting deflection of thin-walled parts in side milling, a control strategy based on numerical model with finite element method (FEM) and feedrate optimization is proposed. According to the FE simulation results of cutting process, the numerical model among feedrate of machine tool, cutting force, and workpiece deflection is established, and the optimal control target of cutting force is determined. The function of force signal real-time filtering and the strategy of on-line feedrate optimization which based on Brent-Dekker are developed in the open modular architecture CNC system, and feedrate in the machining process could be adjusted to ensure optimum control of cutting force and on-line control of machining deflection through the filtered cutting force and corresponding optimization algorithm. Experimental results show that flank milling deflection of thin-walled workpiece could be maintained within a specified range in the machining process through on-line feedrate optimization, and cutting efficiency is improved.
HAN Zhenyu
,
JIN Hongyu
,
FU Yunzhong
,
FU Hongya
. FEM Numerical Model and Feedrate Optimization Based On-line Deflection Control of Thin-walled Parts in Flank Milling[J]. Journal of Mechanical Engineering, 2017
, 53(21)
: 190
-199
.
DOI: 10.3901/JME.2017.21.190
[1] 倪寿勇, 李迎. 旋风铣削加工刀齿切削力在线测量与预报[J]. 机械工程学报, 2015, 51(11):207-212. NI Shouyong, LI Ying. The measurement and prediction of cutting force for individual tooth in whirling process[J]. Journal of Mechanical Engineering, 2015, 51(11):207-212.
[2] 曹玉杰. 复杂曲面薄壁件五轴加工变形预测技术研究[D]. 大连:大连理工大学, 2014. CAO Yujie. Research on deformation prediction of five-axis machining thin-walled complex surface[D]. Dalian:Dalian University of Technology, 2014.
[3] 孙杰, 柯映林. 残余应力对航空整体结构件加工变形的影响分析[J]. 机械工程学报, 2005, 41(2):117-122. SUN Jie, KE Yinglin. Study on machining distortion of unitization airframe due to residual stress[J]. Journal of Mechanical Engineering, 2005, 41(2):117-122.
[4] RATCHEV S, LIU S, HUANG W, et al. Milling error prediction and compensation in machining of low-rigidity parts[J]. International Journal of Machine Tools and Manufacture, 2004, 44(15):1629-1641.
[5] RATCHEV S, LIU S, HUANG W, et al. An advanced FEA based force induced error compensation strategy in milling[J]. International Journal of Machine Tools and Manufacture, 2006, 46(5):542-551.
[6] 敖志强. 航空薄壁件铣削加工变形分析与试验研究[D]. 西安:西北工业大学, 2006. AO Zhiqiang. Analysis and experimental research of milling distortion of aeronautical thin-walled parts[D]. Xi'an:Northwestern Polytechnical University, 2006.
[7] 楼文明. 航空薄壁件加工变形补偿技术研究[D]. 西安:西北工业大学, 2007. LOU Wenming. Compensation technology of machining distortion of aeronautical thin-walled parts[D]. Xi'an:Northwestern Polytechnical University, 2006.
[8] 胡创国. 薄壁件精密切削变形控制与误差补偿技术研[D]. 西安:西北工业大学, 2007. HU Chuangguo. Deformation control and error compensation in precision machining of thin-walled parts[D]. Xi'an:Northwestern Polytechnical University, 2007.
[9] BUDAK E. Analytical models for high performance milling. Part I:Cutting forces, structural deformations and tolerance integrity[J]. International Journal of Machine Tools and Manufacture, 2006, 46(12-13):1478-1488.
[10] FERRY W B, ALTINTAS Y. Virtual five-axis flank milling of jet engine impellers-Part I:Mechanics of five-axis flank milling[J]. Journal of Manufacturing Science and Engineering, 2008, 130:011005, 1-11.
[11] FERRY W B, ALTINTAS Y. Virtual five-axis flank milling of jet engine impellers-Part Ⅱ:Feed rate optimization of five-axis flank milling[J]. Journal of Manufacturing Science and Engineering, 2008, 130:011013, 1-13.
[12] 陈华. 薄壁件加工过程优化仿真技术研究[D]. 南京:南京航空航天大学, 2008. CHEN Hua. Research on simulation technology in optimization machining process of thin-walled parts[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.
[13] 董龙山. 铝合金薄壁件加工变形控制技术研究[D]. 廊坊:北华航天工业学院, 2015. DONG Longshan. Machining deflection control of aluminium alloy thin-walled parts[D]. Langfang:North China Institute of Aerospace Engineering, 2015.
[14] HU Po, HAN Zhenyu, FU Hongya, et al. Architecture and implementation of closed-loop machining system based on open STEP-NC controller[J]. International Journal of Advanced Manufacturing Technology, 2016, 83(5-8):1361-1375.
[15] 李茂月,韩振宇,富宏亚,等. 基于开放式控制器的铣削颤振在线抑制[J].机械工程学报, 2012, 48(17):172-182. LI Maoyue, HAN Zhenyu, FU Fongya, et al. Online milling chatter suppression based on open architecture controller[J]. Journal of Mechanical Engineering, 2012, 48(17):172-182.
[16] 黄晓明. 铝合金航空整体结构件加工变形机理与预测研究[D]. 济南:山东大学, 2015. HUANG Xiaoming. Deformation mechanism and prediction of aluminum alloy monolithic component in the milling[D]. Jinan:Shandong University, 2015.
[17] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperature[C]//Proceedings of the Seventh International Symposium on Ballistics, 1983, 541-547.
[18] HOLMQUIST T J, TEMPLETON D W, BISHNOI K D. Constitutive modeling of aluminum nitride for large strain, high-strain rate, and high-pressure applications[J]. International Journal of Impact Engineering, 2001, 25:211-231.
