Most of engineering structures work under multiple load cases, and topology compliance minimization under multiple load cases are of important engineering value. A new compliance topology optimization method of continuum structures under multiple load cases with a volume constraint is proposed. Firstly, being referred to the bound formulation method, original multiple objective functions dealing with structural compliance under multiple load cases are transferred to multiple constraints by using a bound variable, and a novel quadratic function of the bound variable is treated as a new objective function. At the same time, being integrated with a varied volume limit scheme, a novel and equivalent approximate topology model is constructed. Then, convex and separable quadratic approximate functions for the volume and structural compliance under multiple load cases, are formed, based on the rational approximation for material properties (RAMP) and the method of moving asymptotes (MMA). The approximate optimization model is solved by adopting a smooth dual algorithm, and a new compliance topology optimization procedure, possessing convergence, is proposed. It is concluded from given examples that the proposed method is higher efficient for generating a same optimal topology, or may obtain a more optimal topology than the existed methods; and an optimal topology with clear 0/1 distribution, may robustly be obtained by the proposed method.
YU Liaohong
,
RONG Jianhua
,
ZHAO Zhijun
,
CHEN Yixiong
,
LI Fangyi
. A New Solving Method of the Compliance Topology Optimization Problem of Continuum Structures under Multiple Load Cases[J]. Journal of Mechanical Engineering, 2018
, 54(5)
: 210
-219
.
DOI: 10.3901/JME.2018.05.210
[1] BENDSØE M P,KIKUCHI N. Generating optimal topologies in structural design using a homogenization method[J]. Computer Methods in Applied Mechanics and Engineering,1988,71(2):197-224.
[2] JUSTESEN P D. Multi-objective optimization using evolutionary algorithms[D]. Denmark:University of Aarhus, Department of Computer Science,2009.
[3] MARLER R T,ARORA J S. Survey of multi-objective optimization methods for engineering[J]. Structural and Multidisciplinary Optimization,2004, 26(6):369-395.
[4] MUNK D J,KIPOUROS T,VIO G A,et al. Multiobjective and multi-physics topology optimization using an updated smart normal constraint bi-directional evolutionary structural optimization method[J]. Structural and Multidisciplinary Optimization,2017:1-24.
[5] MARLER R T,ARORA J S. The weighted sum method for multi-objective optimization:New insights[J]. Structural and Multidisciplinary Optimization,2010,41(6):853-862.
[6] STANIMIROVIC I P,ZLATANOVIC M L,PETKOVIC M D. On the linear weighted sum method for multi-objective optimization[J]. Facta Acta Universitatis,2011,26(4):49-63.
[7] JUBRIL A M. A nonlinear weights selection in weighted sum for convex multiobjective optimization[J]. Facta Universitatis,2012,27(3):357-372.
[8] HANCOCK B J,MATTSON C A. The smart normal constraints method for directly generating a smart Pareto set[J]. Struct. Multidiscip. Optim.,2013,48(4):763-775.
[9] 罗震,陈立平,张云清,等. 多工况下连续体结构的多刚度拓扑优化设计和二重敏度过滤技术[J]. 固体力学学报,2005,26(1):29-36. LUO Zhen,CHEN Liping,ZHANG Yunqing, et al. Multi-stiffness optimization for continuum structures with multiple loading cases and a duplicate sensitivity filtering method[J]. Acta Mechanica Solida Sinica, 2005,26(1):29-36.
[10] 兰凤崇,赖番结,陈吉清,等. 考虑动态特性的多工况车身结构拓扑优化研究[J]. 机械工程学报,2014,50(20):122-128. LAN Fengchong,LAI Fanjie,CHEN Jiqing,et al. Multi-case topology optimization of body structure considering dynamic characteristic[J]. Journal of Mechanical Engineering,2014,50(20):122-128.
[11] 张志飞,陈仁,徐中明,等. 面向多目标的汽车悬架控制臂拓扑优化研究[J]. 机械工程学报,2017,53(4):114-121. ZHANG Zhifei,CHEN Ren,XU Zhongming,et al. Research on multi-objective topology optimization of vehicle suspension control arm[J]. Journal of Mechanical Engineering,2017,53(4):114-121.
[12] KUNAKOTE T,BUREERAT S. Multi-objective topology optimization using evolutionary algorithms[J]. Engineering Optimization,2011, 43(5):541-557.
[13] KONAK A,COIT D W,SMITH A E. Multi-objective optimization using genetic algorithms:A tutorial[J]. Reliability Engineering & System Safety,2006,91(9):992-1007.
[14] MADEIRA J F A,RODRIGUES H,PINA H. Multi-objective optimization of structures topology by genetic algorithms[J]. Advances in Engineering Software,2005,36(1):21-28.
[15] CARDILLO A,CASCINI G,FRILLICI F S,et al. Multi-objective topology optimization through GA-based hybridization of partial solutions[J]. Engineering with Computers,2013,29(3):287-306.
[16] INZENHOFER A,HAIKONEN J,HUPFER A. Multiobjective topology optimization with the sko-method[J]. Structural and Multidisciplinary Optimization,2017:1-16.
[17] BENDSØE M P,OLHOFF N,TAYLOR J E. A variational formulation for multicriteria structural optimization[J]. Journal of Structural Mechanics,1983,11(4):523-544.
[18] JAMES K A,HANSEN J S,MARTINS J R R A. Structural topology optimization for multiple load cases using a dynamic aggregation technique[J]. Engineering Optimization,2009,41(12):1103-1118.
[19] 石军,荣见华,俞燎宏,等. 考虑载荷随机性的可行域调整的结构拓扑优化设计[J]. 机械工程学报,2017,53(23):116-128. SHI Jun,RONG Jianhua,YU Liaohong et al. Feasible domain adjustment topology optimization esigns of structuresunder stochastic loads[J]. Journal of Mechanical Engineering,2017,53(23):116-128.
[20] RONG J H,YU L H,RONG X P,et al. A novel displacement constrained optimization approach for black and white structural topology designs under multiple load cases[J]. Struct. Multidisc. Optim.,2017,56(4):865-884.
[21] STOLPE M,SVANBERG K. An alternative interpolation scheme for minimum compliance topology optimization[J]. Structural and Multidisciplinary Optimization,2001,22(2):116-124.
[22] SVANBERG K. The method of moving asymptotes-a new method for structural optimization[J]. International Journal for Numerical Methods in Engineering,1987,24(2):359-373.
[23] SVANBERG K. A class of globally convergent optimization methods based on conservative convex separable approximations[J]. SIAM Journal on Optimization,2002,12(2):555-573.
[24] HUANG X,XIE Y M. Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method[J]. Finite Elements in Analysis and Design,2007,43(14):1039-1049.
[25] SIGMUND O. A 99 line topology optimization code written in Matlab[J] Struct. Multidiscip. Optim.,2001,21(2):120-127.
[26] GROENWOLD A A,ETMAN L F P. A simple heuristic for gray-scale suppression in optimality criterion-based topology optimization[J]. Struct. Multidisc. Optim.,2009,39(2):217-225.
[27] RONG J H,LIU X H,YI J J,et al. An efficient structural topological optimization method for continuum structures with multiple displacement constraints[J]. Finite Elements in Analysis and Design,2011,47(8):913-921.
[28] RONG J H,XIAO T T,YU L H,et al. Continuum structural topological optimization with stress constraints based on an active constrainttechnique[J]. Int. J. Numer. Meth. Eng.,2016,108(4):326-360.
[29] BERTSEKAS D P. Nonlinear programming[M]. Belmont:Athena Scientific,2003.
