To the influence of dynamics modeling of machine tool joints and identification method on the coupling relationship between substructure and internal vibration on external response is not adequately considered, the dynamics theory model of joints of machine tool is completely established by adopting the frequency response function matrix. The identification equation is derived based on mechanical equilibrium and displacement compatibility condition, and a new dynamics identification method is proposed. In the process of identification blending in the coupling relationship between substructures and rendering the frequency response function (FRF) difficult to measure as intermediate variable offset, the method avoid equation error using unpredictable response or estimation. On this basis, the identification equation is extended to the whole measurement range, and then the contradiction equation including identification is constructed. The equivalent dynamic stiffness is determined by the least square method and the finite element model of the structure is established. In order to verify the feasibility and correctness of the proposed method, field tests are conducted based on the LMS test platform and acquire good results. Compared with other modeling method such as reducing dimension and ignoring the internal excitation, the results indicate that the proposed method has better prediction.
DONG Guanhua
,
YIN Qin
,
YIN Guofu
,
WANG Liang
,
TAN Feng
. Research on Dynamics Modeling and Identification of Machine Tool Joints[J]. Journal of Mechanical Engineering, 2016
, 52(5)
: 162
-168
.
DOI: 10.3901/JME.2016.05.162
[1] 杨橚,唐恒龄,廖伯瑜. 机床动力学[M]. 北京：机械工业出版社,1983.
YANG Su,TANG Hengling,LIAO Boyu. Machine tool dynamics [M]. Beijing：China Machine Press,1983.
[2] BURDEKIN M,BAEK N A. Analysis of the local deformation in machine joints [J]. Mech. Eng. Sci.,1979,34(3)：15-17.
[3] VAFAEI S,RAHNEJAT H,AINI R. Vibration monitoring of high speed spindles using spectral analysis techniques [J]. Machine Tools&Manufacture,2002,42：1223-1234.
[4] YOSHIMURA M. Computer aided design of machine structures with respect to static and dynamic characteristics by synthesis of dynamic rigidity program system：Study for analysis of structural dynamics of machine tools[J]. The Japan Society for Precision Engineering,1975(5)：1060-1065.
[5] 黄玉美,付卫平. 结合面法向动态特性参数研究[J]. 机械工程学报,1993,29(3)：74-78.
HUANG Yumei,FU Weiping. Research on the dynamic normal characteristic parameters of joint surface[J]. Chinese Journal of Mechanical Engineering,1993,29(3)：74-78.
[6] 张学良,王南山,温淑花,等. 机械结合面切向接触阻尼能量耗散弹塑性分形模型[J]. 机械工程学报,2013,49(12)：43-49.
ZHANG Xueliang,WANG Nanshan,WEN Shuhua,et al. Elastoplastic fractal model for tangential contact damping energy dissipation of machine joint interfaces[J]. Journal of Mechanical Engineering,2013,49(12)：43-49.
[7] LIN Y,CHEN W. A method of identifying interface characteristic for machine tools design[J]. Journal of Sound and Vibration,2002,255(3)：481-487.
[8] GUO Q,ZHANG L. Identification of the mechanical joint parameters with model uncertainty[J]. Chinese Journal of Aeronautics,2005,18(1)：47-52.
[9] MOTTERSHEAD J E,STANWAY R. Identification of structural vibration parameters by using a frequency domain filter[J]. Journal of Sound and Vibration,1986,109(3)：495-506.
[10] TSAI J S,CHOU Y F. The identification of dynamic characteristics of a single bolt joint[J]. Journal of Sound and Vibration,1988,125(3)：487-502.
[11] REN Y,BEARDS C F. Identification of joint properties of a structure using FRF data[J]. Journal of Sound and Vibration,1995,186(4)：567-587.
[12] WANG J H,CHUANG S C. Reducing errors in the identification of structural joint parameters using error functions[J]. Journal of Sound and Vibration,2004,273(1)：295-316.
[13] ČELIČ D,BOLTEŽAR M. Identification of the dynamic properties of joints using frequency -response functions [J]. Journal of Sound and Vibration,2008,317：158-174.
[14] ZHOU N,LIU K. A tunable high-static-low-dynamic stiffness vibration isolator[J]. Journal of Sound and Vibration,2010,329(9)：1254-1273.
[15] ČELIČ D,BOLTEŽAR M. The influence of the coordinate reduction on the identification of the joint dynamic properties[J]. Mechanical Systems and Signal Processing,2009,23：1260-1271.
[16] 董冠华,殷国富,胡晓兵,等. 基于频响函数的螺栓结合部法向刚度辨识与试验研究[J]. 四川大学学报,2014,46(4)：183-188.
DONG Guanhua,YIN Guofu,HU Xiaobing,et al. Identification and experiment research of bolted joints normal stiffness based on FRF[J]. Journal of Sichuan University,2014,46(4)：183-188.
[17] 李玲,蔡安江,蔡力钢,等. 栓接结合部动态特性辨识方法[J]. 机械工程学报,2013,49(7)：168-175.
LI Ling,CAI Anjiang,CAI Ligang,et al. Identification method for dynamic properties of bolted joints[J]. Journal of Mechanical Engineering,2013,49(7)：168-175.
