Integrally geared compressor is characterized by compact and high efficiency machines, which widely used in modern process industry. The critical load failure phenomenon was found in an integrally geared compressor monitoring process. The relationship between support stiffness and critical speed is established by formula deduction, and then integrally geared compressor critical load failure mechanism is revealed. To analyse the critical load failure mechanism, a five-axial integrally geared compressor is used as the research object. The gear transmission system model, support bearing system model and rotor system model of the compressor is built, and the impact of gear transmission system, support bearing system and rotor system caused by adjusted load are analyzed and compared. The relationship between load and critical speed is obtained by dynamics model. The results show some critical speed coincides with the rated speed will result in the critical load failure phenomenon when adjusting the compressor load. Using polynomial fitting, different compressor load and critical speed function is gained, and the compressor load is calculated when critical load failure occurs.
ZHANG Ming
,
JIANG Zhinong
,
ZHU Jun
,
GAO Jinji
. Critical Load Failure Phenomenon and Mechanism of Integrally Geared Compressor[J]. Journal of Mechanical Engineering, 2017
, 53(23)
: 20
-25
.
DOI: 10.3901/JME.2017.23.020
[1] 金颖,温广瑞,郎博,等. 某多轴压缩机的一起振动故障分析与诊断[J]. 振动与冲击, 2010, 29(增刊):303-305. JIN Ying, WEN Guangrui, LANG Bo, et al. Vibration diagnosis analysis of some multi-rotor compressor[J]. Joournal of Vibration and Shock, 2010, 29(Suppl.):303-305.
[2] 李元生,敖良波,李磊,等. 滑动轴承动力特性系数动态分析方法[J]. 机械工程学报, 2010, 46(21):48-53. LI Yuansheng, AO Langbo, LI Lei, et al. Dynamic analysis method of dynamic character coefficient of hydrodynamic journal bearing[J]. Journal of Mechanical Engineering, 2010, 46(21):48-53.
[3] 黄龙. 高速离心式压缩机转子动力学有限元分析[D]. 武汉:华中科技大学, 2012. HUANG Long. Finite element analysis for high-speed centrifugal compressor rotor dynamics[D]. Wuhan:Huazhong University of Science and Technology, 2012.
[4] 翁立伟,刁全,杨永江. 整体齿轮组装式离心压缩机设计[J]. 风机技术, 2009(4):34-36. WEN Liwei, DIAO Quan, YANG Yongjiang. Design of assembled centrifugal compressor with integral gear[J]. Wind Turbine Technology, 2009(4):34-36.
[5] 成正朝, 牛大勇. 组装式离心压缩机的特点及发展趋势[J]. 风机技术, 2003(4):3-5. CHENG Zhengchao, NIU Dayong. Characteristics and trend of development for packaged centrifugal compressor[J]. Wind Turbine Technology, 2003(4):3-5.
[6] 王广兰, 马诚. 多轴组装式与传统单轴离心压缩机的比较[J]. 风机技术, 1998, 3:14-17. WANG Guanglan, MA Cheng. Comparison of multi-rotor assembled with the traditional single-rotor centrifugal compressor[J]. Wind Turbine Technology, 1998, 3:14-17.
[7] LEE A S, HA J W, CHOI D H. Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system[J]. Journal of Sound and Vibration, 2003, 263(4):725-742.
[8] 费钟秀. 复杂转子耦合系统有限元建模及其动力特性研究[D]. 浙江大学, 2013. FEI Zhongxiu. Research on finite element modeling and dynamic behaviors of complex multi-rotor coupled Systems[D]. Zhejiang University, 2013.
[9] 马辉,逄旭,宋溶泽,等. 考虑齿顶修缘的齿轮-转子系统振动响应分析[J]. 机械工程学报, 2014, 50(7):39-45. MA Hui, PANG Xu, SONG Rongze, et al. Vibration response analysis of a geared rotor system considering the tip relief[J]. Journal of Mechanical Engineering, 2014, 50(7):39-45.
[10] 窦唯,张楠,刘占生. 高速齿轮转子系统弯扭耦合振动研究[J]. 振动工程学报, 2011, 24(4):385-393. DOU Wei, ZHANG Lan, LIU Zhansheng. Study on the coupling flexural torsional vibration of rotor system of the high speed gear[J]. Journal of Mechanical Engineering, 2011, 24(4):385-393.
[11] CHOI S T, MAU S Y. Dynamic analysis of geared rotor-bearing systems by the transfer matrix method[J]. Journal of Mechanical Design, 2001, 123(4):562-568.
[12] HAMOUDA R M, BADR M A, ALOLAH A I. Effect of torsional dynamics on salient pole synchronous motor-driven compressors[J]. Energy Conversion, IEEE Transactions on, 1996, 11(3):531-538.
[13] 余光伟. 多平行轴齿轮——轴承——转子系统耦合振动的有限元分析[M]. 上海:上海大学出版社, 1999. YU Guangwei. Analysis of couplin vibration of multi-stage gear-bearing-rotor systems with finite element method[M]. Shanghai:Shanghai University, 1999.
[14] 高金吉. 高速涡轮机械振动故障机理及诊断方法的研究[D]. 北京:清华大学, 1993. GAO Jinji. Study on high speed turbine mechanical vibration fault diagnosis method[D]. Beijing:Tsinghua University, 1993.
[15] LUND J W. Sensitivity of the critical speeds of a rotor to changes in the design[J]. Journal of Mechanical Design, 1980, 102(1):115-121.
