Prediction Model and Verification of Wheel Wear in High-speed Trains

  • HAN Peng ,
  • ZHANG Weihua
Expand
  • State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031

Received date: 2015-08-06

  Revised date: 2015-12-14

  Online published: 2016-01-15

Abstract

Wheel-tracking measurement is carried on to survey the wear law of wheel profiles of the high-speed trains in China. Numerical prediction function of wheel wear model is proposed according to a large number of these measured data in this article. Abrasion losses are fitting to get the polynomial fitting function on different locations of wheel profiles at fixed operation mileage. And further, the second fitting is conducted to predict the coefficients of the above polynomial function. The binary numerical prediction model is raised to predict the abrasion losses as a function of wear location and operation mileage. The applicable and the accuracy of the prediction model are proved by the comparison of the tested wear profile curves and the predicted ones. Vehicle system dynamics models are also established to compare wheel/rail contact points, equivalent conicity, wheel/rail contact forces and the safety of vehicle which are calculated with the tested and the predicted wear profiles respectively. The results show that the predicted profiles calculated by the proposed numerical prediction function have a great agreement with tested profiles both in the curve shapes and vehicle system dynamic performances.

Cite this article

HAN Peng , ZHANG Weihua . Prediction Model and Verification of Wheel Wear in High-speed Trains[J]. Journal of Mechanical Engineering, 2016 , 52(2) : 144 -149 . DOI: 10.3901/JME.2016.02.144

References

[1] 崔大宾,梁树林,宋春元,等. 高速车轮非圆化现象及其对轮轨行为的影响[J]. 机械工程学报,2013,49(18):8-16. CUI Dabin,LIANG Shulin,SONG Chunyuan,et al. Out of round high-speed wheel and its influence on wheel/rail behavior[J]. Journal of Mechanical Engineering,2013,49(18):8-16.
 [2] 马卫华,邹瑞明,罗世辉. 轮径差对机车惰行和电制动轮轨作用的影响[J]. 机械工程学报,2015,51(14):115-121. MA Weihua,ZOU Ruiming,LUO Shihui. Influence of wheel diameter difference on wheel/Rail interaction of locomotive under coasting and electric braking conditions[J]. Journal of Mechanical Engineering,2015,51(14):115-121.
 [3] POMBO J,AMBROSIO J,PEREIRA M,et al. A railway wheel wear prediction tool based on a multibody software[J]. Journal of Theoretical and Applied Mechanics,2010,48:751-770.
 [4] IGNESTI M,INNCENTI A,MARINI L,et al. Development of a model for the simultaneous analysis of wheel and rail wear in railway systems[J]. Multibody System Dynamics,2014,31(2):191-240.
 [5] IGNESTI M,MARINI L,MELI E,et al. Development of a model for the prediction of wheel and rail wear in the railway field[J]. Journal of Computational and Nonlinear Dynamics,2012,7(4):614-620.
 [6] ENBLOM R. On simulation of uniform wear and profile evolution in the wheel-rail contact[D]. Stockholm:Royal Institute of Technology,2006.
 [7] ENBLOM R,BERG M. Simulation of railway wheel profile development due to wear-influence of disc braking and contact environment[J]. Wear,2005,258(7):1055-1063.
 [8] JENDEL T. Prediction of wheel profile wear comparisons with field measurements[J]. Wear,2002,253(1):89-99.
 [9] HAN Peng,ZHANG Weihua,LI Yan. Wear charac teristics and prediction of wheel profiles in high-speed trains[J]. Journal of Central South University,2015(22):3232-3238.
[10]  TASSINI N,QUOST X,LEWIS R,et al. A numerical model of twin disc test arrangement for the evaluation of railway wheel wear prediction methods[J]. Wear,2010,268(5):660-667.
[11] BRAGHIN F,LEWIS R,DWYER-JOYCE R S,et al. A mathematical model to predict railway wheel profile evolution due to wear[J]. Wear,2006,261(11):1253-1264.
[12] ARIZON J,VERLINDEN O,DEHOMBREUX P. Prediction of wheel wear in urban railway transport:Comparison of existing models[J]. Vehicle System Dynamics,2007,45(9):849-866.
[13]  ASADI A,BROWN M. Rail vehicle wheel wear prediction:A comparison between analytical and experimental approaches[J]. Vehicle System Dynamics,2008,46(6):541-549.
[14]  HAN Jian,WANG Ruiqian,WANG Di. Effect of wheel load on wheel vibration and sound radiation[J]. Chinese Journal of Mechanical Engineering,2015,28(1):46-54.
[15] HAN Peng,ZHANG Weihua. A new binary wheel wear prediction model based on statistical method and the demonstration[J]. Wear,2015,324(1):90-99.
[16] 韩鹏,张卫华,李艳,等. 轮对磨耗与轮径差对高速列车动力学性能的影响[J]. 交通运输工程学报,2013,13(6):48-53. HAN Peng,ZHANG Weihua,LI Yan,et al. Influence of wheeset wear and wheel radius difference on dynamics performances of high-speed train[J]. Journal of Traffic and Transportation Engineering,2013,13(6):48-53.
Outlines

/