Based on thermal-elastic-plastic theory, a three dimensional numerical model of residual stress in laser+metal inert gas (MIG) hybrid welding of aluminum alloy is developed. The laser and arc heat inputs are modeled as the double ellipsoid heat source and the cone heat source with exponentially enhanced power density along the central axis, respectively. Using the built model, the residual stress in hybrid butt welding of 12 mm thick aluminum alloy is calculated through ANSYS finite element software and its distribution feature is analyzed, which is also compared with that of MIG welding. The calculated results of temperature and residual stress fields are compared with the experimental data to validate the accuracy of the model. Results show that, in and near weld zone, both the longitudinal tensile stress and Von-Mises equivalent stress are higher, their peak values being lower than the yielding stress of base metal. In addition, the stress in laser action zone is larger than that in arc action domain. A transversal tensile stress is generated at weld toe but its peak value is small. Compared with those of multi-pass and multi-layer MIG welding, the high stress is narrower. The peak stress at top surface of workpiece in hybrid welding is lower than that in MIG welding. But, at the workpiece bottom surface, the former is greater than the latter.
XU Guoxiang
,
GUO Qinghu
,
HU Qingxian
,
ZHU Jie
,
LIU Peng
,
PAN Haichao
. Numerical Analysis of Welding Residual Stress in Laser+MIG Hybrid Butt Welding of Medium-thick Aluminum Alloy[J]. Journal of Mechanical Engineering, 2018
, 54(2)
: 77
-83
.
DOI: 10.3901/JME.2018.02.077
[1] 周万盛,姚君山. 铝及铝合金的焊接[M]. 北京:机械工业出版社,2006 ZHOU Wansheng,YAO Junshan. Welding of aluminum and its alloys[M]. Beijing:China Machine Press,2006.
[2] STAUFER H. Laser hybrid welding in the automotive industry[J]. Welding Journal,2007,86(10):36-40.
[3] BAGGER C,OLSEN F O. Review of laser hybrid welding[J]. Journal of Laser Application,2005,17(1):2-14.
[4] DEFALCO J. Practical application for hybrid laser welding[J]. Welding Journal,2007,86(10):47-50.
[5] KATAYAMA S,UCHIUMI S,MIZUTANI M,et al. Penetration and porosity prevention mechanism in YAG laser-MIG hybrid welding[J]. Welding International,2007,21,25-31.
[6] 张维明,武传松,秦国梁,等. 铝合金激光+脉冲GMAW焊焊缝成形的数值模拟[J]. 机械工程学报,2013,49(10):110-115. ZHANG Weiming,WU Chuansong,QIN Guoliang,et al. Prediction of weld shape and size for laser+GMAW-P hybrid welding of aluminum alloys[J]. Journal of Mechanical Engineering,2013,49(10):110-115.
[7] ZHANG C,GAO M,WANG D Z,et al. Relationship between pool characteristic and weld pool porosity in laser arc hybrid welding of AA6082 aluminum alloy[J]. Journal of Materials Processing Technology,2017,240:217-222.
[8] ASCARI A,FORTUNATO A,ORZI L,et al. The influence of process parameters on porosity formation in hybrid LASER-GMA welding of AA6082 aluminum alloy[J]. Optics & Technology,2012,44:1485-1490.
[9] ZHANG D Q,JIN X,GAO L X,et al. Effect of laser-arc hybrid welding on fracture and corrosion behavior of AA6061-T6 alloy[J]. Materials Science and Engineering A,2011,528:2748-2754.
[10] 胥国祥,武传松,秦国梁,等. 铝合金T型接头激光+ GMAW复合热源焊温度场的有限元分析[J]. 金属学报,2012,48(9):1033-1041. XU Guoxiang,WU Chuansong,QIN Guoliang,et al. Finite element analysis of temperature field in laser+GMAW hybrid welding for T-joint of aluminum alloy[J]. Acta Metallurgica Sinica,2012,48(9):1033-1041.
[11] MAZAR ATABAKI M,NIKODINOVSKI M,CHENIER P,et al. Experimental and numerical investigation of hybrid laser arc welding of aluminum alloy in the thick T-joint configuration[J]. Optics & Laser Technology,2014,59:68-92.
[12] XU G X,WU C S,MA X Z,et al. Numerical analysis of welding residual stress and distortion in laser+GMAW hybrid welding of aluminum alloy T-joint[J]. Acta Metallurgica Sinica,2013,26(3):353-360.
[13] KONG F R,MA J J,KOVACEVIC R. Numerical and experimental study of thermally induced residual stress in the hybrid laser-GMA welding process[J]. Journal of Materials Processing Technology,2011,211:1102-1111.
[14] ZHANG T,WU C S,QIN G L,et al. Thermo mechanical analysis for Laser+GMAW-P hybrid welding process[J]. Computational Materials Science,2010,47:848-856.
[15] JIN X Z,BERGER P,GRAF T. Multiple reflections and Fresnel absorption in an actual 3D keyhole during deep penetration laser welding[J]. Journal of Physics D:Applied Physics,2006,39:4073-4712.
[16] 刘川,张建勋,牛靖. 焊接动态约束变形三维多体耦合数值模拟[J]. 机械工程学报,2010,46(6):83-86. LIU Chuan,ZHANG Jianxun,NIU Jing. 3D multi-body coupling numerical simulation of welding dynamic distortion with restraints[J]. Journal of Mechanical Engineering,2010,46(6):83-86.
[17] 段永刚. 基于ANSYS软件的焊接应力变形工程预测[D]. 上海:上海交通大学,2003. DUAN Yonggang. Prediction of welding FEM deformation and stress distribution based on ANSYS[D]. Shanghai:Shanghai Jiao Tong University,2003.
