In order to investigate the coupled vibration response and dynamic performance optimization method of multi-stage planetary gear reducer under complex excitation, a certain type of offshore platform lifting gearbox is studied, and a dynamic lumped parameter model for four-stage planetary gear coupled system with consideration of time-varying mesh stiffness, transmission error, mesh damping, backlash, friction moment, combined stiffness and damp is established. The dynamic equation under rated condition is solved with Runge-Kutta method, and the calculated vibration response has a good agreement with experimental value. On this basis, a dynamic optimization method of multi-stage planetary coupled system is developed by harmonic balance method. A multi-objective mixed discrete optimization model is established by taking structural parameters of housing and gear set as design variables, taking total transmission ratio, practical center distance, gear strength, etc. as constraint conditions, and taking minimizing RMS value of vibration acceleration and total mass as optimization object. The optimal design variable is solved through optimization program based on the branch-bound algorithm. It shows that total mass of the optimized gear reducer decreases by 8.2%, vibration acceleration of gear set decreases by 33.4%, vibration acceleration of housing decreases by 70.5%, which indicates the optimization is effective.
LIN Tengjiao, CAO Hong, TAN Ziran, HE Zeyin, LÜ Hesheng
. Dynamic Performance Optimization of Coupled System for Four-stage Planetary Gear Reducer[J]. Journal of Mechanical Engineering, 2018
, 54(11)
: 161
-171
.
DOI: 10.3901/JME.2018.11.161
[1] 卜忠红,刘更,吴立言. 行星齿轮传动动力学研究进展[J]. 振动与冲击, 2010, 29(9):161-166. BU Zhonghong, LIU Geng, WU Liyan. Research advances in planetary gear trains dynamics[J]. Journal of Vibration and Shock, 2010, 29(9):161-166.
[2] KAHRAMAN A. Planetary gear train dynamics[J]. Journal of Mechanical Design, 1994, 116(3):713-720.
[3] VELEX P, FLAMAND L. Dynamic response of planetary trains to mesh parametric excitations[J]. Journal of Mechanical Design, 1996, 118(1):7-14.
[4] LIN Jian, PARKER R G. Analytical characterization of the unique properties of planetary gear free vibration[J]. Journal of Vibration and Acoustics, 1999, 121(3):316-321.
[5] PARKER R G, AGASHE V, VIJAYAKAR S M. Dynamic response of a planetary gear system using a finite element/contact mechanics model[J]. Journal of Mechanical Design, 2000, 122(3):304-310.
[6] 孙涛,沈允文,孙智民,等. 行星齿轮传动非线性动力学方程求解与动态特性分析[J]. 机械工程学报, 2002, 38(3):11-15. SUN Tao, SHEN Yunwen, SUN Zhimin, et al. Study on nonlinear dynamic behavior of planetary gear train solution and dynamic behavior analysis[J]. Chinese Journal of Mechanical Engineering, 2002, 38(3):11-15.
[7] 宋轶民,许伟东,张策,等. 2K-H行星传动的修正扭转模型建立与固有特性分析[J]. 机械工程学报, 2006, 42(5):16-21. SONG Yimin, XU Weidong, ZHANG Ce, et al. Modified torsional model development and natural characteristics analysis of 2K-H epicyclic gearing[J]. Chinese Journal of Mechanical Engineering, 2006, 42(5):16-21.
[8] 张俊,宋轶民,张策,等. NGW型直齿行星传动自由振动分析[J]. 天津大学学报, 2010, 43(1):90-94. ZHANG Jun, SONG Yimin, ZHANG Ce, et al. Analysis of free vibration of NGW spur planetary gear set[J]. Journal of Tianjin University, 2010, 43(1):90-94.
[9] WANG Shiyu, HUO Mina, ZHANG Ce, et al. Effect of mesh phase on wave vibration of spur planetary ring gear[J]. European Journal of Mechanics-A/Solids, 2011, 30(6):820-827.
[10] 肖正明,秦大同,尹志宏. 多级行星齿轮系统耦合动力学分析与试验研究[J]. 机械工程学报, 2012, 48(23):51-58. XIAO Zhengming, QIN Datong, YIN Zhihong. Multi-stage planetary gears dynamic coupling analysis and experimental investigation[J]. Journal of Mechanical Engineering, 2012, 48(23):51-58.
[11] 贺朝霞,常乐浩,刘岚. 耦合箱体振动的行星齿轮传动系统动态响应分析[J]. 华南理工大学学报,2015, 43(9):128-134, 148. HE Zhaoxia, CHANG Lehao, LIU Lan. Dynamic response analysis of planetary gear transmission system coupled with gearbox vibrations[J]. Journal of South China University of Technology, 2015, 43(9):128-134, 148.
[12] 秦大同, 赵勇. 盾构机刀盘驱动多级行星齿轮传动系统的多目标优化[J]. 中国机械工程, 2012, 23(1):12-17. QIN Datong, ZHAO Yong. Multi-objective optimization of multi-stage planetary gear train used in shield machine cutter driver[J]. China Mechanical Engineering, 2012, 23(1):12-17.
[13] 林腾蛟,李应超,杨妍妮. 准双曲面齿轮箱响应分析及动力优化[J]. 振动与冲击, 2011, 30(3):145-149, 170. LIN Tengjiao, LI Yingchao, YANG Yanni. Response analysis and dynamic optimization of hypoid gearbox[J]. Journal of Vibration and Shock, 2011, 30(3):145-149, 170.
[14] 何泽银. 齿轮系统传动误差耦合分析与振动噪声优化研究[D]. 重庆:重庆大学, 2015. HE Zeyin. Transmission error analysis and optimization research on vibration and noise of gear system[D]. Chongqing:Chongqing University, 2015.
[15] 朱恩涌,巫世晶,王晓笋,等. 含摩擦力的行星齿轮传动系统非线性动力学模型[J]. 振动与冲击,2010,29(8):217-220, 236. ZHU Enyong, WU Shijing, WANG Xiaosun, et al. Study on nonlinear dynamic model of planetary gear train sets with friction force[J]. Journal of Vibration and Shock, 2010, 29(8):217-220, 236.
[16] 黄冠华,王兴宇,梅桂明,等. 内外激励下高速列车齿轮箱箱体动态响应分析[J]. 机械工程学报, 2015, 51(12):95-100. HUANG Guanhua, WANG Xingyu, MEI Guiming, et al. Dynamic response analysis of gearbox housing system subjected to internal and external excitation in high-speed train[J]. Journal of Mechanical Engineering, 2015, 51(12):95-100.
[17] LIN H H, HUSTON R L, COY J J. On dynamic loads in parallel shaft transmissions:Part I-modelling and analysis[J]. Journal of Mechanisms, Transmissions, and Automation in Design, 1988, 110(2):221-225.
[18] 李军,徐玖平. 运筹学:非线性系统优化[M]. 北京:科学出版社, 2003. LI Jun, XU Jiuping. Operations research:Nonlinear system optimization[M]. Beijing:Science Press, 2003.
