In order to achieve high efficiency, high quality and low damage machining of hard brittle materials, additional ultrasonic vibrations in the axial and radial directions of workpiece/grinding wheel are applied simultaneously while grinding. The unique property of this technique is the cutting trajectory of abrasive grain is a spiral line. Accordingly, this technique is named as ultrasonic vibration spiral grinding method. Under the interactions of processing parameters and two-dimensional ultrasonic vibrations, the material removal mechanism becomes more complex, as well as the formation process of surface microtopography. Thus, a numerical simulation method of surface formation in ultrasonic vibration spiral grinding is proposed. Based on the geometric mapping relationship between grains and workpiece in ultrasonic vibration spiral grinding, the spiral cutting and motion model of grains is established. The surface formation model of ultrasonic vibration spiral grinding is provided afterward. Consequently, the three-dimensional surface microtopography of conventional grinding and ultrasonic vibration spiral grinding are simulated respectively. Then, the influence laws of ultrasonic vibrations on the surface formation process are comparatively analyzed. At last, the simulated surfaces are compared with the experimental grinding surfaces and their microstructures are found to be in the same manner, which proves the validity of this simulation method.
WANG Qiuyan
,
LIANG Zhiqiang
,
WANG Xibin
,
ZHOU Tianfeng
,
ZHAO Wenxiang
,
WU Yongbo
,
JIAO Li
. Research on Modeling and Simulation of Surface Microtopography in Ultrasonic Vibration Spiral Grinding[J]. Journal of Mechanical Engineering, 2017
, 53(19)
: 83
-89
.
DOI: 10.3901/JME.2017.19.083
[1] 梁志强,王西彬,吴勇波,等. 单晶硅二维超声振动辅助磨削技术的实现[J]. 机械工程学报,2010,46(13):192-198. LIANG Zhiqiang,WANG Xibin,WU Yongbo,et al. Development of a two-dimensional ultrasonic vibration assisted grinding technique of monocrystal silicon[J]. Journal of Mechanical Engineering,2010,46(13):192-198.
[2] LIANG Z Q,WU Y B,WANG X B,et al. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining[J]. International Journal of Machine Tools and Manufacture,2010,50(8):728-736.
[3] LIANG Z Q,WANG X B,WU Y B,et al. Experimental study on brittle-ductile transition in elliptical ultrasonic assisted grinding of monocrystal sapphire using single diamond abrasive grain[J]. International Journal of Machine Tools and Manufacture,2013,71:41-51.
[4] CHEN X,ROWE W B. Analysis and simulation of the grinding process. Part Ⅱ:Mechanics of grinding[J]. International Journal of Machine Tools and Manufacture,1996,36(8):883-896.
[5] ZHOU X,XI F. Modeling and predicting surface roughness of the grinding process[J]. International Journal of Machine Tools and Manufacture,2002,42(8):967-977.
[6] NGUYEN T A,BUTLER D L. Simulation of precision grinding process,part 1:Generation of the grinding wheel surface[J]. International Journal of Machine Tools Manufacturing,2005,45(8):1321-1328.
[7] 陈东祥,田延岭. 超精密磨削加工表面形貌建模与仿真方法[J]. 机械工程学报,2010,46(13):186-191. CHEN Dongxiang,TIAN Yanling. Modeling and simulation methodology of the machined surface in ultra-precision grinding[J]. Journal of Mechanical Engineering,2010,46(13):186-191.
[8] 巩亚东,刘月明,仇健,等. 点磨削工件微观形貌仿真与试验研究[J]. 机械工程学报,2012,48(17):165-171. GONG Yadong,LIU Yueming,QIU Jian,et al. Research on simulation and experiment for workpiece micro-surface in point grinding[J]. Journal of Mechanical Engineering,2012,48(17):165-171.
[9] 吕长飞,李郝林. 外圆磨削砂轮形貌仿真与工件表面粗糙度预测[J]. 中国机械工程,2012,23(6):666-670. LÜ Changfei,LI Haolin. Simulation of wheel topography and forecasting of roughness in cylindrical grinding[J]. Chinese Journal of Mechanical Engineering,2012,23(6):666-670.
[10] DOMAN D A,WARKENTIN A,BAUER R. A survey of recent grinding wheel topography models[J]. International Journal of Machine Tool & Manufacture,2006,46(3-4):343.-352.
[11] AGARWAL X,RAO P V. Modeling and prediction of surface roughness in ceramic grinding[J]. International Journal of Machine Tool & Manufacture,2010,50(12):1065-1076.
