Deep-hole machining is widely applied in the aviation engine manufacture. However, the machining quality is difficult to be guaranteed due to its weak stiffness, large static cutter relieving, chatter and tool wear during the cutting process. As an assisted machining method, ultrasonic vibration cutting has the advantages of cutting force reduction, system stiffness enhancement and chatter suppression. The ultrasonic vibration is applied to the deep-hole boring process, meanwhile, experiments for verifying the chip breaking condition, measuring the hole diameter error, measuring the finishing surface roughness and observing the surface morphology or profile are carried out. The results demonstrate that ultrasonic vibration boring can effectively overcome the chip block problem, reduce the hole diameter error and surface roughness and suppress the cutting chatter. Thus, the deep-hoe boring machining quality is improved.
ZHANG Xiangyu
,
SUI He
,
ZHANG Deyuan
,
WU Ruibiao
. The Improvement of Deep-hole Boring Machining Quality Assisted with Ultrasonic Vibration[J]. Journal of Mechanical Engineering, 2017
, 53(19)
: 143
-148
.
DOI: 10.3901/JME.2017.19.143
[1] 何定健,李建勋,王勇. 深孔加工关键技术及发展[J]. 航空制造技术,2008(21):90-97. HE Dingjian,LI Jianxun,WANG Yong. Key Technology and development of deep hole machining[J]. Aeronautical Manufacturing Technology,2008(21):90-97.
[2] 李文,王晓梅,徐明刚,等. 深孔数控变径超声椭圆振动镗削加工方法研究[J]. 兵工学报,2013,34(8):1021-1027. LI Wen,WANG Xiaomei,XU Minggang,et al. Deep hole machining method for nc adjustable diameter ultrasonic elliptical vibration boring[J]. Acta Armamentarill,2013,34(8):1021-1027.
[3] MA C,SHAMOTO E,MORIWAKI T,et al. Study of machining accuracy in ultrasonic elliptical vibration cutting[J]. International Journal of Machine Tools and Manufacture,2004(44):1305-1310.
[4] 马春翔,潘铭跃,王海丽. 弱刚度零件的超声波椭圆振动切削加工[J]. 南京航空航天大学学报,2005,37(S1):121-124. MA Chunxiang,PAN Mingyue,WANG Haili. Ultrasonic elliptical vibration cutting for weak rigidity workpiece[J]. Journal of Nanjing University of Aeronautics & Astronautics,2005,37(S1):121-124.
[5] 于劲. 分离型超声波振动切削消减颤振的机理[J]. 机械工程学报,1994,30(4):16-22. YU Jin. Theory of reducing chatter with separating type ultrasonic vibration[J]. Chinese Journal of Mechanical Engineering,1994,30(4):16-22.
[6] 张建中,李秀人,庞丽君,等. 超声振动精密深孔镗削试验研究[J]. 机械设计与制造,2005(11):133-134. ZHANG Jianzhong,LI Xiuren,PANG Lijun,et al. Experimental research on precise deep hole in ultrasonic vibration boring[J]. Machinery Design & Manufacture, 2005(11):133-134.
[7] 高印寒,沈维华,王立江. 超声波振动镗削的试验研究[J]. 农业机械学报,1997(1):127-130. GAO Yinhan,SHEN Weihua,WANG Lijiang. Experimental study of ultrasonic vibration boring[J]. Transactions of The Chinese Society of Agricultural Machinery,1997(1):127-130.
[8] 张建中,李秀人,庞丽君. 超声激振双刃镗刀精密深孔镗削的试验研究[J]. 工具技术,2006,40(10):29-31. ZHANG Jianzhong,LI Xiuren,PANG Lijun. Experimental research on ultrasonic vibration boring for precise deep holes by using double-edge boring cutter[J]. Tool Engineering,2006,40(10):29-31.
[9] MERCHANT M E. Basic mechanics of the metal cutting process[J]. Journal of Applied Mechanics,1944,11(A):168-175.
[10] 任国园. 超声振动高速铣削刀具系统稳定性的研究[D]. 焦作:河南理工大学,2012. REN Guoyuan. Study on tool system stability of ultrasound vibration high-speed milling[D]. Jiaozuo:Henan Polytechnic University,2012.
[11] 隋翯,张德远,陈华伟,等. 超声振动切削对耦合颤振的影响[J]. 航空学报,2016,37(5):1696-1704. SUI He,ZHANG Deyuan,CHEN Huawei,et al. Influence of ultrasonic vibration cutting on mode-coupling chatter[J]. Acta Aeronautical et Astronautical Sinica,2016,37(5):1696-1704.
