Creep damage is generally produced in the high temperature components of ultra-supercritical steam turbine which will detriment the structural integrity during the long term operation. Therefore, quick and effective identification of the creep damage is very critical for the service safety of steam turbine unit. In the present work, interrupted creep tests of FB2 steel which is commonly used in the ultra-supercritical steam turbine rotor have been conducted. Creep damaged specimens with various damage levels are thus generated. Using the damaged specimens, nonlinear longitudinal ultrasonic evaluation test has been performed and the nonlinear ultrasonic parameters of damaged specimens are obtained. Results indicate that nonlinear ultrasonic parameters increase with the increase of creep damage levels of steam turbine rotor steel. The microstructure of damaged specimens has been analyzed by using the transmission electron microscopy(TEM). Result reveals that the increase of nonlinear ultrasonic parameter can be ascribed to the increase of dislocation density. Furthermore, the increment of nonlinear ultrasonic parameter is related to the dislocation climbing at higher stress and to the dislocation slipping at lower stress. In terms of the dislocation theory, a correlation between the nonlinear ultrasonic parameters and the steady state creep strain rate has been developed accordingly.
ZHANG Meng
,
XUAN Fuzhen
. Creep Damage Evaluation of Steam Turbine Rotor Steel by Using the Nonlinear Ultrasonic Technique[J]. Journal of Mechanical Engineering, 2016
, 52(2)
: 76
-81
.
DOI: 10.3901/JME.2016.02.076
[1] 涂善东. 高温结构完整性原理[M]. 北京：科学出版社，2003. TU Shandong. High temperature structural integrity[M]. Beijing：Science Press，2003.
[2] 涂善东，轩福贞，王卫泽. 高温蠕变与断裂评价的若干关键问题[J]. 金属学报，2009，45(7)：781-787. TU Shandong，XUAN Fuzhen，WANG Weize. Some critical issues in creep and fracture assessment at high temperature[J]. Acta Metallurgica Sinica，2009，45(7)：781-787.
[3] RAJ B，MOORTHY V，JAYAKUMAR T，et al. Assessment of microstructures and mechanical behaviour of metallic materials through non-destructive characterization[J]. International Materials Reviews，2003，48(5)：273-325.
[4] 税国双，汪越胜，曲建民. 材料力学性能退化的超声无损检测与评价[J]. 力学进展，2005，35(1)：52-68. SHUI Guoshuang，WANG Yuesheng，QU Jianmin. Advances in nondestructive test and evaluation of material degradation using nonlinear ultrasound[J]. Advances in Mechanics，2005，35(1)：52-68.
[5] 周正干，刘斯明. 非线性无损检测技术的研究、应用和发展[J]. 机械工程学报，2011，47(8)：2-11. ZHOU Zhenggan，LIU Siming. Nonlinear ultrasonic techniques used in nondestructive testing: a review[J]. Journal of Mechanical Engineering，2011，47(8)： 2-11.
[6] SONY BABY，NAGARAJA K B，OMPRAKASH C M，et al. Creep damage assessment in titanium alloy using a nonlinear ultrasonic technique[J]. Scripta Materialia，2008，59：818-821.
[7] BALASUBRAMANIAM K，VALLURI J S，PRAKASH R V. Creep damage characterization using a low amplitude nonlinear ultrasonic technique[J]. Materials Characterization，2011，62(3)：275-286.
[8] VALLURI J S，BALASUBRAMANIAM K，PRAKASH R V. Creep damage characterization using non-linear ultrasonic techniques[J]. Acta Materialia，2010，58：2079-2090.
[9] KIM C. Creep damage characterization of Ni-based superalloy by acoustic nonlinearity[J]. Progress in Natural Science: Materials International，2012，22(4)：303-310.
[10] HIKATA A，CHICK B B，ELBAUM C. Dislocation contribution to the second harmonic generation of ultrasonic waves[J]. Journal of Applied Physics，1965，36：229-236.
[11] ZHANG Jianfeng，XUAN Fuzhen，XIANG Yanxun. Dislocation characterization in cold rolled stainless steel using nonlinear ultrasonic techniques: A comprehensive model[C]//Europhsics letters(EPL)，2013，103：68003.
[12] MALDINI M，ANGELLA G，LUPINC V. Analysis of creep curves of a nickel base superalloy in a wide stress/temperature range[J]. Materials science and Engineering：A，2007，462：436-440.
