Because of its service excellent performance and difficult processing, the 304 stainless steel has always been a hot research spot, especially on the acquirement and control of its good surface quality for processing. In order to study the characteristics of surface roughness of 304 stainless steel cut by self designed micro pit turning tool, It discussed the comparison experimental study on the surface roughness of 304 stainless steel bar cut by the common turning tool and micro pit turning tool respectively, and the mechanism of surface roughness reduction cut by micro pit turning tool is explained. By response surface experiments, the prediction model of surface roughness is established; the single factor and interaction effect of cutting parameters on the surface roughness is analyzed. The results show that the cutting force of micro pit turning tool is lower than that of common turning tool in the cutting process, which is the main reason for reducing the surface roughness. The surface roughness prediction model is with good reliability, the optimized cutting parameters acquired in the experiment can decrease the surface roughness by a percentage of up to 42.47% compared to the practical cutting parameters. Key word:micro pit turning tool;surface roughness;prediction model;304 stainless steel
YUAN Sen
,
HE Lin
,
ZHAN Gang
,
JIANG Hongwan
,
ZOU Zhongfei
. Research on Surface Roughness of 304 Stainless Steel Cut by Cemented Carbide Micro Pit Tool[J]. Journal of Mechanical Engineering, 2018
, 54(15)
: 232
-240
.
DOI: 10.3901/JME.2018.15.232
[1] ZHOU Fangjuan. A new analytical tool-chip friction model in dry cutting[J]. International Journal of Advanced Manufacturing Technology,2014,70(1-4):309-319.
[2] 杨超,刘小君,杨海东,等. 表面织构对刀具切削性能及前刀面摩擦特性的影响[J]. 摩擦学学报,2015,35(2):228-235. YANG Chao,LIU Xiaojun,YANG Haidong,et al. Effect of surface texture on cutting performance and friction characteristics of rake face[J].Tribology Journal,2015. 35(2):228-235.
[3] 张克栋,邓建新,邢佑强,等. 涂层刀具表面织构化及切削性能研究[J]. 润滑与密封,2015,40(2):8-16. ZHANG Kedong,DENG Jianxin,XING Youqiang,et al. Study on the surface texture and cutting properties of coating tools[J]. Lubrication and Sealing,2015,40(2):8-16.
[4] 周后明,罗文懿,龙远强,等. MoS2基固体润滑剂微织构自润滑刀具切削性能的研究[J]. 机械科学与技术,2017,36(8):1307-1312. ZHOU Houming,LUO Wenyi, LONG Yuanqiang,et al. Study on cutting performance of MoS2 Based Solid lubricant micro - texture self - lubrication cutter[J]. Mechanical Science and Technology,2017,36(8):1307-1312.
[5] 杨树财,王焕焱,张玉华,等. 多目标决策的微织构球头铣刀切削性能评价[J]. 哈尔滨理工大学学报,2016, 21(6):1-5. YANG Shucai,WANG Huanyi,ZHANG Yuhua,et al. Multi-objective decision-making micro-texture ball milling cutter cutting performance evaluation[J]. Journal of Harbin University of Science and Technology,2016,21(6):1-5.
[6] 罗育果,王鹏程,高涛. 低速铣削中表面粗糙度影响因素及切削参数优化研究[J]. 制造技术与机床,2017, 27(7):140-146. LUO Yuguo,WANG Pengcheng,GAO Tao. Influence factors of surface roughness and optimization of cutting parameters in low speed milling[J]. Manufacturing Technology and Machine Tools,2017, 27(7):140-146.
[7] 淮文博,唐虹. 表面粗糙度的砂布轮抛光工艺参数区间优化[J]. 航空精密制造技术,2017,53(2):14-18. HUAI Wenbo,TANG Hong. Interval optimization of polishing parameters of emery cloth wheel with surface roughness[J]. Aviation Precision Manufacturing Technology,2017,53(2):14-18.
[8] 蔡智杰,刘薇娜,高彬彬,等. 共轨管微小孔磨粒流抛光试验研究与表面粗糙度预测[J]. 机械科学与技术,2017,36(11):17221-1728. CAI Zhijie,LIU Weina,GAO Binbin,et al. Particle flow polishing experiment and surface roughness prediction of common rail micro-hole grinding[J]. Mechanical Science and Technology,2017,36(11):1722-1728.
[9] FU Li,LUO Jun,CHEN Weimin,et al. LS-SVM-based surface roughness prediction model for a reflective fiber optic sensor[J]. Chinese Optics Letters,2017,15(9):201-205.
[10] SCHWARTZENTRUBER J,SPELT JK,PAPINI M. Prediction of surface roughness in abrasive waterjet trimming of fiber reinforced polymer composites[J]. International Journal of Machine Tools and Manufacture,2017,122(1):1-17.
[11] RAFAEL S,VICTOR H,ARMANDO O. The effect of vertical scaling on the estimation of the fractal dimension of randomly rough surfaces[J]. Applied Surface Science,2017,425(1):838-846.
[12] BAFABER S A,YUSOFF A R. Multi-objective optimization of cutting parameters to minimize power consumption in dry turning of stainless steel 316[J]. Journal of Cleaner Production,2017,157(1):30-46.
[13] QU Sheng,ZHAO Jibin,WANG Tianran. Experimental study and machining parameter optimization in milling thin-walled plates based on NSGA-Ⅱ[J].International Journal of Advanced Manufacturing Technology,2017, 89(8):2399-2409.
[14] 刘东雷,申长雨,刘春太,等. 基于响应曲面法与改进遗传算法的RHCM成型工艺优化[J]. 机械工程学报,2011,47(14):54-61. LIU Donglei,SHEN Changyu,LIU Chuntai,et al. Efficient process parameters optimization of rapid heat cycling molding technology based on response surface methodology and improved genetic algorithm[J]. Journal of Mechanical Engineering,2011,47(14):54-61.
[15] 郭宏,焦黎,闫献国,等. 基于二阶响应曲面法的高速钢丝锥寿命预测研究[J]. 北京理工大学学报,2015,35(5):467-470. GUO Hong,JIAO Li,YAN Xianguo,et al. Study on life prediction of high-speed steel tap based on second-order response surface method[J]. Journal of Beijing Institute of Technology,2015,35(5):467-470.
[16] FILICE L,MICARI F,SETTINEI L,et al. Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools[J]. Wear,2007,262(5-6):545-554.
[17] JIANG Hongwan,HE Lin,YANG Xinyu,et al. Prediction and experimental research on cutting energy of a new cemented carbide coating micro groove turning tool[J]. International Journal of Advanced Manufacturing Technology,2017,89(5-8):2335-2343.
