With the increasing application of polymers in automobile industry, the performances of polymers, which vary widely at high and low temperature, have assignable influence upon automobile safety. Hence, Based on the theoretical and experimental study of scholars, a constitutive model involved 3 adjustable parameters is deduced to use actual requirement. The constitutive model could be directly presented by basic quantity, such as elastic modulus E, yield strength δy and stress ε. Meanwhile, the relationship between temperature and yield strength,elastic modulus are obtained as well. The model is constructed by only stress-strain relation at room temperature and at least 4 data of yield strength and elastic modulus to predict the mechanical behavior at high and low temperature. Thus, the difficulty and intensity of experiments caused by strain meter at high and low temperature is considerably minimized. The validity of the algorithm is verified by experiments. The new model is an effective method for obtaining the mechanical behavior of polymers at high and low temperature.
LI Guiqin
,
CHEN Yang
,
RUAN Bin
,
GUO Qing
,
ZHOU Junlong
. A Constitutive Model of Polymer at Different Temperature[J]. Journal of Mechanical Engineering, 2016
, 52(12)
: 67
-73
.
DOI: 10.3901/JME.2016.12.067
[1] 孙以实,张增民,傅增力,等. 弹性体共混改性聚丙烯的增韧机理[J]. 高分子学报,1995,1(1)：82-87.
SUN Yishi,ZHANG Zengmin,FU Zengli,et al. The toughening mechanism of modified polypropylene elastomer blends[J]. Acta Polymerica Sinica,1995,1(1)：82-87.
[2] 刘广建,孟惠荣. 用考虑了粘弹性的有限元法对塑料齿轮进行计算分析[J]. 机械工程学报,2002,38(6)：43-46.
LIU Guangjian,MENG Huirong. The finite element analysis of plastic gear by considering viscoelasticity[J]. Chinese Journal of Mechanical Engineering,2002,38(6)：43-46.
[3] 侯珍秀,李玉梅,张楠,等. 聚碳酸酯板材中、低温本构模型的建立[J]. 哈尔滨工业大学学报,2013,45(11)：38-44.
HOU Zhenxiu,LI Yumei,ZHANG Nan, et al. The establishment of the constitutive model of polycarbonate sheet at low or medium temperature[J]. Journal of Harbin Institute of Technology,2013,45(11)：38-44.
[4] 宋玉泉. 超塑拉伸变形的力学解析[J]. 机械工程学报,2003,39(10)：64-72.
SONG Yuquan. Mechanical analysis of superplastic tensile deformation[J]. Chinese Journal of Mechanical Engineering,2003,39(10)：64-72.
[5] 吴杰,上官文斌,潘孝勇. 采用超弹性-粘弹性-弹塑性本构模型的橡胶隔振器动态特性计算方法[J]. 机械工程学报,2010,46(14)：109-114.
WU Jie,SHANGGUAN Wenbin,PAN Xiaoyong. Computational method for dynamic properties of rubber isolators using hyperelastic-viscoelastic-plastoelastic[J]. Journal of Mechanical Engineering,2010,46(14)：109-114.
[6] DUFFO P,MONASSE B,HAUDIN J M,et al. Rheology of polypropylene in the solid state[J]. Journal of Materials Science,1995,30(3)：701-711.
[7] KITAGAWA M,MORI T,MATSUTANI T. Rate-dependent nonlinear constitutive equation of polypropylene[J]. Journal of Polymer Science Part B：Polymer Physics,1989,27(1)：85-95.
[8] BRUSSELLE-DUPEND N,LAI D,FEAUGAS X,et al. Mechanical behavior of a semicrystalline polymer before necking. Part II：Modeling of uniaxial behavior[J]. Polymer Engineering & Science,2003,43(2)：501-518.
[9] 喻炳,施绍裘. PP/PA 共混高聚物在冲击载荷下的热粘弹性力学响应[J]. 宁波大学学报,2005,18(2)：163-169.
YU Bing,SHI Shaoqiu. Thermo viscoelastic mechanical response of PP/PA blends at high strain rates[J]. Journal of Ningbo University,2005,18(2)：163-169.
[10] 黄德进,孙紫建,王礼立. 高聚物材料动态本构关系对 PP/PA 共混物的应用研究[J]. 材料工程,2006(3)：3-5.
HUANG Dejin,SUN Zijian,WANG Lili. Study on PP/PA blend material by polymer dynamic constitutive relation[J]. Material Engineering,2006(3)：3-5.
[11] 沈利君,卞忠景. 有限变形的三维粘弹性本构模型[J]. 宁波大学学报,2012,25(1)：64-69.
SHEN Lijun,BIAN Zhongjing. A three-dimensional viscoelastic consititutive model of finite deformation[J]. Journal of Ningbo University,2012,25(1)：64-69.
[12] 王宝珍,胡时胜,周相荣. 不同温度下橡胶的动态力学性能及本构模型研究[J]. 实验力学,2007,22(1)：1-6.
WANG Baozhen,HU Shisheng,ZHOU Xiangrong. Under different temperature dynamic mechanical properties and constitutive model of rubber research[J]. Experimental Mechanics,2007,22(1)：1-6.
[13] DROZDOV A D. Linear thermo-viscoelasticity of polypropylene[J]. Mechanics Research Communications,2010,37(8)：690-695.
[14] ZHOU Yuanxin,MALLICK P K. Effects of temperature and strain rate on the tensile behavior of unfilled and talc- filled polypropylene. Part I：Experiments[J]. Polymer Engineering & Science,2002,42(12)：2449-2460.
[15] ZHOU Yuanxin,MALLICK P K. Effects of temperature and strain rate on the tensile behavior of unfilled and talc-filled polypropylene. Part II：Constitutive equation[J]. Polymer Engineering & Science,2002,42(12)：2461-2470.
[16] HUFENBACH W,GUDE M,BOHM R,et al. The effect of temperature on mechanical properties and failure behaviour of hybrid yarn textile-reinforced thermoplastics[J]. Materials & Design,2011,32(8)：4278-4288.
