In order to guarantee higher stability precision, torque motors are generally employed to drive the integrated gimbal frames of the photoelectric stabilized platform directly. This leads to a lower load/self-weight ratio and makes it difficult to meet the requirement of light-weighted carriers like the unmanned aerial vehicle (UAV) in the future. A design scheme of inertially stabilized platform based on differential cable-driven mechanism is proposed based on the overview about the basic style of cable drive. Firstly, the topological structure, operating principle and structural features are analyzed. The kinematics is further studied to describe the quantitative relationship of the velocity inputs and outputs based on oriented graph method. And the results on the dynamic transfer characteristics between system inputs and load ends indicate that the essence of the differential mechanism is to enlarge and redistribute the input torques after synthesis, which has a major impact on increasing its load capacity. Results of theoretical analysis show that the platform designed and studied here can realize the motion of 2-DOF with power transmission and control, and validate the proposed scheme. The new configuration application is significant in reducing the weight of the drive system and enhancing the output torque. This may provide a reference for the further stabilized platform design.
LI Daquan
,
HONG Huajie
,
JIANG Xianliang
,
LIU Hua
,
HE Hanhui
. Design and Analysis of Differential Cable-driven Stabilized Platform[J]. Journal of Mechanical Engineering, 2018
, 54(13)
: 135
-141
.
DOI: 10.3901/JME.2018.13.135
[1] 范大鹏,鲁亚飞,范世珣,等. 光电探测伺服系统设计与制造:挑战与对策[J]. 应用光学, 2011, 32(3):377-384. FAN Dapeng, LU Yafei, FAN Shixun, et al. Design and implementation of servo system for electro-optical tracker[J]. Journal of Applied Optics, 2011, 32(3):377-384.
[2] 张平. 机载/弹载视觉导引稳定平台的建模与控制[M]. 北京:国防工业出版社, 2011. ZHANG Ping. Modeling and control of airborne/missile-borne vision guidance stabilized platform[M]. Beijing:National Defense Industry Press, 2011.
[3] HILKERT J M. Inertially stabilized platform technology concepts and principles[J]. IEEE Control Systems, 2008, 28(1):26-46.
[4] 谭淞年,李全超,张洪伟,等. 某航空光电稳定平台方位框架设计与分析[J]. 应用光学, 2016, 37(3):327-331. TAN Songnian, LI Quanchao, ZHANG Hongwei, et al. Design and analysis of azimuth-gimbal in aerial opto-electronic stabilized platform[J]. Journal of Applied Optics, 2016, 37(3):327-331.
[5] 沈颖凡,赵嫔娅,陈祖金. 航空吊舱稳定平台结构设计[J]. 航空兵器, 2010(3):61-64. SHEN Yingfan, ZHAO Pinya, CHEN Zujin. Airborne pod stabilized platform structure design[J]. Aero Weaponry, 2010(3):61-64.
[6] BASER O, KONUKSEVEN E I. Theoretical and experimental determination of capstan drive slip error[J] Mechanism & Machine Theory, 2010, 45(6):815-827.
[7] 张连超,鲁亚飞,范大鹏,等. 精密绳传动空回特性分析与验证[J]. 航空兵器, 2014(1):14-20. ZHANG Lianchao, LU Yafei, FAN Dapeng, et al. Verification and analysis of cable drive transmissions backlash characteristics[J]. Aero Weaponry, 2014(1):14-20.
[8] XU Yundong, ZHANG Dongsheng, WANG Min, et al. Type synthesis of two-degrees-of-freedom rotational parallel mechanism with two continuous rotational axes[J]. Chinese Journal of Mechanical Engineering, 2016, 29(4):694-702.
[9] 鲁亚飞. 精密柔索传动机理与设计方法研究[D]. 长沙:国防科学技术大学, 2013. LU Yafei. Study on the principle and design method of the precise cable drive[D]. Changsha:National University of Defense Technology, 2013.
[10] NI Yanbing, WU Nan, ZHONG Xueyong, et al. Dimensional synthesis of a 3-DOF parallel manipulator with full circle rotation[J]. Chinese Journal of Mechanical Engineering, 2015, 28(4):830-840.
[11] 刘晓,赵铁石,边辉,等. 耦合型3自由度并联稳定平台机构动力学分析[J]. 机械工程学报, 2013, 49(1):45-52. LIU Xiao, ZHAO Tieshi, BIAN Hui, et al. Dynamics analysis of a 3-DOF coupling mechanism for stabilized platform[J]. Journal of Mechanical Engineering, 2013, 49(1):45-52.
[12] 刘成颖,谭锋,王立平,等. 面向机床整机动态性能的立柱结构优化设计研究[J]. 机械工程学报,2016,52(3):161-168. LIU Chengying, TAN Feng, WANG Liping, et, al. Research on optimization of column structure design for dynamic performance of machine tool[J]. Journal of Mechanical Engineering, 2016, 52(3):161-168.
[13] 刘佳顺,刘检华,金望韬,等. 稳定平台中活动线缆的虚拟布局设计方法[J]. 机械工程学报, 2016, 52(21):111-119. LIU Shunjia, LIU Jianhua, JIN Wangtao, et, al. A virtual layout design method of motional cable in stabilized platform[J]. Journal of Mechanical Engineering, 2016, 52(21):111-119.
[14] AMIRINESHAD S V, UYGUROĞIU M K. Kinematic analysis of geared robotic mechanism using matroid and T-T graph methods[J]. Mechanism & Machine Theory, 2015, 88:16-30.
[15] UYGUROĞLU M K, DEMIREL H. Kinematic analysis of tendon-driven robotic mechanisms using oriented graphs[J]. Acta Mechanica, 2006, 182(3):265-277.
