The simulation model of the fluid domain and solid domain was established by means of bidirectional fluid-solid coupling to investigate the conduction efficiency reducing phenomenon in the elbow, whose dynamic characteristics change with the variation of the external excitation on the tunnel boring machine (TBM) during the service process. The stress solution of the elbow solved by the finite element method (FEM) has good consistency with the experimental results. Both of the influence of the foundation vibration parameters and the structural parameters of the elbow on the dynamic characteristics are researched. It is indicated that bidirectional fluid-solid coupling method can be present the dynamic characteristics of the elbow under strong vibration service condition more clearly, and some guidance to the design and selection of the elbow can be provided.
QU We
,
ZHANG Huailiang
,
NING Haihui
,
LIU Sen
. Dynamic Characteristics of the Hydraulic Bend Pipe on the TBM[J]. Journal of Mechanical Engineering, 2018
, 54(1)
: 82
-89
.
DOI: 10.3901/JME.2018.01.082
[1] 杜彦良,杜立杰. 全断面岩石隧道掘进机-系统原理与集成设计[M]. 武汉:华中科技大学出版社,2010. DU Yanliang,DU Lijie. Full face hard rock tunnel boring machine-system principles and integrated design[M]. Wuhan:Huazhong University of Science and Technology Press,2010.
[2] SVETLISKY V A. Statics,stability and small vibration of the flexible tubes conveying ideal incompressible fluid[J]. Raschetv na Prochnost,1969,14:332-351.
[3] CHEN S S. Flow induced in plane instability of curved pipes[J]. Nuclear Engineering and Design,1972,23:29-38.
[4] MISRA A K,PAIDOUSSIS M P,VAN K S. On the dynamics of curved pipes transporting fluid. Part I:Inextensible theory[J]. Journal of Fluids and Structures,1988,2:211-244.
[5] AITHAL R,GIPSON G S. Instability of internally damped curved pipes[J]. ASCE Journal of Engineering Mechanics,1990,116:77-99.
[6] SASICY R,SASIC S. A new approach to the velocity field investigation in case of the entry flow in curved pipes with circular cross section[J]. Acta Mechanica,2000,3(140):485-492.
[7] ABHARI M N,GHODSIAN M. Experimental and numerical simulation of flow in a 90°bend[J]. Flow Measurement and Instrumentation,2010,3(21):526-531.
[8] MENSKYKOVA M,GUZ I A. Stress analysis of layered thick-walled composite pipes subjected to bending loading[J]. International Journal of Mechanical Sciences,2014,88:289-299.
[9] WU Xiaonan,SHU Haowen,SHEN Kunrong,et al. Stress analysis of gas pipeline in tunnels on pressure testing condition[J]. ICPTT,2012:238-247.
[10] XIA Li,HUANG Kun,HONG Fanglu,et al. Stress analysis of suspended gas pipeline[J]. Applied Mechanics and Materials,2013,448(4):1359-1362.
[11] 金基铎,杨晓东,邹光胜. 两端支撑输流管道的稳定性和临界流速分析[J]. 机械工程学报,2006,42(11):131-136. JIN Jiduo,YANG Xiaodong,ZOU Guangsheng. Stability and critical flow velocity of supported pipes conveying fluid[J]. Chinese Journal of Mechanical Engineering,2006,42(11):131-136.
[12] 杨莹,陈志英. 航空发动机管路流固耦合固有频率计算与分析[J]. 燃气涡轮试验与研究,2010,23(1):42-46,25. YANG Ying,CHEN Zhiying. Calculation and analysis on natural frequency of fluid structure interaction in aero-engine pipelines[J]. Gas Turbine Experiment and Research,2010,23(1):42-46,25.
[13] 王世忠,于石声. 载流管道固液耦合振动计算[J]. 哈尔滨工业大学学报,2001,33(6):816-818,841. WANG Shizhong,YU Shisheng. Calculation for solid-liquid coupling vibration on fluid conveying pipe[J]. Journal of Harbin Institute of Technology,2001,33(6):816-818,841.
[14] 徐合力,蒋炎坤. 弯曲输流管道流固耦合流动特性研究[J]. 武汉理工大学学报,2008(2):343-346. XU Heli,JIANG Yankun. Research on flow characteristics of fluid-solid coupling in bent pipe[J]. Journal of Wuhan University of Technology,2008(2):343-346.
[15] 荆洪英,金基铎,闻邦椿. 一端固定具有中间支撑输流管道临界流速及稳定性分析[J]. 机械工程学报,2009,45(3):89-93. JING Hongying,JIN Jiduo,WEN Bangchun. Stability and critical flow velocity analysis of a clamped pipe conveying fluid with intermediate support[J]. Journal of Mechanical Engineering,2009,45(3):89-93.
