Influence of Fractal Backlash on Dynamic Behavior of Gear-bearing System

  • LI Xiaopeng ,
  • MU Jiaxin ,
  • PAN Wujiu ,
  • WEN Bangchun
Expand
  • School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819

Received date: 2017-05-15

  Revised date: 2017-11-23

  Online published: 2018-05-05

Abstract

The chief objective is to study the influence of the fractal backlash on the dynamic characteristics of the gear bearing system. Firstly, the dynamic model of the system is established, and the influence of the rotating shaft and bearing on the dynamic characteristics of the system is considered. The nonlinear factors such as the nonlinear oil film force of the journal bearing, the time-varying meshing stiffness of gear and the dynamic transmission error are analyzed. In this paper, the fractal theory is introduced into the dynamic analysis of the system, the fractal behavior of the backlash is discussed, and the W-M function is employed to describe this fractal behavior. Runge-Kutta method is used to solve the dynamic equation, and the phase diagram of the system response, Poincare section and bifurcation diagram are obtained. The results reveal that when the meshing stiffness is large, the bifurcation behavior of the system is reduced, 1 periodic motion and chaos appear alternately; when the backlash fluctuates in a small range when compared to the fixed backlash, there are more details of the system response when using the fractal backlash, and the dynamic characteristics of the system can be described more accurately; with the increase of meshing stiffness, the system can keep the 1 period motion when the fractal dimension D is large, which means the system is more stable when the stiffness is large.

Cite this article

LI Xiaopeng , MU Jiaxin , PAN Wujiu , WEN Bangchun . Influence of Fractal Backlash on Dynamic Behavior of Gear-bearing System[J]. Journal of Mechanical Engineering, 2018 , 54(9) : 153 -160 . DOI: 10.3901/JME.2018.09.153

References

[1] KAHRAMAN A, SINGH R. Non-linear dynamics of a geared rotor-bearing system with multiple clearances[J]. Journal of Sound and Vibration, 1991, 144(3):469-506.
[2] KAHRAMAN A, SINGH R. Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system[J]. Journal of Sound and Vibration, 1991, 146(1):135-156.
[3] VAISHYA M, SINGH R. Sliding friction-induced non-linearity and parametric effects in gear dynamics[J]. Journal of Sound and Vibration, 2001, 248(4):671-694.
[4] CHANG-JIAN C W. Non-linear dynamic analysis of a HSFD mounted gear-bearing system[J]. Nonlinear Dynamics, 2010, 62(1-2):333-347.
[5] CHANG-JIAN C W. Bifurcation and chaos of gear-rotor-bearing system lubricated with couple-stress fluid[J]. Nonlinear Dynamics, 2015, 79(1):749-763.
[6] XIANG Ling, JIA Yi, HU Aijun. Bifurcation and chaos analysis for multi-freedom gear-bearing system with time-varying stiffness[J]. Applied Mathematical Modelling, 2016, 40(23):10506-10520.
[7] 魏莎,韩勤锴,褚福磊. 考虑不确定性因素的齿轮系统动力学研究综述[J]. 机械工程学报, 2016, 52(1):1-19. WEI Sha, HAN Qinkai, CHU Fulei. Review on research of uncertain dynamics for gear system[J]. Journal of Mechanical Engineering, 2016, 52(1):1-19.
[8] LU Jianwei, CHEN Hao, ZENG Fanling, et al. Influence of system parameters on dynamic behavior of gear pair with stochastic backlash[J]. Meccanica, 2014, 49(2):429-440.
[9] 卢剑伟,曾凡灵,杨汉生,等. 随机装配侧隙对齿轮系统动力学特性的影响分析[J]. 机械工程学报, 2010, 46(21):82-86. LU Jianwei, ZENG Fanling, YANG Hansheng, et al. Influence of stochastic assembling backlash on nonlineardynamic behavior of transmission gear pair[J]. Journal of Mechanical Engineering. 2010, 46(21):82-86.
[10] WEN Yuebing, YANG Jianming, WANG Shiyu. Random dynamics of a nonlinear spur gear pair in probabilistic domain[J]. Journal of Sound & Vibration, 2014, 333(20):5030-5041.
[11] CHEN Qi, MA Yunbo, HUANG Shouwu, et al. Research on gears' dynamic performance influenced by gear backlash based on fractal theory[J]. Applied Surface Science, 2014, 313:325-332.
[12] CAPONE G, RUSSO M, RUSSO R. Dynamic characteristics and stability of a journal bearing in a non-laminar lubrication regime[J]. Tribology International, 1987, 20(5):255-260.
[13] 李小彭,王伟,赵米鹊,等. 考虑摩擦因素影响的结合面切向接触阻尼分形预估模型及其仿真串[J]. 机械工程学报, 2012, 48(23):46-50. LI Xiaopeng, WANG Wei, ZHAO Mique, et al. Fractal prediction model for tangential contact damping of joint surface considering friction factors and its Simulation[J]. Journal of Mechanical Engineering, 2012, 48(23):46-50.
[14] 李小彭,潘五九,高建卓,等. 结合面形貌特性对模态耦合不稳定系统的影响[J]. 机械工程学报, 2017(5):116-127. LI Xiaopeng, PAN Wujiu, GAO Jianzhuo, et al. Influence of surface topography characteristics on mode coupling instability system[J]. Journal of Mechanical Engineering, 2017(5):116-127.
[15] MAJUMDAR A A, BHUSHAN B. Role of Fractal geometry in roughness characterization and contact mechanics of surfaces[J]. Journal of Tribology, 1990, 112(2):205-216.
Outlines

/