As the attenuation of the dB(A) is very large at the low frequency area of a sound, there always exists an annoying noise with the dB(A) result meet the standard. Loudness as one of the psychoacoustics parameters is introduced, the acoustic character of the interior noise is analyzed by use of the virtual simulation method. A vibro-acoustic model of the cab is built to calculate the acoustic force response with the input of experiment incentive data. Loudness objective psychoacoustics parameters calculation analysis model is built based on matlab. A comparison is made between sound pressure level distribution and loudness distribution of the indoor noise. With the help of sound pressure level contribution analysis and loudness contribution analysis, an analysis is made to find the difference between sound pressure level evaluation and loudness parameter evaluation,and then it is applied to identify relationship of vehicle interior noise source. Based on the analysis, an optimization of the cab structure damping is made, hence comprehensive improve the interior acoustic quality.
GAO Yinhan
,
ZHANG Litong
,
LIANG Jie
,
WANG Zhibo
,
JIANG Wenjun
. Prediction and Research of Interior Noise Loudness Parameter Based on Vibro-acoustic Model[J]. Journal of Mechanical Engineering, 2016
, 52(12)
: 136
-143
.
DOI: 10.3901/JME.2016.12.136
[1] GLENN P,LIM T C. Intelligent systems approaches to product sound quality evaluations—A review[J] . Applied Acoustics,2012,73(10)：987-1002.
[2] MOHD J,MOHD N,MOHAMMAD H F. Index for vehicle acoustical comfort inside a passenger car[J]. Applied Acoustics,2008,69(4)：343-353.
[3] de OLIVEIRA L P R,da SILVA M M,MOSQUERA S J A. Loudness scattering due to vibro-acoustic model variability[J]. Society of Mechanical Sciences and Engineering,2012,34(2)：604-611.
[4] KLAUS G. Product sound quality of vehicle noise-A permanent challenge for NVH measurement technologies[R]. SAE,2008-36-0517,2008.
[5] LEE S K,KIM B S,CHAE H C. Sound quality analysis of a passenger car based on rumbling index[R]. SAE,2005-01-2481,2005.
[6] 范蓉平,孟光,孙旭,等. 基于心理声学响度分析的高速列车车内噪声评价[J]. 振动与冲击,2005,24(5)：355-340.
FAN Rongping,MENG Guang,SUN Xu,et al. Sound loudness of high-speed trains evaluation[J]. Journal of Vibration and Shock,2005,24(5)：355-340.
[7] WOOKEUN S,HARUKI S,KARIM H. Improved noise source identification using sound quality metrics mapping in vehicle noise measurements[R]. SAE,2011-01-1671,2011.
[8] 吴光强,盛云,方园. 基于声学灵敏度的汽车噪声声-固耦合有限元分析[J]. 机械工程学报,2009,45(3)：222-228.
WU Guangqiang,SHENG Yun,FANG Yuan. Coupled acoustic-structural finite element analysis of vehicle interior noise based on acoustic sensitivity[J]. Journal of Mechanical Engineering,2009,45(3)：222-228.
[9] 马天飞,高刚,王登峰,等. 基于声固耦合模型的车内低频结构噪声响应分析[J]. 机械工程学报,2011,47(15)：76-82.
MA Tianfei,GAO Gang,WANG Dengfeng,et al. Response analysis of interior structure noise in lower frequency based on structure-acoustic coupling model [J]. Journal of Mechanical Engineering,2011,47(15)：76-82.
[10] RONACHER A W,HUSSAIN M,BIERMAYER W,et al. Evaluating vehicle interior noise quality under transient driving condition[R]. SAE,1999-01-1683,1999.
[11] 高印寒,张澧桐,梁杰,等. 基于客观心理声学参数的重型商用车车内异响噪声分析[J]. 吉林大学学报,2016,46(1)：43-49.
GAO Yinhan,ZHANG Litong,LIANG Jie,et al. Abnormal noise analysis for commercial vehicle cab based on psychoacoustics[J],Journal of Jilin University,2016,46(1)：43-49.
[12] 高印寒,唐荣江,梁杰,等. 汽车声品质的GA-BP神经网络预测与权重分析[J]. 光学精密工程,2013,21(2)：462-468.
GAO Yinhan,TANG Rongjiang,LIANG Jie,et al. Vehicle sound quality GA-BP neural network prediction and weight analysis[J]. Optics and Precision Engineering,2013,21(2)：462-468.
[13] 杜功焕,朱哲民,龚秀芬. 声学基础[M]. 南京：南京大学出版社,2011.
DU Gonghuan,ZHU Zhemin,GONG Xiufen. Fundamentals of acoustics[M]. Nanjing：Nanjing University Institute of Technology Press,2011.
[14] ZWICKER E,FASTL H. Psychoacoustics：Facts and models[M]. New York：Springer,1999.
[15] MOORE B C,GLASBERG B R. Suggested formulae for calculating auditory-filter shapes and excitation paterns[J]. Acoustical Society of America,1983,74(2)：750-753.
[16] 张志飞,倪新帅,徐中明,等. 利用阻尼材料改善驾驶室声学特性的研究[J]. 机械工程学报,2012,48(16)：36-40.
ZHANG Zhifei,NI Xinshuai,XU Zhongming,et al. Research on improvement of cab acoustic characteristics using damping material[J]. Journal of Mechanical Engineering,2012,48(16)：36-40.
[17] 张志勇,张义波,刘鑫,等. 重型卡车驾驶室结构噪声预测与板件声学贡献度分析[J]. 振动与冲击,2014,33(13)：67-71.
ZHANG Zhiyong,ZHANG Yibo,LIU Xin,et al. Structure-borne noise prediction and panel acoustic contribution analysis of a heavy truck cab[J]. Journal of Vibration and Shock,2014,33(13)：67-71.
