On the Design and Experiments of a Gas Fuel-powered Hopping Robot

  • ZUO Fangrui ,
  • WANG Huaming ,
  • LUAN Yunguang ,
  • ZHU Jianying ,
  • WANG Zhen ,
  • HUANG Qingyun
Expand
  • 1. College of Mechanical and Electrical Engineering, Nanjing University of Aercnautics and Astronautics, Nanjing 210016;
    2. State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027

Online published: 2016-06-05

Abstract

A hopping robot, powered by combustible gas mixture, is designed, which includes a hopping actuator and a wheeled locomotive structure. The actuator is characterized by a double-piston structure and a magnetic latch, which are beneficial to the volume reduction, reset and waste gas exclusion of the actuator. The wheeled structure consists of a vehicle body and honeycombed wheels. The vehicle body serves as the carrier of the hopping actuator, while wheels as landing buffer of the robot. The equivalent radial, tangential and shear modulus of wheels are calculated, and then Timoshenko Beam Theory is used for static analysis of wheels, and analytic results agree well with experimental data. The energy consumption of wheels during landing is obtained by landing collision simulation using LS-DYNA. The hopping locomotion of the robot is planned and hopping experiments show the robot can jump onto or over obstacles, and hopping ability of the robot is verified. This research provides a feasible technical scheme for improving the capability of field robots over unknown and complex terrains.

Cite this article

ZUO Fangrui , WANG Huaming , LUAN Yunguang , ZHU Jianying , WANG Zhen , HUANG Qingyun . On the Design and Experiments of a Gas Fuel-powered Hopping Robot[J]. Journal of Mechanical Engineering, 2016 , 52(11) : 19 -21 . DOI: 10.3901/JME.2016.11.019

References

[1] KOH D Y,KIM S H,KIM K. Design and modeling of an image stabilizing device for small unmanned ground vehicle[C]//Proceedings of 12th International Conference on Control,Automation and Systems (ICCAS),October 17-21,2012,Jeju Isaland,South Korea.Piscataway:IEEE,2012:2125-2130.
[2] LAURIA M,PIGUET Y,SIEGWART R. Octopus-an autonomous wheeled climbing robot[C]//Proceedings of the 5th International Conference on Climbing and Walking Robots,September 25-27,2002,Paris,France. London:Professional Engineering Publishing Limited,2002,315-322.
[3] HIROSE S,FUKUSHIMA E F,DAMOTO R,et al. Design of terrain adaptive versatile crawler vehicle HELIOS-VI[C]//Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, October 29 - November 3,2001, Maui,USA. Piscataway:IEEE,2001:1540-1545.
[4] MICHAUD F,LETOURNEAU D,ARSENAULT M,et al. Multi-modal locomotion robotic platform using leg-track-wheel articulations[J]. Autonomous Robots,2005,18(2):137-156.
[5] ZHAO J,XU J,GAO B,et al. MSU Jumper:A single-motor-actuated miniature steerable jumping robot[J]. IEEE Transactions on Robotics,2013,29(3):602-614.
[6] BURDICK J,FIORINI P. Minimalist jumping robots for celestial exploration[J]. The International Journal of Robotics Research,2003,22(7-8):653-674.
[7] KOVAC M,FUCHS M,GUIGNARD A,et al. A miniature 7g jumping robot[C]//Proceedings of the International Conference on Robotics and Automation (ICRA),May 19-23,2008,Pasadena,USA. Pasadena:IEEE,2008:373-378.
[8] NOH M,KIM S W,AN S,et al. Flea-inspired catapult mechanism for miniature jumping robots[J]. IEEE Transactions on Robotics,2012,28(5):1007-1018.
[9] 柴辉,葛文杰,魏敦文,等. 一种间歇式弹跳机器人的机构设计与跳跃性能分析[J]. 机械工程学报,2012,48(13):19-26.
CHAI Hui,GE Wenjie,WEI Dunwen,et al. Mechanism design and hopping performance analysis of an intermittent hopping robot[J]. Journal of Mechanical Engineering,2012,48(13):19-26.
[10] 陈殿生,张自强,陈科位. 仿生蝗虫机构着陆缓冲过程中的能量分配[J]. 机械工程学报,2015,51(13):196-202.
CHEN Diansheng,ZHANG Ziqiang,CHEN Kewei. Energy allocation in landing buffering process for biomimetic locust mechanism[J]. Journal of Mechanical Engineering,2015,51(13):196-202.
[11] TSUKAGOSHI H,SASAKI M,KITAGAWA A,et al. Design of a higher jumping rescue robot with the optimized pneumatic drive[C]//Proceedings of the IEEE International Conference on Robotics and Automation(ICRA),April 18-22,2005,Barcelona,Spain. Pasadena:IEEE,2005:1276-1283.
[12] FISCHER G J. Wheeled hopping robot:USA,7775305[P]. 2010-08-17.
[13] WANG Huaming,LUAN Yunguang,OETOMO D,et al. Design,analysis and experimental evaluation of a gas-fuel-powered actuator for robotic hoppers[J]. IEEE/ASME Transactions on Mechatronics,2015,20(5):2264-2275.
[14] LANCASTER D. Some energy fundamentals[J]. Blatant Opportunist,2002,71:1-7.
[15] MANESH A,TERCHA M J,MELISKA B,et al. Tension-based non-pneumatic tire:USA,0011506 A1[P]. 2011-09-20.
[16] GIBSON L J,ASHBY M F,SCHAJER G S,et al. The mechanics of two-dimensional cellular materials[J]. Proceedings of the Royal Society of London Mathematical and Physical Sciences,1982,382(1782):25-42.
[17] 铁木辛柯,古地尔. 弹性理论[M]. 北京:高等教育出版社,2013.
TIMOSHENKO S P,GOODIER J N. Theory of Elasticity[M]. Beijing:Higher Education Press,2013.
[18] GASMI A,JOSEPH P F,RHYNE T B,et al. Closed-form solution of a shear deformable,extensional ring in contact between two rigid surfaces[J]. International Journal of Solids and Structures,2011,48(5):843-853.
[19] GASMI A,JOSEPH P F,RHYNE T B,et al. Development of a two-dimensional model of a compliant non-pneumatic tire[J]. International Journal of Solids and Structures,2012,49(13):1723-1740.
[20] 姚伟岸,钟万勰. 辛弹性力学[M]. 北京:高等教育出版社,2002.
YAO Weian,ZHONG Wanxie. Symplectic elasticity[M]. Beijing:Higher Education Press,2002.
Outlines

/