Based on the thermal analysis of surface grinding, according to triangular heat flux and one-dimensional linear heat conduction, a numerical model for temperature calculation in form grinding is set up. Grinding burn was most likely to happen at the place of the junction of two adjacent planes in form grinding, the coupling effect of heat source at the junction is investigated and the reason could be quantitative analyzed by this model. According to the mathematical model of energy partition ratio and real contact arc length in surface grinding, the computational method of energy partition ratio in form grinding which includes plane and inclined plane grinding is determined. Experimental measuring method of the temperature in form grinding is designed; the numerical model for temperature calculation in form grinding had been verified by tests result. The result indicated that with the coupling effect of heat source in form grinding, the junction had the highest temperature rise which would induce grinding burn.
GUO Guoqiang
,
AN Qinglong
,
LIN Lifang
,
YANG Changqi
,
CHEN Ming
. Analytical and Experimental Investigation of Temperature in Form Grinding[J]. Journal of Mechanical Engineering, 2018
, 54(3)
: 203
-215
.
DOI: 10.3901/JME.2018.03.203
[1] ZHANG Liangchi,MOFID M. Applied mechanics in grinding-IV. The mechanism of grinding induced phase transformation[J]. International Journal of Machine Tools & Manufacture,1995,35(10):1397-1409.
[2] 毛聪. 平面磨削温度场及热损伤的研究[D],长沙:湖南大学,2008. MAO Cong. The research on the temperature field and thermal damage in the surface grinding[D]. Changhai:Hunan University,2008.
[3] 张磊. 单程平面磨削淬硬技术的理论分析和试验研究[D]. 济南:山东大学,2006. ZHANG Lei. Study on mechanism and experiment of single-pass surface grind-hardening technology[D]. Jinan:Shandong University,2006.
[4] ROWE W B,MORGAN M N,BLACK S C E. Validation of thermal properties in grinding[J]. CIRP Annals – Manufacturing Technology,1998,47(1):275-279.
[5] MALKIN S,GUO C. Thermal analysis of grinding[J]. CIRP Annals – Manufacturing Technology,2007,56(2):760-782
[6] GUO C,WU Y,VARGHESE V,et al. Temperatures and energy partition for grinding with vitrified CBN wheels[J]. CIRP Annals – Manufacturing Technology,1999,48(1):247-250.
[7] MOHAMMADJAFAR H,BANAFSHEH S. Thermal analysis of minimum quantity lubrication-MQL grinding process[J]. International Journal of Machine Tools & & Manufacture,2012,63:1-15.
[8] 谢桂芝,黄含,徐西鹏,等. 氮化硅陶瓷高效深磨温度的研究[J]. 机械工程学报,2009,45(3):109-114. XIE Guizhi,HUANG Han,XU Xipeng,et al. Study on the temperature in the high efficiency deep grinding of silicon nitride[J]. Journal of Mechanical Engineering,2009,45(3):109-114.
[9] 任敬心,华定安. 磨削原理[M]. 北京:电子工业出版社,2011. REN Jingxin,HUA Dingan. Princple of grinding[M]. Beijing:Publishing House of Electronics Industry,2011.
[10] MALKIN S,GUO C. Grinding technology:Theory and application of machining with abraives[M]. New York: Industrial Press Inc.,2008.
[11] ROWE W B,BLACK S C E,MILLS B,et al Analysis of grinding temperatures by energy partitioning[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture,1996,210(6):579-588.
[12] ROWE W B. Temperature case studies in grinding including an inclined heat source model[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture,2001,215(4):473-491.
[13] GUO Changsheng,MALKIN S. Energy partition and cooling during grinding[J]. Journal of Manufacturing Processes,2000,2(3):151-157.
[14] KIM N K,GUO C,MALKIN S. Heat flux distribution and energy partition in creep-feed grinding[J]. CIRP Annals – Manufacturing Technology,1997,46(1):227-232.
[15] GUO C,WU Y,VARGHESE V,et al. Temperatures and energy partition for grinding with vitrified CBN wheels[J]. CIRP Annals – Manufacturing Technology,1999,48(1):247-250.
[16] ROWE W B,MORGAN M N,BLACK S C E,et al. A simplified approach to control of thermal damage in grinding[J]. CIRP Annals – Manufacturing Technology,1996,45(1):299-302.
[17] QI H S,ROWE W B,MILLS B. Experimental investigation of contact behavior in grinding[J]. Tribology International,1997,30(4):283-294.
[18] 言兰,融亦鸣,姜峰. 氧化铝砂轮地貌的量化评价及数学建模[J]. 机械工程学报,2011,47(17):179-186. YAN Lan,RONG Yiming,JIANG Feng. Quantitive evaluation and modelling of alumina grinding wheel surface topography[J]. Journal of Mechanical Engineering,2011,47(17):179-186.
[19] GUO Guoqiang,LIU Zhiqiang,AN Qinglong,et al. Experimental investigation on conventional grinding of Ti-6Al-4V using SiC abrasive[J]. Interantional Journal of Advanced Manufacturing Technology,2011,57(1):135-142.
[20] DONG Dapeng,GUO Guoqiang,YU Dedong,et al. Experimental investigation on the effects of different heat treatment processes on grinding machinability and surface integrity of 9Mn2V[J]. Interantional Journal of Advanced Manufacturing Technology,2015,81(5):1165-1174.
