Journal of Mechanical Engineering >
Research on Characteristic of Test Specimen for Five-axis CNCMachine Tools
Online published: 2017-01-05
WANG Wei , TAO Wenjian , LI Qingzhao . Research on Characteristic of Test Specimen for Five-axis CNCMachine Tools[J]. Journal of Mechanical Engineering, 2017 , 53(1) : 101 -109 . DOI: 10.3901/JME.2017.01.101
[1] ANDOLFATTOA L，LAVERNHE S，MAYER J. Evaluation of servo，geometric and dynamic error sources on five-axis high-speed machine tool[J]. International Journal of Machine Tools and Manufacture，2011，51(10-11)：787-796.
[2] 粟时平，李圣怡. 基于空间误差模型的加工中心几何误差辨识方法[J]. 机械工程学报，2002，38(7)：121-122.
SU Shiping，LI Shengyi. Identification method for errors of machining center based on volumetric error model[J]. Chinese Journal of Mechanical Engineering，2002，38(7)：121-122.
[3]蔡晓华，杜正春. 五轴数控机床的运动精度诊断评述[J].机床与液压，2013(21)：149-152，85.
CAI Xiaohua，DU Zhengchun. Error motion diagnosis and review for 5-axis machine tool[J]. Machine Tool and Hydraulics，2013(21)：149-152，85.
[4] 仇健. 数控机床切削性能测试典型试件综述[J]. 制造技术与机床，2014(9)：193-203.
QIU Jian. Review on typical part for cutting test of NC machining centre[J]. Manufacturing Technology and Machine Tool，2014(9)：193-203.
[5] NAS979. Uniform cutting test-NAS series，metal cutting equipment[R]. Washigton，USA：NAS，1969.
[6] 杜丽，张信，王伟，等.“S”形试件的五轴数控机床综合动态精度检测特性研究[J]. 电子科技大学学报，2014(4)：629-635.
DU Li，ZHANG Xin，WANG Wei，et al. Research on properties of “S” shaped test piece on synthesis dynamic accuracy detection of five-axis CNC machine tools[J]. Journal of University of Electronic Science and Technology of China，2014(4)：629-635.
[7] UTSUMI K，KOSUGI T，SAITO A，et al. Measurement method of geometric accuracy of five-axis controlled machining centers[J]. Japan Society of Mechanical Engineering，2006，73(719)：2293-2298.
[8] TSUTSUMI M，YUMIZA D，UTSUMI K.Evaluation of synchronous motion in five-axis machining centers with a tilting rotary table[J].Journal of Advanced Mechanical
Design，Systems and Manufacturing，2007，1(1)：24-35.
[9] SONG Zhiyong，CUI Yawen. S-shape detection test piece and a detection method for detecting the precision of the numerical control milling machine：USA，US
[10] 施法中. 计算机辅助几何设计及非均匀有理B样条[M].北京：高等教育出版社，2001.
SHI Fazhong. CAGD & NURBS[M]. Beijing：Higher Education Press，2001.
[11] 宋玉旺. 完全掌握UG NX8.5超级手册[M]. 北京：机械工业出版社，2014.
SONG Yuwang. Grasp UG NX8.5 super manual completely[M]. Beijing：China Machine Press，2014.
[12] 梅向明，黄敬之. 微分几何[M]. 4版. 北京：高等教育出版社，2008.
MEI Xiangming，HUANG Jingzhi. Differential geometry[M]. 4 th ed. Beijing：Higher Education Press，2008.
[13] RAO V，RAO P. Effect of workpiece curvature on cutting forces and surface error in peripheral milling[J]. Proceedings of the Institution of Mechanical Engineers. Part B：Engineering Manufacture，2006，220(9)：1399-1407.
[14] ZHU Haiguang，LIU Riliang. A combined approach to tool path generation for flank milling of impeller blades with non–developable ruled surfaces[J]. International Journal of Manufacturing Research，2015，10(1)：1-16.
[15] 蔡永林，席光，查建中. 任意扭曲直纹面叶轮数控侧铣刀位计算与误差分析[J]. 西安交通大学学报，2004，38(5)：517-520.
CAI Yonglin，XI Guang，CHA Jianzhong. Calculation of cutter-location and error analysis in numerical control flank milling of twisted ruled surface impeller[J]. Journal of Xi’an Jiaotong University，2004，38(5)：517-520.
/
| 〈 |
|
〉 |