[1] SMITH D R, PADILLA W J, VIER D C, et al. Composite medium with simultaneously negative permeability and permittivity[J]. Physical Review Letters, 2000, 84(18):4184-4187.
[2] KSHETRIMAYUM R S. A brief intro to metamaterials[J]. IEEE Potentials, 2005, 23(5):44-46.
[3] SHELBY R A, SMITH D R, NEMATNASSER S C, et al. Microwave transmission through a two-dimensional, isotropic, left-handed metamaterial[J]. Applied Physics Letters, 2001, 78(4):489-491.
[4] LIU Ruopeng, JI Chunlin, MOCK J J, et al. Broadband ground-plane cloak[J]. Science, 2009, 323(5912):366-369.
[5] YABLONOVITCH E, GMITTER T J, LEUNG K M. Photonic band structure:The face-centered-cubic case employing nonspherical atoms[J]. Physical Review Letters, 1991, 67(17):2295-2298.
[6] KHORASANINEJAD M, CHEN Weiting, DEVLIN R C, et al. Metalenses at visible wavelengths:Diffractionlimited focusing and subwavelength resolution imaging[J]. Science, 2016, 352(6290):1190-1194.
[7] 吴九汇,马富银,张思文,等. 声学超材料在低频减振降噪中的应用评述[J]. 机械工程学报, 2016, 52(13):68-78. WU Jiuhui, MA Fuyin, ZHANG Siwen, et al. Application of acoustic metamaterials in low-frequency vibration and noise reduction[J]. Journal of Mechanical Engineering, 2016, 52(13):68-78.
[8] LIU Zhengyou, ZHANG Xixiang, MAO Yiwei, et al. Locally resonant sonic materials[J]. Science, 2000, 289(5485):1734-1736.
[9] ZIGONEANU L, POPA B, CUMMER S A. Three-dimensional broadband omnidirectional acoustic ground cloak[J]. Nature Materials, 2014, 13(4):352-355.
[10] FAN C Z, GAO Y, HUANG J P. Shaped graded materials with an apparent negative thermal conductivity[J]. Applied Physics Letters, 2008, 92(25):251907.
[11] LI Jixi, GAO Yutang, HUANG J P. A bifunctional cloak using transformation media[J]. Journal of Applied Physics, 2010, 108(7):74504.
[12] NARAYANA S, SATO Y. Heat flux manipulation with engineered thermal materials[J]. Physical Review Letters, 2012, 108(21):214303.
[13] YU Xianglong, ZHOU Ji, LIANG Haiyi, et al. Mechanical metamaterials associated with stiffness, rigidity and compressibility:A brief review[J]. Progress in Materials Science, 2017, 94:114-173.
[14] BÜCKMANN T, THIEL M, KADIC M, et al. An elasto-mechanical unfeelability cloak made of pentamode metamaterials[J]. Nature Communications, 2014, 5:4130.
[15] SOKOLNIKOFF I S. Mathematical theory of elasticity[M]. Malabar:Krieger Publishing Company, 1983.
[16] AEH L. A Treatise on the mathematical theory of elasticity[M]. New York:Cambridge University Press, 1927.
[17] GUNTON D J, SAUNDERS G A. The Young's modulus and Poisson's ratio of arsenic, antimony and bismuth[J]. Journal of Materials Science, 1972, 7(9):1061-1068.
[18] LAKES R. Foam structures with a negative Poisson's ratio[J]. Science, 1987, 235(4792):1038-1040.
[19] CADDOCK B D, EVANS K E. Microporous materials with negative Poisson's ratios. I. Microstructure and mechanical properties[J]. Journal of Physics D:Applied Physics, 1989, 22(12):1877-1882.
[20] EVANS K E, CADDOCK B D. Microporous materials with negative Poisson's ratios. Ⅱ. Mechanisms and interpretation[J]. Journal of Physics D:Applied Physics, 1989, 22(12):1883-1887.
[21] MAY P R, FUSTER J M, HABER J, et al. Woodpecker drilling behavior. An endorsement of the rotational theory of impact brain injury[J]. Arch Neurol, 1979, 36(6):370-373.
[22] GIBSON L J, ASHBY M F. Cellular solids:Structure and properties[M]. New York:Cambridge University Press, 1997.
[23] ALMGREN R. An isotropic three-dimensional structure with Poisson's ratio=-1[J]. Journal of Elasticity, 1985, 15(4):427-430.
[24] LARSEN U D, SIGNUNG O, BOUWSTA S. Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio[J]. Journal of Microelectromechanical Systems, 1996, 6(2):99-106.
[25] GRIMA J N, GATT R, ALDERSON A, et al. On the potential of connected stars as auxetic systems[J]. Molecular Simulation, 2005, 31(13):925-935.
[26] KÖRNER C, LIEBOLDRIBEIRO Y. A systematic approach to identify cellular auxetic materials[J]. Smart Materials and Structures, 2015, 24(2):25013.
[27] WARMUTH F, OSMANLIC F, ADLER L, et al. Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting[J]. Smart Materials and Structures, 2017, 26(2):25013.
[28] SHOKRI Rad M, PRAWOTO Y, AHMAD Z. Analytical solution and finite element approach to the 3D re-entrant structures of auxetic materials[J]. Mechanics of Materials, 2014, 74:76-87.
[29] HENGSBACH S, LANTADA A D. Direct laser writing of auxetic structures:Present capabilities and challenges[J]. Smart Materials and Structures, 2014, 23(8):85033.
[30] MA Zhengdong. Three-dimensional auxetic structures and applications thereof:US, US7910193B2[P]. 2011-03-22.
[31] GRIMA J N, EVANS K E. Auxetic behavior from rotating squares[J]. Journal of Materials Science Letters, 2000, 19(17):1563-1565.
[32] GRIMA J N, FARRUGIA P, GATT R, et al. On the auxetic properties of rotating rhombi and parallelograms:A preliminary investigation[J]. Physica Status Solidi (b), 2008, 245(3):521-529.
[33] GRIMA J N, EVANS K E. Auxetic behavior from rotating triangles[J]. Journal of Materials Science, 2006, 41(10):3193-3196.
[34] EVANS K E, ALDERSON A. Rotation and dilation deformation mechanisms for auxetic behaviour in the α-cristobalite tetrahedral framework structure[J]. Physics and Chemistry of Minerals, 2001, 28(10):711-718.
[35] LAKES R. Deformation mechanisms in negative Poisson's ratio materials:Structural aspects[J]. Journal of Materials Science, 1991, 26(9):2287-2292.
[36] ALDERSON A, ALDERSON K L, ATTARD D, et al. Elastic constants of 3-, 4-and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading[J]. Composites Science and Technology, 2010, 70(7):1042-1048.
[37] ELIPE J C, LANTADA A. Comparative study of auxetic geometries by means of computer-aided design and engineering[J]. Smart Materials and Structures, 2012, 21(10):105004.
[38] GRIMA J N, GATT R, FARRUGIA P. On the properties of auxetic meta-tetrachiral structures[J]. Physica Status Solidi (b), 2008, 245(3):511-520.
[39] DIRRENBERGER J, FOREST S, JEULIN D. Effective elastic properties of auxetic microstructures:Anisotropy and structural applications[J]. International Journal of Mechanics and Materials in Design, 2013, 9(1):21-33.
[40] HA C S, PLESHA M E, LAKES R S. Chiral three-dimensional isotropic lattices with negative Poisson's ratio[J]. Physica Status Solidi (b), 2016, 253(7):1243-1251.
[41] WU Lingling, LI Bo, ZHOU Ji. Isotropic negative thermal expansion metamaterials[J]. ACS Applied Materials & Interfaces, 2016, 8(27):17721-17727.
[42] FU Minghui, ZHENG Binbin, LI Weihua. A novel chiral three-dimensional material with negative Poisson's ratio and the equivalent elastic parameters[J]. Composite Structures, 2017, 176:442-448.
[43] ALDERSON A, EVANS K E. Modelling concurrent deformation mechanisms in auxetic microporous polymers[J]. Journal of Materials Science, 1997, 32(11):2797-2809.
[44] GRIMA J N, GATT R. Perforated sheets exhibiting negative Poisson's ratios[J]. Advanced Engineering Materials, 2010, 12(6):460-464.
[45] MIZZI L, AZZOPARDI K M, ATTARD D, et al. Auxetic metamaterials exhibiting giant negative Poisson's ratios[J]. Physica Status Solidi-rapid Research Letters, 2015, 9(7):425-430.
[46] GRIMA J N, GAT R, ELLUL B, et al. Auxetic behaviour in non-crystalline materials having star or triangular shaped perforations[J]. Journal of Non-Crystalline Solids, 2010, 356(37-40):1980-1987.
[47] TAYLOR M, FRANCESCONI L, GERENDAS M, et al. Low porosity metallic periodic structures with negative Poisson's ratio[J]. Advanced Materials, 2014, 26(15):2365-2370.
[48] OVERVELDE J T, SHAN S, BERTOLDI K. Compaction through buckling in 2D periodic, soft and porous structures:Effect of pore shape[J]. Advanced Materials, 2012, 24(17):2337-2342.
[49] RAVIRALA N, ALDERSON A, ALDERSON K L. Interlocking hexagons model for auxetic behaviour[J]. Journal of Materials Science, 2007, 42(17):7433-7445.
[50] SMITH C W, GRIMA J N, EVANS K E. A novel mechanism for generating auxetic behaviour in reticulated foams:Missing rib foam model[J]. Acta Materialia, 2000, 48(17):4349-4356.
[51] GASPAR N, REN X, SMITH C, et al. Novel honeycombs with auxetic behaviour[J]. Acta Materialia, 2005, 53(8):2439-2445.
[52] GRIMA J N, WILLIAMS J J, EVANS K E. Networked calix[4] arene polymers with unusual mechanical properties[J]. Chemical Communications, 2005(32):4065.
[53] GRIMA J N, WINCZEWSKI S, MIZZI L, et al. Tailoring graphene to achieve negative Poisson's ratio Properties[J]. Advanced Materials, 2015, 27(8):1455-1459.
[54] BOUAZIZ O, MASSE J P, ALLAIN S, et al. Compression of crumpled aluminum thin foils and comparison with other cellular materials[J]. Materials Science and Engineering:A, 2013, 570:1-7.
[55] RODNEY D, GADOT B, MARTINEZ O R, et al. Reversible dilatancy in entangled single-wire materials[J]. Nature Materials, 2015, 15(1):72-77.
[56] VOCKE R D, KOTHERA C S, WOODS B K S, et al. Development and testing of a span-extending morphing wing[J]. Journal of Intelligent Material Systems and Structures, 2011, 22(9):879-890.
[57] JONES O. Cushioned earphones:US, US6412593B1[P]. 2002-06-02.
[58] TAKENAKA K. Negative thermal expansion materials:Technological key for control of thermal expansion[J]. Science and Technology of Advanced Materials, 2016, 13(1):13001.
[59] CRIBB J L. Shrinkage and thermal expansion of a two phase material[J]. Nature, 1968, 220:576-577.
[60] HAMMONDS K D, DOVE M T, GIDDY A P, et al. Rigid-unit phonon modes and structural phase transitions in framework silicates[J]. American Mineralogist, 1996, 81(9):1057-1079.
[61] LAKES R. Cellular solid structures with unbounded thermal expansion[J]. Journal of Materials Science Letters, 1996, 15(6):475-477.
[62] HA C S, HESTEKIN E, LI J, et al. Controllable thermal expansion of large magnitude in chiral negative Poisson's ratio lattices[J]. Physica Status Solidi (b), 2015, 252(7):1431-1434.
[63] QU Jingyuan, KADIC M, NABER A, et al. Micro-structured two-component 3D metamaterials with negative thermal-expansion coefficient from positive constituents[J]. Scientific Reports, 2017, 7:40643.
[64] SIGMUND O, TORQUATO S. Composites with extremal thermal expansion coefficients[J]. Applied Physics Letters, 1996, 69(21):3203.
[65] CHEN B C, SILVA E C, KIKUCHI N. Advances in computational design and optimization with application to MEMS[J]. International Journal for Numerical Methods in Engineering, 2001, 52(12):23-62.
[66] QI J, HALLORAN J W. Negative thermal expansion artificial material from iron-nickel alloys by oxide co-extrusion with reductive sintering[J]. Journal of Materials Science, 2004, 39(13):4113-4118.
[67] TAKEZAWA A, KOBASHI M, KITAMURA M. Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing[J]. APL Materials, 2015, 3(7):76103.
[68] TAKEZAWA A, KOBASHI M. Design methodology for porous composites with tunable thermal expansion produced by multi-material topology optimization and additive manufacturing[J]. Composites Part B:Engineering, 2017, 131:21-29.
[69] JEFFERSON G, PARTHASARATHY T A, KERANS R J. Tailorable thermal expansion hybrid structures[J]. International Journal of Solids and Structures, 2009, 46(11-12):2372-2387.
[70] LIM T. Anisotropic and negative thermal expansion behavior in a cellular microstructure[J]. Journal of Materials Science, 2005, 40(12):3275-3277.
[71] STEEVE C A, LUCATO S L, HE M, et al. Concepts for structurally robust materials that combine low thermal expansion with high stiffness[J]. Journal of the Mechanics and Physics of Solids, 2007, 55(9):1803-1822.
[72] STEEVES C A, MMERCER C, ANTINUCCI E, et al. Experimental investigation of the thermal properties of tailored expansion lattices[J]. International Journal of Mechanics and Materials in Design, 2009, 5(2):195-202.
[73] YAMAMOTO N, GDOUTOS E, TODA R, et al. Thin films with ultra-low thermal expansion[J]. Advanced Materials, 2014, 26(19):3076-3080.
[74] WEI Kai, CHEN Haosen, PEI Yongmao, et al. Planar lattices with tailorable coefficient of thermal expansion and high stiffness based on dual-material triangle unit[J]. Journal of the Mechanics and Physics of Solids, 2016, 86:173-191.
[75] HOPKINS J B, SONG Y, LEE H, et al. Polytope sector-based synthesis and analysis of microstructural architectures with tunable thermal conductivity and expansion[J]. Journal of Mechanical Design, 2016, 138(5):51401.
[76] WANG Qingming, JACKSON J A, GE Qi, et al. Lightweight mechanical metamaterials with tunable negative thermal expansion[J]. Physical Review Letters, 2016, 117(17).
[77] KUSHWAHA M S, HALEVI P, DOBRZYNSKI L, et al. Acoustic band structure of periodic elastic composites[J]. Physical Review Letters, 1993, 71(13):2022-2025.
[78] SCARPA F, TOMLINSON G. Theoretical characteristics of the vibration of sandwich plates with in-plane negative Poisson's ratio values[J]. Journal of Sound and Vibration, 2000, 230(1):45-67.
[79] RUZZENE M, SCARPA F. Control of wave propagation in sandwich beams with auxetic core[J]. Journal of Intelligent Material Systems and Structures, 2003, 14(7):443-453.
[80] RUZZENE M, SCARPA F, SORANNA F. Wave beaming effects in two-dimensional cellular structures[J]. Smart Materials and Structures, 2003, 12(3):363-372.
[81] RUZZENE M. Vibration and sound radiation of sandwich beams with honeycomb truss core[J]. Journal of Sound and Vibration, 2004, 277(4-5):741-763.
[82] GONELLA S, RUZZENE M. Analysis of in-plane wave propagation in hexagonal and re-entrant lattices[J]. Journal of Sound and Vibration, 2008, 312(1-2):125-139.
[83] 黄毓,刘书田. 二维格栅材料带隙特性分析与设计[J]. 力学学报, 2011, 43(2):316-329. HUANG Yu, LIU Shutian. Analysis and design of two dimensional lattice materials with band-gap characteristics[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(2):316-329.
[84] MENG Junmiao, DENG Zichen, ZHANG Kai, et al. Band gap analysis of star-shaped honeycombs with varied Poisson's ratio[J]. Smart Materials and Structures, 2015, 24(9):95011.
[85] KRÖDEL S, DELPERO T, BERGAMINI A, et al. 3D auxetic microlattices with independently controllable acoustic band gaps and quasi-static elastic moduli[J]. Advanced Engineering Materials, 2014, 16(4):357-363.
[86] WARMUTH F, KRÖDEL C. Phononic band gaps in 2D quadratic and 3D cubic cellular structures[J]. Materials, 2015, 8(12):8327-8337.
[87] SPADONI A, RUZZENE M. Structural and acoustic behavior of chiral truss-core beams[J]. Journal of Vibration and Acoustics, 2006, 128(5):616.
[88] 徐时吟,黄修长,华宏星. 六韧带手性结构的能带特性[J]. 上海交通大学学报, 2013, 47(2):167-172. XU Shiyin, HUANG Xiuchang, HUA Hongxing. Study on the band structure of hexagonal chiral Structures[J]. Journal of Shanghai Jiaotong University, 2013, 47(2):167-172.
[89] DONG Haowen, WANG Yuesheng, WANG Yuefeng, et al. Reducing symmetry in topology optimization of two-dimensional porous phononic crystals[J]. AIP Advances, 2015, 5(11):117149.
[90] 严珠妹. 含手性谐振单元声子晶体的带隙和传输特性研究[D]. 北京:北京交通大学, 2016. YAN Zhumei. Bandgap and propagation properties of phononic crystals with chirally resonant units[D]. Beijing:Beijing Jiaotong University, 2016.
[91] BILLON K, ZAMPETAKIS I, SCARPA F, et al. Mechanics and band gaps in hierarchical auxetic rectangular perforated composite metamaterials[J]. Composite Structures, 2017, 160:1042-1050.
[92] 于靖军,郝广波,陈贵敏,等. 柔性机构及其应用研究进展[J]. 机械工程学报, 2015, 51(13):53-68. YU Jingjun, HAO Guangbo, CHEN Guimin, et al. State-of-arts of compliant mechanisms and their applicaitons[J]. Journal of Mechanical Engineering,2015, 51(13):53-68.
[93] FAN Xiqiu, ZHANG Honghai, WANG Xuefeng, et al. Nanoimprint lithography technology with automatic alignment[J]. Chinese Journal of Mechanical Engineering, 2007, 20(3):1-5.
