The cutting force coefficient changes with the cutting parameters during cutting process. If the cutting force coefficient is assumed to be constant during the cutting force simulation and the stability boundary drawing process, which makes the prediction error larger. In view of the above-mentioned problems, 0Cr13 stainless steel which is the processing material of the impact bucket, is taken as the research object. On the basis of the milling force model, the dynamic cutting force coefficient model with the cutting parameters is obtained by orthogonal test, average milling force method and partial least squares method. The main factors that affect the cutting force coefficient Kt, Kr and Ka are the feed rate, the radial width and the feed rate. Based on the dynamic cutting force coefficient, the cutting force and stability of the milling process are studied. Cutting force simulation and stability boundary, which are obtained by using constant cutting force coefficient and dynamic cutting force coefficient, compared with cutting test, the simulation results show that the dynamic cutting force coefficients is more close to the actual processing results, to provide theoretical support for the optimization of Pelton turbine bucket plunge milling process.
YUE Caixu
,
GAO Haining
,
LIU Xianli
. Research on the Stability of the Machining Process Based on the Dynamic Cutting Force Coefficient[J]. Journal of Mechanical Engineering, 2017
, 53(17)
: 193
-201
.
DOI: 10.3901/JME.2017.17.193
[1] HUANG Jiuchao, LIU Xianli, YUE Caixu, et al. Tool path planning of 5-axis finishing milling machining for closed blisk[J]. Materials Science Forum, 2012, 723:153-158.
[2] AL-AHMAD M, D'ACUNTO A, MARTIN P. Prediction cutting forces system in plunge milling operations[J]. Fifth international conference on High Speed Machining, 2006, 29:385-396.
[3] WAKAOKA S, YAMANE Y, SEKIYA K, et al. High-speed and high-accuracy plunge cutting for vertical walls[J]. Journal of Materials Processing Technology, 2002, 127(2):246-250.
[4] LI Y, LIANG S Y, PETROF R C, et al. Force modelling for cylindrical plunge cutting[J]. The International Journal of Advanced Manufacturing Technology, 2000, 16(12):863-870.
[5] WU Shi, YANG LIN, LIU Xianli, et al. Effects of curvature characteristics of sculptured surface on chatter stability for die milling[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(9):2649-2662.
[6] MAMEDOV A, LAZOGLU I. Machining forces and tool deflections in micro milling[J]. Procedia CIRP, 2013, 8:147-151.
[7] SCIPPA A, GROSSI N, CAMPATELLI G. Milled surface generation model for chip thickness detection in peripheral milling[J]. Procedia CIRP, 2013, 8:450-455.
[8] 魏兆成,王敏杰,蔡玉俊,等. 球头铣刀三维曲面加工的铣削力预报[J]. 机械工程学报, 2013, 49(1):178-184. WEI Zhaocheng, WANG Minjie, CAI Yujun, et al. Milling force prediction for ball-end milling of 3D curved surfaces[J]. Journal of Mechanical Engineering, 2013, 49(1):178-184.
[9] YUE Caixu, HUANG Cui, LIU Xianli, et al. 3D FEM Simulation of Milling Force in Corner Machining Process[J]. Chinese Journal of Mechanical Engineering, 2017, 30(2):286-293.
[10] LIU Xianli, LI Rongyi, WU Shi, et al. A prediction method of milling chatter stability for complex surface mold[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89:2637-2648.
[11] BUDAK E, ALTINTAS Y, ARMAREGO E J A. Prediction of milling force coefficients from orthogonal cutting data[J]. Journal of Manufacturing Science and Engineering, 1996, 118(2):216-224.
[12] WANG J J, ZHENG C M. Identification of shearing and ploughing cutting constants from average forces in ball-end milling[J]. International Journal of Machine Tools and Manufacture, 2002, 42(6):695-705.
[13] GONZALO O, BERISTAIN J, JAUREGI H, et al. A method for the identification of the specific force coefficients for mechanistic milling simulation[J]. International Journal of Machine Tools and Manufacture, 2010, 50(9):765-774.
[14] ALTINTAS Y, BER A A. Manufacturing automation:Metal cutting mechanics, machine tool vibrations, and CNC design[J]. Applied Mechanics Reviews, 2001, 54(2):84.
[15] YAO Zhenqiang, LIANG Xinguang, LUO Lei, et al. A chatter free calibration method for determining cutter runout and cutting force coefficients in ball-end milling[J]. Journal of Materials Processing Technology, 2013, 213(9):1575-1587.
[16] GROSSI N, SALLESE L,SCIPPA A,et al. Speed-varying cutting force coefficient identification in milling[J]. Precision Engineering, 2015, 42:321-334.
[17] RUBEO M A, SCHMITZ T L. Mechanistic force model coefficients:A comparison of linear regression and nonlinear optimization[J]. Precision Engineering, 2016, 45:311-321.
[18] CAMPATELLI G, SCIPPA A. Prediction of milling cutting force coefficients for Aluminum 6082-T4[J]. Procedia CIRP, 2012, 1:563-568.
[19] SALGUERO J, BATISTA M, CALAMAZ M, et al. Cutting forces parametric model for the dry high speed contour milling of aerospace aluminium alloys[J]. Procedia Engineering, 2013, 63:735-742.
[20] WANG Minghai, GAO Lei, ZHENG Yaohui. An examination of the fundamental mechanics of cutting force coefficients[J]. International Journal of Machine Tools and Manufacture, 2014, 78:1-7.
[21] RAFANELLI F, CAMPATELLIG, SCIPPA A. Effects of cutting conditions on forces and force coefficients in plunge milling operations[J]. Advances in Mechanical Engineering, 2015, 7(6):1-9.
