The magnetic coupler has many advantages, such as high efficiency and reliable transmission. It is widely used in the field of coal machine equipment transmission. However, the heat resistance of the key components of the coupler is poor, which affects the life of the coupler. It is necessary to study the temperature field of the coupler. Specific to the few study on thermal fact of the mining assisted cooling high-power magnetic couplings, a new method, calculating the heat transfer coefficient based on the fluid-solid coupling velocity field, is proposed, which is different from the traditional method plugging rotating speed into the empirical formula. The numerical simulation of the three-dimensional temperature field is conducted, thus getting the temperature field distribution of the coupling which can be applicable to the heat transfer surface of different couplings. The 160 kW coupling is taken as an example for experimental verification, thus analyzing the temperature change law of the coupling at different positions and with different input torques. As time goes on, the temperature increases first and then stabilizes. When it is stable, it reaches the state of thermal equilibrium. When the input torque increases, the temperature rises and the stable temperature increases correspondingly. The torque increases at 10Nm, and the final stable temperature increases by 15 degrees. Finally, through the comparative analysis of the numerical simulation data and the experimental data, the error is 2%-3%. The correction of the proposed method is verified, which is of great importance for the temperature protection design and cooling structure optimization of the coupling control system.
WANG Lei
,
JIA Zhenyuan
,
ZHU Yuqin
,
LIU Hao
,
ZHANG Li
. Temperature Field of Mining Assisted Cooling High-power Magnetic Couplings[J]. Journal of Mechanical Engineering, 2018
, 54(18)
: 187
-193
.
DOI: 10.3901/JME.2018.18.187
[1] NAGRIAL,H.MAHMOOD. Analysis,design and performance of magnetic couplings[J]. Proceedings of the International Conference on Power Electronics and Drive Systems. 1995,42(5):87-91.
[2] 何富君,仲于海,张瑞杰,等. 永磁涡流耦合传动特性研究[J]. 机械工程学报,2016,52(8):23-28. HE Fujun,ZHONG Yuhai,ZHANG Ruijie,et al. Research on characteristics of permanent magnet eddy-current coupling drive[J]. Journal of Mechanical Engineering,2016,52(8):23-28.
[3] 刘俊亭. 磁力偶合式传动产生涡流热损耗输出功率的研究[J]. 石油和化工设备,2005(6):32-36. LIU Junting. Study on output power of eddy current heat loss generated by magnetic coupling transmission[J]. Petroleum & chemical equipment,2005(6):32-36.
[4] 乐天喜. 永磁磁力偶合器性能研究[D]. 大连:大连海事大学,2012. LE Tianxi. Study on the performance of permanent magnet coupler[D]. Dalian:Dalian Maritime University,2012.
[5] 张泽东. 永磁磁力偶合器设计与关键技术研究[D]. 沈阳:沈阳工业大学,2012. ZHANG Zedong. Design and key technology research of permanent magnet coupling[D]. Shenyang:Shenyang University of Technology,2012.
[6] 张宏刚. 永磁磁力偶合器损耗的计算与分析[D]. 长春:吉林大学,2008. ZHANG Honggang. The calculation and analysis of permanent magnetic coupling loss[D]. Changchun:Jilin University,2008.
[7] LIM C H,AIROLDI G,DOMINY R G,et al. Experimental validation of CFD modelling for heat transfer coefficient predictions in axial flux permanent magnet generators[J]. International Journal of Thermal Sciences,2011(1250):2451-2463.
[8] 牛耀宏. 矿用永磁磁力偶合器设计理论及实验研究[D].北京:中国矿业大学,2014. NIU Yaohong. Mine permanent magnet coupler design theory and experimental research[D]. Beijing:China Mining University,2014.
[9] ZHOU N,LIU K. A tunable high-static-low-dynamic stiffness vibration isolator[J]. Journal of Sound and Vibration,2010,329(9):1254-1273.
[10] 杨超君,孔令营,张涛,等. 调磁式异步磁力联轴器三维气隙磁场研究[J]. 机械工程学报,2016,52(8):8-15. YANG Chaoqun,KONG Lingying,ZHANG Tao,et al. Research on 3D air-gap magnetic field of field modulated asynchronous magnetic couplings[J]. Journal of Mechanical Engineering,2016,52(8):8-15.
[11] 林岩.钕铁硼永磁电机防高温失磁技术的研究[D]. 沈阳:沈阳工业大学,2006. LIN Yan. Study on the technology of high temperature magnetic loss reduction of NdFeB permanent magnet motor[D]. Shenyang:Shenyang University of Technology,2006
[12] KREJCI P,ONDRUSEK C. Design optimization of magnetic coupling using genetic algorithm and 2D FEM model[J]. Fracture Methodologies and Manufacturing Processes,2004,61(2):389-393
[13] 庄艳. 永磁伺服电动机电磁场与温度场偶合计算及冷却系统设计[D]. 沈阳:沈阳工业大学,2010. ZHUANG Yan. Coupling calculation of electromagnetic field and temperature field of permanent magnet servo motor and design of cooling system[D]. Shenyang:Shenyang University of Technology,2010.
[14] MIAO Enming,LIU Yi,XU Jianguo,et al. Thermal error modeling method with the jamming of temperature-sensitive points' volatility on CNC machine tools[J]. Chinese Journal of Mechanical Engineering,2017,30(3):566-577.
[15] 杨菲. 永磁电机温升计算及冷却系统设计[D]. 沈阳:沈阳工业大学,2007. YANG Fei. Temperature rise calculation and cooling system design of permanent magnet motor[D]. Shenyang:Shenyang University of Technology,2007.
