To reduce the near surface dead zone in time of flight diffraction(TOFD), one method is proposed based on mode-converted theory. According to the variation of mode-converted waves in parallel scanning of TOFD, the theoretical relationship between flaw depth d and offset distance △S is confirmed. Considering the reading error of △S, the vertical distance d' between lateral wave and mode-converted wave having a shortest ultrasonic path is introduced to achieve the reduction of near surface dead zone. Selecting a pair of TOFD probes with 10 MHz center frequency, 70° refraction angle and 17.00 mm Probe center spacing(PCS), surface breaking notches at bottom, whose depths are from 1.00 mm to 6.00 mm in carbon steel, are inspected in parallel way and located by simulation and experiment. The result shows that near surface dead zone can be suppressed to 1.00 mm, and the biggest absolute located error is 0.24 mm when the notch depth is 2.00 mm.
DING Ning
,
JIN Shijie
,
ZHANG Donghui
,
KANG Da
,
ZHANG Shuxiao
,
LEI Mingkai
,
LIU Lili
,
LIN Li
. Research on Near Surface Dead Zone Reduction of TOFD Based on Mode-converted Theory[J]. Journal of Mechanical Engineering, 2017
, 53(16)
: 120
-124
.
DOI: 10.3901/JME.2017.16.120
[1] 盛朝阳,刚铁,迟大钊. 基于分水岭方法的超声TOFD检测图像分割[J].机械工程学报, 2011, 47(8):35-40. SHENG Chaoyang, GANG Tie, CHI Dazhao. Segmentation of ultrasonic TOFD testing image based on watershed method[J]. Journal of Mechanical Engineering, 2011, 47(8):35-40.
[2] 谢雪,祝美丽,杨会敏,等. 合成孔径聚焦技术在超声衍射时差法缺陷长度定量中的应用研究[J].机械工程学报, 2015, 51(18):20-25. XIE Xue, ZHU Meili, YANG Huimin, et al. Research of synthetic aperture focusing technology in the application of crack length sizing by time of flight diffraction techinique[J]. Journal of Mechanical Engineering, 2015, 51(18):20-25.
[3] MERAZI M, BOUDRAA M, BOUDRAA B. Mathematical morphology for TOFD image analysis and automatic crack detection[J]. Ultrasonics, 2014, 54(6):1642-1648.
[4] BASKARAN G, BALASUBRAMANIAM K, KRISHNAMURTHY C, et al. Ultrasonic TOFD flaw sizing and imaging in thin plates using embedded signal identification technique(ESIT)[J]. Insight Non-Destru ctive Testing and Condition Monitoring, 2004, 46(9):1-6.
[5] 张树潇,谢雪,刘丽丽,等. 基于频谱分析原理减小TOFD检测近表面盲区的方法[J]. 无损探伤, 2013, 37(6):20-22. ZHANG Shuxiao, XIE Xue, LIU Lili, et al. Decreasing near surface dead zone of TOFD method based on spectral analysis[J]. Nondestructive Test, 2013, 37(6):20-22.
[6] 白艳, 邢涛. TOFD技术检测盲区的研究[J]. 森林工程, 2010, 26(4):50-53. BAI Yan, XING Tao. Research on TOFD technology to detect the blind zone[J]. Forest Engineering, 2010, 26(4):50-53.
[7] 谢雪. 提高压力容器焊缝TOFD检测分辨率方法的研究[D]. 大连:大连理工大学, 2015. XIE Xue. Research of improving TOFD resolution based on pressure vessel welds[D]. Dalian:Dalian University of Technology, 2015.
[8] 陈天璐, 阙沛文. 基于超声衍射反射回波渡越时间的缺陷识别技术[J]. 化工自动化及仪表, 2006, 33(4):50-52. CHEN Tianlu, QUE Peiwen. The technology of recognizing defect based on ultrasonic time of flight diffraction[J]. Control and Instruments in Chemical Industry, 2006, 33(4):50-52.
[9] CHI D, GANG T. Shallow buried defect testing method based on ultrasonic TOFD[J]. Journal of Nondestructive Evaluation, 2013, 32(2):164-171.
[10] BASKARAN G, BALASUBRAMANIAM K, LASKHMAN RAO C. Shear-wave time of flight diffraction(S-TOFD) technique[J]. NDT & E International, 2006, 39(6):458-467.
[11] 林乃昌. 基于变型波的超声TOFD近表面检测新方法[J].机电工程, 2013, 30(8):967-970. LIN Naichang. New near surface detection method of ultrasonic TOFD based on transformed wave[J]. Journal of Mechanical & Electrical Engineering, 2013, 30(8):967-970.
[12] KECHIDA A, DRAI R, BENAMMAR A. Image processing and wavelets transform for sizing of weld defects using ultrasonic TOFD images[J]. Journal of the Acoustical Society of America, 2008, 123(5):1079-1084.
[13] 强天鹏,肖雄,李智军,等. TOFD技术的检测盲区计算和分析[J]. 无损检测, 2008, 30(10):738-740. QIANG Tianpeng, XIAO Xiong, LI Zhijun, et al. Calculation for the blind zone of TOFD testing technology and its characteristic analysis[J]. Nondestructive Testing, 2008, 30(10):738-740.
[14] 孙忠波,郑红霞,张平. TOFD检测中借助变型波确定缺陷偏心距及缺陷精确深度的探讨[J]. 无损检测, 2010, 32(7):500-503. SUN Zhongbo, ZHENG Hongxia, ZHANG Ping. The disscussion on defining the eccentricity and accurate depth of defect by TOFD transformed wave[J]. Nondestructive Testing, 2010, 32(7):500-503.
[15] 史亦韦. 超声检测[D]. 北京:机械工业出版社, 2005. SHI Yiwei. Ultrasonic testing[D]. Beijing:China Machine Press, 2005.
