Based on infrared thermograph technique, the characteristics of 5A90 temperature field are studied in laser welding with different shielding gases, and some relevant conclusions are obtained:At different welding speeds, the shielding gas has great influence on the temperature field characteristics and the evolution law of 5A90 in laser welding, and the influence law is slightly different.In general, when helium(He) is used as the shielding gas, the keyhole and the molten pool are more stable, and the keyhole center and back temperature is lower. At different laser power, the temperature field distribution on face of weld is almost not affected when He is used as the shielding gas. However, it has a significant difference when argon(Ar) is used as the shielding gas. For example, the mean temperature of the characteristics of the keyhole center increases by 158℃. In addition, the molten pool length exists large difference between helium and argon as the shielding gas. The results show that the effect of these two gases is different in the absorption of laser energy and the flow of molten pool. Moreover, it is also indicated that the thermal process of the welding joint is slightly different, even if the heat input is same under different laser power and welding speed.
DUAN Aiqin
,
GONG Shuili
,
LIU Fei
. Influence of Shielding Gas on Temperature Field Distribution during Laser Welding of 5A90[J]. Journal of Mechanical Engineering, 2017
, 53(16)
: 181
-189
.
DOI: 10.3901/JME.2017.16.181
[1] 张心怡,肖荣诗. 高强铝锂合金激光焊接研究进展[J]. 北京工业大学学报, 2014(10):1441-1446. ZHANG Xinyi, XIAO Rongshi. Progress in laser beam welding of high-strength aluminum-lithium alloys[J]. Journal of Beijing University of Technology, 2014(10):1441-1446.
[2] 许飞,杨璟,巩水利,等. 焊接参数对铝合金激光填丝焊缝成形的影响[J]. 材料工程, 2010(9):45-48. XU Fei, YANG Jing, GONG Shuili, et al.Effects of welding parameters on laser welding of aluminum alloys with filler wire[J]. Journal of Materials Engineering, 2010(9):45-48.
[3] 许飞,陈俐,巩水利,等. 铝锂合金激光填丝焊接接头组织性能研究[J]. 稀有金属材料与工程, 2011(10):1775-1779. XU Fei, CHEN Li, GONG Shuili, et al. Microstructure and mechanical properties of Al-Li alloy by laser welding with filler wire[J]. Rare Metal Materials and Engineering, 2011(10):1775-1779.
[4] 巴瑞章,巩水利. 5A90铝锂合金激光焊接力学性能[C/CD]//2005年中国机械工程学会年会论文集, 2005. BA Ruizhang, GONG Shuili. Mechanical properties of 5A90 alloy by laser welding[C/CD]//Proceedings of the 2005 China Mechanical Engineering Society Annual Meeting, 2005.
[5] 崔丽,李晓延,贺定勇,等. 5A90铝锂合金激光焊焊缝微观组织特征[J]. 焊接学报, 2010(9):77-80, 84,117. CUI Li, LI Xiaoyan, HE Dingyong, et al. Microstructure investigation of Nd:YAG laser welded 5A90 aluminiumlithium alloys[J]. Transactions of the China Welding Institution, 2010(9):77-80, 84, 117.
[6] 崔丽,李晓延,贺定勇,等. 5A90铝锂合金Nd:YAG激光焊缝组织的晶粒形态与晶粒取向[J]. 稀有金属材料与工程, 2013(10):2112-2116. CUI Li, LI Xiaoyan, HE Dingyong, et al. Grain shapes and grain orientations in laser welds of 5A90 Al-Li alloys[J]. Rare Metal Materials and Engineering, 2013(10):2112-2116.
[7] 王小博,杨立军,石文玲,等. 6061铝合金薄板低功率活性Nd:YAG激光焊的作用机理[J]. 机械工程学报, 2013, 49(4):37-43. WANG Xiaobo, YANG Lijun, SHI Wenling, et al. Acting mechanism of active YAG laser welding of 6061 aluminum alloy plate with lower power[J]. Journal of Mechanical Engineering, 2013, 49(4):37-43.
[8] 张维明, 武传松, 秦国梁, 等. 铝合金激光+脉冲GMAW复合焊焊缝成形的预测[J]. 机械工程学报, 2013, 49(10):110-115. ZHANG Weiming, WU Chuansong, QIN Guoliang, et al. Prediction of weld shape and size for laser+GMAW-phybrid welding of aluminium alloys[J]. Journal of Mechanical Engineering, 2013, 49(10):110-115.
[9] 段爱琴,陈俐,国莉. YAG激光焊接5A90铝锂合金金属蒸汽/等离子体特征[J]. 稀有金属材料与工程, 2009(S3):160-164. DUAN Aiqin, CHEN Li, GUO Li. Characteristics of vapor/plasmas during YAG laser welding of 5A90 Al-Li alloy[J]. Rare Metal Materials and Engineering, 2009(S3):160-164.
[10] 杨海锋,王旭友,王威,等. 铝合金双光束激光焊接过程稳定性分析[J]. 焊接学报, 2016(6):13-18, 129. YANG Haifeng, WANG Xuyou, WANG Wei, et al. Process stability analysis of double beam laser welding of aluminum alloy[J]. Transactions of The China Welding Institution, 2016(6):13-18, 129.
[11] 卢艳,张静,胡敬佩,等. 激光焊接铝合金材料过程的建模与仿真[J]. 热加工工艺, 2012(1):130-133. LU Yan, ZHANG Jing, HU Jingpei, et al. Modeling and simulation of laser welding for aluminiumalloy[J]. Hot Working Technology, 2012(1):130-133.
[12] 时君伟, 胡敏英. 铝合金激光深熔焊接热过程有限元数值模拟[J]. 热加工工艺, 2009(11):120-122. SHI Junwei, HU Minying. Finite element numerical simulation of temperature field in deep penetration laser welding for aluminum alloys[J]. Hot Working Technology, 2009(11):120-122.
[13] 朱妙凤,芦凤桂,陈云霞,等. 铝合金激光焊接过程有限元模拟与分析[J]. 焊接学报, 2008(4):97-100, 118. ZHU Miaofeng, LU Fenggui, CHEN Yunxia, et al. Finite element analysis on laser welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2008(4):97-100, 118.
[14] 雷正龙,李颖,陈彦宾,等. 双光束激光填丝焊工艺对铝合金焊接气孔率的影响[J]. 焊接学报, 2013(2):40-44, 115. LEI Zhenglong, LI Ying, CHEN Yanbin, et al. Effect of process parameters on porosity formation ratio in dual-beam laser welding of aluminum alloys with filler wire[J]. Transactions of the China Welding Institution, 2013(2):40-44, 115.
[15] 段爱琴,巩水利,张朴,等. 一种激光焊接过程温度场的测量方法:CN102967374A[P]. 2013-03-13. DUAN Aiqin, GONG Shuili, ZHANG Pu, et al. Method for measuring temperature field of laser welding process:CN102967374A[P]. 2013-03-13.
