In order to analyze the factors affecting attenuation of the surface roughness of textured work rolls, find out the primary and secondary order of each factor, explore the attenuation process of surface topography of typical textured rolls and obtain the mathematical model which can be applied to the production site, a series of experiments specific to 9Cr2Mo work rolls and Q345 strips were carried out to simulate cold rolling process under the conditions of different initial roughness, different pressure, different lubricating liquid concentration and different rolling mileage. The results show that:within the test level, the initial roughness, test mileage and rolling force are highly significant for the attenuation process of roughness, while the lubricating oil concentration has no significant effect. Among these factors, the most important influencing factor is the initial roughness, the rolling mileage is followed by, and then is the rolling force. In terms of the mathematical description of the attenuation process, the attenuation of the roughness of roll surface has a linear relationship with initial roughness and test force, while it has a exponential relationship with the rolling mileage. Based on the experiment, the mathematical model of the attenuation process of the surface roughness of textured work rolls during cold rolling is established, and the feasibility and reliability of the model is confirmed by comparing with field data.
YOU Yuan
,
LI Hongbo
,
XIA Chunyu
,
KONG Ning
,
ZHANG Jie
,
JIA Shenghui
. Experimental and Mathematical Model Study of Attenuation Process of the Surface Roughness of Textured Work Rolls during Cold Rolling[J]. Journal of Mechanical Engineering, 2018
, 54(12)
: 173
-183
.
DOI: 10.3901/JME.2018.12.173
[1] LI Rui,ZHANG Qingdong,ZHANG Xiaofeng,et al. Control method for steel strip roughness in two-stand temper mill rolling[J]. Chinese Journal of Mechanical Engineering,2015,28(3):573-579.
[2] 张清东,张勃洋,李瑞,等. 钢板微观表面质量控制理论与技术研究进展[J]. 机械工程学报,2016,52(10):32-45. ZHANG Qingdong,ZHANG Boyang,LI Rui,et al. Advances in theory and technology for microscopic surface quality control of steel strip[J]. Journal of Mechanical Engineering,2016,52(10):32-45.
[3] 徐流杰,魏世忠,王强,等. 基于BP神经网络的V9-Cr4-Mo3高速钢冷工作辊磨损模型[J]. 摩擦学学报,2006,26(6):541-545. XU Liujie,WEI Shizhong,WANG Qiang,et al. Modeling of wear process of V9-Cr4-Mo3high speed steel cooling roll via BP neural network[J]. Tribology,2006,26(6):541-545.
[4] 李长生,张晓明,刘相华,等. 轧制过程工作辊磨损数学模型试验研究[J]. 机械工程学报,2002,38(7):28-30. LI Changsheng,ZHANG Xiaoming,LIU Xianghua,et al. Experimental investigation of mathematic model on rolls wear in rolling[J]. Chinese Journal of Mechanical Engineering,2002,38(7):28-30.
[5] 邵健,何安瑞,杨荃,等. 兼顾热轧工艺润滑的工作辊磨损预报模型[J]. 中国机械工程,2009,20(3):361-364. SHAO Jian, HE Anrui,YANG Quan,et al. Work roll wear prediction model taking in account lubrication in hot rolling[J]. China Mechanical Engineering,2009,20(3):361-364.
[6] 郑旭涛,张杰,李洪波,等. 宽带钢热连轧机工作辊不均匀磨损计算模型[J]. 钢铁,2015,50(5):49-53,74. ZHENG Xutao,ZHANG Jie,LI Hongbo,et al. Work roll uneven wear prediction model in broad-strip hot rolling mill[J]. Iron and Steel,2015,50(5):49-53,74.
[7] ANTSUPOV A V,ANTSUPOV V P,SLOBODIANSKⅡ M G. Analytical model for the wide-strip rolling mills working rolls wear-out failures[J]. Procedia Engineering,2016(150):411-415.
[8] BOLT P H,BATAZZI D,BELFIORE N P. Damage resistance and roughness retention of work rolls in cold rolling mills[J]. Revue de Métallurgie,2010(107):245-255.
[9] DENG G Y,ZHUA Q,TIEUA K,et al. Evolution of microstructure, temperature and stress in a high speed steel work roll during hot rolling:Experiment and modelling[J]. Journal of Materials Processing Technology,2017(240):200-208.
[10] BATAILLE C,LUC E,BIGERELLE M,et al. Rolls wear characterization in hot rolling process[J]. Tribology International,2016(100):328-337.
[11] 吴越,张清东,刘军,等. 带钢冷轧机工作辊表面粗糙度实测研究[J]. 机械工程学报,2003,39(11):90-94. WU Yue,ZHANG Qingdong,LIU Jun,et al. Test and statistical research of surface roughness of work roll in cold tandem mills[J]. Chinese Journal of Mechanical Engineering,2003,39(11):90-94.
[12] XU Dong,ZHANG Jie,LI Hongbo,et al. Research on surface topography wear of textured work roll in cold rolling[J]. Industrial Lubrication and Tribology,2015,67(3):269-275.
[13] 张清东,张雍,李瑞,等. 带钢冷轧机工作辊表面粗糙峰轧制磨损过程离散元法研究[J]. 机械工程学报,2016,52(6):72-78,85. ZHANG Qingdong,ZHANG Yong,LI Rui,et al. Simulation of the rolling wear of work roll surface asperities during strip cold rolling by discrete element method[J]. Journal of Mechanical Engineering,2016,52(6):72-78,85.
[14] 轧制技术及连轧自动化国家重点实验室. 冷轧润滑系统设计理论及混合润滑机理研究[M]. 北京:冶金工业出版社,2015. State Key Lab of Rolling and Automation. Research of cold rolling lubrication system design theory and mixed lubrication mechanism[M]. Beijing:Metallurgical Industry Press,2015.
[15] 全永昕,施高义. 摩擦磨损原理[M]. 杭州:浙江大学出版社,1988. QUAN Yongxin,SHI Gaoyi. Principle of friction and wear[M]. Hangzhou:Zhejiang University Press,1988.
[16] 张国威. 锐缘硬质轮在金属表面的滚动与滑动[J]. 摩擦学学报,1994,14(2):116-123. ZHANG Guowei. Rolling and sliding of a sharp-edged hard wheel on metal surfaces[J]. Tribology,1994,14(2):116-123.
[17] 邱逸兵. 试验设计与数据处理[M]. 合肥:中国科学技术大学出版社,2008. QIU Yibing. Experimental design and data processing[M]. Hefei:Press of University of Science and Technology of China,2008.
[18] 张长军,张晓峰. 基于拉宾诺维奇公式的复合材料磨料磨损模型[J]. 长安大学学报,2004,24(3):88-91. ZHANG Changjun,ZHANG Xiaofeng. Rabinowizc formula oriented abrasive wear model for composite materials[J]. Journal of Chang'an University,2004,24(3):88-91.
[19] 陈心淇. 表面粗糙度对零件耐磨性能的影响[J]. 计量与测试技术,2005(7):7-8. CHEN Xinqi. Influence of surface roughness on wear resistance of parts[J]. Metrology and Measurement Technique,2005(7):7-8.
[20] 吴长春. 工作辊与钢板表面形貌及其控制的研究[D]. 北京:北京科技大学,2006. WU Changchun. Study on surface topography and its control of roll and steel sheet[D]. Beijing:University of Science and Tecnology Beijing,2006.
