The new austenitic heat resistant steel Sanicro25(UNS S31035) is a promising candidate boiler material for elevated temperature components, e.g. superheater and reheater tube of advanced ultra-supercritical coal-fired power plants with temperature up to 700℃. The prediction of their creep rupture time has a certain theoretical and practical significance for the production safety of power plants. Based on the creep test data of Sanicro25 steel at three temperatures above 700℃ and four stress levels and Sandviken's creep test data, the parameters of the Manson-Halferd (MH) model which is based on time temperature parameter method (TTP), the improved Kachanov-Rabotnov (KR) model which is based on creep damage mechanics and creep ductility model which is based on the power-law creep controlled cavity growth theory are calculated. The time-stress curves above 700℃ of three constitutive models are obtained by the extrapolation method and finite element simulation technique. The prediction effect of three constitutive models on the creep rupture time of Sanicro25 steel under long-term and low stress is analyzed. It is found that the creep ductility model is more suitable for predicting the long-term creep rupture time of Sanicro25 steel at temperatures above 700℃.
JING Hongyang
,
MENG Shan
,
ZHAO Lei
,
HAN Yongdian
,
XU Lianyong
. Creep-rupture Time Prediction of Sanicro25 Austenitic Heat Resistant Steel at Elevated Temperature[J]. Journal of Mechanical Engineering, 2018
, 54(12)
: 165
-172
.
DOI: 10.3901/JME.2018.12.165
[1] CHAI G,HERNBLOM J,PELTOLA T,et al. Creep behavior in a newly developed heat resistant austenitic stainless steel[J]. BHM Berg-und Hüttenmännische Monatshefte,2015,160(9):400-405.
[2] YUAN Y,ZHONG Z H,YU Z S,et al. Microstructural evolution and compressive deformation of a new Ni-Fe base superalloy after long term thermal exposure at 700℃[J]. Materials Science and Engineering:A,2014,619(619):364-369.
[3] SUN F,GU Y F,YAN J B,et al. Phenomenological and microstructural analysis of intermediate temperatures creep in a Ni-Fe-based alloy for advanced ultra-supercritical fossil power plants[J]. Acta Materialia,2016,102:70-78.
[4] YANG Wu,LI Guangfu,HUANG Chunbo. Stress corrosion cracking of nitrogen-containing stainless steel 316LN in high temperature water environments[J]. Chinese Journal of Mechanical Engineering,2010,23(6):677-683.
[5] SUN Jiao,CHEN Songying,QU Yanpeng. Review on stress corrosion and corrosion fatigue failure of centrifugal compressor impeller[J]. Chinese Journal of Mechanical Engineering,2015,28(2):217-225.
[6] ZHONG Yunpan,ZHOU Cheng,CHEN Songying. Effects of temperature and pressure on stress corrosion cracking behavior of 310S stainless steel in chloride solution[J]. Chinese Journal of Mechanical Engineering,2017,30(1):200-206.
[7] 张显. 超超临界锅炉用奥氏体耐热钢Sanicro25的性能[J]. 发电设备,2015,29(6):439-442. ZHANG Xian. Properties of Austenitic heat-resistant steel Sanicro25 for ultra-supercritical boilers[J]. Power Equipment,2015,29(6):439-442.
[8] ZHANG Yu,JING Hongyang,XU Lianyong,et al. High-temperature deformation and fracture mechanisms of an advanced heat resistant Fe-Cr-Ni alloy[J]. Materials Science and Engineering:A,2017,686:102-112.
[9] 温建锋. 基于应变的损伤力学模型及其在蠕变裂纹扩展数值模拟中的应用[D]. 上海:华东理工大学,2014. WEN Jianfeng. Strain-based damage mechanics model and its application to numerical simulations of creep crack growth[D]. Shanghai:East China University of Science and Technology,2014.
[10] 陈学东,范志超,陈凌,等. 三种疲劳蠕变交互作用寿命预测模型的比较及其应用[J]. 机械工程学报,2007,43(1):62-68. CHEN Xuedong,FAN Zhichao,CHEN Ling,et al. Comparison among three fatigue-creep interaction life prediction models and their applications[J]. Chinese Journal of Mechanical Engineering,2007,43(1):62-68.
[11] 张萌,轩福贞. 汽轮机转子钢蠕变损伤的非线性超声评价[J]. 机械工程学报,2016,52(2):76-81. ZHANG Meng,XUAN Fuzhen. Creep damage evaluation of steam turbine rotor steel by using the nonlinear ultrasonic technique[J]. Journal of Mechanical Engineering,2016,52(2):76-81.
[12] BENDICK W,CIPOLLA L,GABREL J,et al. New ECCC assessment of creep rupture strength for steel grade X10CrMoVNb9-1(Grade 91)[J]. International Journal of Pressure Vessels and Piping,2010,87(6):304-309.
[13] 刘彦. 一种含局部化效应的蠕变损伤理论及其在蠕变裂纹扩展中的应用[D]. 成都:西南交通大学,1990. LIU Yan. A creep damage theory with localization effect and its application in creep crack propagation[D]. Chengdu:Southwest Jiaotong University,1990.
[14] SIQUEIRA R P,SANDIM H R Z,OLIVEIRA T R,et al. Composition and orientation effects on the final recrystallization texture of coarse-grained Nb-containing AISI 430 ferritic stainless steels[J]. Materials Science and Engineering:A,2011,528(9):3513-3519.
[15] CHAI G,NILSSON J O,BOSTROM M,et al. Advanced heat resistant austenitic stainless steels[J]. Springer Berlin Heidelberg,2011:385-397.
[16] KASSNER M E,Fundamentals of Creep in Metals and alloys[M]. Boston:Butterworth-Heinemann,2015.
[17] 赵彩丽,刘新宝,郝巧娥,等. 高温金属构件蠕变寿命预测的研究进展[J]. 材料导报,2014,28(12):55-59. ZHAO Caili,LIU Xinbao,HAO Qiaoe,et al. Progress in prediction methods of creep-rupture time for elevated-temperature metal components[J]. Materials Review,2014,28(12):55-59.
[18] HYDE T H,XIA L,BECKER A A. Prediction of creep failure in aeroengine materials under multi-axial stress states[J]. International Journal of Mechanical Sciences,1996,38(4):385-403.
[19] DYSON B F. Constraints on diffusional cavity growth rates[J]. Metal Science,2013,126(10):349-353.
[20] RAJ R,ASHBY M F. Intergranular fracture at elevated temperature[J]. Acta Metallurgica,1975,23(6):653-666.
[21] COCKS A C F,ASHBY M F. Intergranular fracture during power-law creep under multiaxial stresses[J]. Metal Science,2015,14(8-9):395-402.
