The influence of several typical rail corrugations on the sound radiation of the wheel is investigated by a hybrid model based on bathe implicit-explicit integration finite element method(FEM) and boundary element method(BEM) method. Firstly, a three-dimensional wheel/rail transient contact model with the presence of rail corrugation is established by using Ansys/Ls-dyna software, and the characteristics of wheel/rail contact force under corrugation excitation are obtained. Then the wheel/rail force is input to the FEM/BEM vibration sound radiation model, and the sound radiation analysis of the wheel is carried out under corrugation excitation. The results show that the model can reflect the influence of corrugation on the nonlinearity of the wheel/rail contact force. Rail corrugation increases the interaction between the wheel and rail, and the shorter the wavelength or the deeper the wave depth is, the greater the impact on the wheel-rail force. For the straight-type web wheel, when the wavelength is large or the wave depth is small, the sound power of the wheel is mainly from radial modal vibration contribution, when the wavelength is shorter or the wave depth is large, mainly due to the wheel vibration at passing frequency of rail corrugation.
ZHOU Xin
,
ZHAO Xin
,
HAN Jian
,
HE Yuanpeng
,
WEN Zefeng
,
JIN Xuesong
. Study on Transient Rolling Noise Characteristics of Subway Wheel with Rail Corrugation[J]. Journal of Mechanical Engineering, 2018
, 54(4)
: 196
-202
.
DOI: 10.3901/JME.2018.04.196
[1] THOMPSON D J, JONES C J. A review of the modelling of wheel/rail noise generation[J], Journal of Sound and Vibration, 2000, 231(3):519-536.
[2] 金学松, 李霞, 李伟, 等. 铁路钢轨波浪形磨损研究进展[J]. 西南交通大学学报, 2016, 51(2):264-273. JIN Xuesong, LI Xia, LI Wei, et al. Review of rail corrugation progress[J]. Journal of Southwest of Jiaotong University, 2016, 51(2):264-273.
[3] 李伟. 地铁钢轨波磨成因及其对车辆/轨道行为的影响[D]. 成都:西南交通大学, 2015. LI Wei. Study on root cause of metro rail corrugation and its influence on behavior of vehicle-track system[D]. Chengdu:Southwest Jiaotong University, 2015.
[4] REMINGTON P J. Wheel/rail rolling noise, I:Theoretical analysis[J]. Journal of the Acoustical Society of America, 1987, 81:1805-1823.
[5] THOMPSON D J. Wheel-rail noise:Theoretical modelling of the generation of vibrationsp[D]. Boston:University of Southampton, 1990.
[6] THOMPSON D J, Jones C J. A review of the modelling of wheel/rail noise generation[J]. Journal of Sound and Vibration. 2000, 231(3):519-536.
[7] WU T X, THOMPSON D J. A hybrid model for the noise generation due to railway wheel flats[J]. Journal of Sound and Vibration, 2002, 251:115-139.
[8] WU T X, THOMPSON D J. On the impact noise generation due to a wheel passing over rail joints[J]. Journal of Sound and Vibration, 2003, 267(3):485-496.
[9] HAN Jian, ZHONG Shuoqiao, ZHOU Xin. Time-domain model for wheel-rail noise analysis at high operation speed[J]. Journal of Zhejiang University-SCIENCE A, 201718(8):593-602.
[10] LI Z, ZHAO X, ESVELD C, et al. An investigation into the causes of squats-Correlation analysis and numerical modeling[J]. Wear, 2008:1349-1355.
[11] ZHAO X, LI Z. The solution of frictional wheel-rail rolling contact with a 3D transient finite element model:Validation and error analysis[J]. Wear, 2011, 271(1-2):444-452.
[12] 赵鑫, 温泽峰, 王衡禹, 等. 三维高速轮轨瞬态滚动接触有限元模型及其应用[J]. 机械工程学报, 2013, 49(18):1-7. ZHAO Xin, WEN Zefeng, WANG Hengyu, et al. 3D transient finite element model for high-speed wheel-rail rolling contact and its application[J]. Chinese Journal of Mechanical Engineering, 2013, 49(18):1-7.
[13] CHAAR N, BERG M. Simulation of vehicle-track interaction with flexible wheelsets, moving track models and field tests[J]. Vehicle System Dynamics, 2006, 44:921-931.
[14] WU T W. Boundary element acoustics:fundamentals and computer codes. Advances in boundary elements[M]. Southampton, Boston:WIT Press, 2000.
[15] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 6882-2016. 声学声压法测定噪声源声功率级和声能量级消声室和半消声室精密法[S]. 北京:中国标准出版社,2016. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. GB/T 6882-2016. Acoustic-Determination of sound power levels and sound energy levels of noise sources using sound pressure-Precision methods for anechoic rooms and hemi-anechoic rooms[S]. Beijing:Standards Press of China, 2016.
