[1] SUN Hongtu,HU Ping,MA Ning,et al. Application of hot forming high strength steel parts on car body in side impact[J]. Chinese Journal of Mechanical Engineering,2010,23(2)：252-256.
[2] 李永兵,李亚庭,楼铭,等. 轿车车身轻量化及其对连接技术的挑战[J]. 机械工程学报,2012,48(18)：44-54.
LI Yongbing,LI Yating,LOU Ming,et al. Lightweighting of car body and its challenges to joining technologies[J]. Journal of Mechanical Engineering,2012,48(18)：44-54.
[3] 马宁,申国哲,张宗华,等. 高强度钢板热冲压材料性能研究及在车身设计中的应用[J]. 机械工程学报,2011,47(8)：60-65.
MA Ning,SHEN Guozhe,ZHANG Zonghua,et al. Material performance of hot-forming high strength steel and its application in vehicle body[J]. Journal of Mechanical Engineering,2011,47(18)：60-65.
[4] CHOI K S,LIU W N,SUN X,et al. Influence of martensite mechanical properties on failure mode and ductility of dual-phase steels[J]. Metallurgical and Materials Transactions A,2009,40(4)：796-809.
[5] ROCHA R O,MELO T M F,PERELOMA E V,et al. Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel[J]. Materials Science and Engineering A,2005,391(1-2)：296-304.
[6] ZHAO Zhengzhi,TONG Tingting,LIANG Juhua,et al. Microstructure,mechanical properties and fracture behavior of ultra-high strength dual-phase steel[J]. Materials Science and Engineering A,2014,618(17)：182-188.
[7] HUANG Sheng,HE Chunfeng,ZHAO Yixi,et al. Uniaxial tension simulation using real microstructure- based representative volume elements model of dual phase steel plate[J]. Procedia Engineering, 2014,81：1384-1389.
[8] SIRINAKORN T, UTHAISANGSUK V, SRIMANOSAWAPAL S. Microstructure based description of deformation behavior of dual phase steel sheets[J]. Procedia Engineering,2014,81：1366-1371.
[9] SAAI A,HOPPERSTAD O S,GRANBOM Y,et al. Influence of volume fraction and distribution of martensite phase on the strain localization in dual phase steels[J]. Procedia Materials Science,2014,3：900-905.
[10] 张红梅,孙彬斌,贾志伟,等. 热轧双相钢显微组织和力学性能[J]. 材料热处理学报,2007,28(4)：78-82.
ZHANG Hongmei,SUN Binbin,JIA Zhiwei,et al. Microstructure and mechanical properties of as-hot rolled dual-phase steel[J]. Transactions of Materials and Heat Treatment,2007,28(4)：78-82.
[11] 代启锋,宋仁伯,关小霞,等. 铁素体晶粒尺寸对铁素体—马氏体双相钢DP980动态变形行为影响[J]. 机械工程学报,2012,48(6)：44-50.
DAI Qifeng,SONG Renbo,GUAN Xiaoxia,et al. Effects of ferrite grain size on dynamic deformation behavior of ferrite-martensite dual phase steel DP980[J]. Journal of Mechanical Engineering,2012,48(6)：44-50.
[12] THOMSER C,UTHAISANGSUK V,BLECK W. Influence of martensite distribution on the mechanical properties of dual phase steels：Experiments and simulation[J]. Steel Research International,2009,80(8)：582-587.
[13] DELINCÉ M,BRÉCHET Y,EMBURY J D,et al. Structure-property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model[J]. Acta Materialia,2007,55(7)：2337-2350.
[14] PARK K,NISHIYAMA M,NAKADA N,et al. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel[J]. Materials Science and Engineering A,2014,604(16)：135-141.
[15] PIERMAN A P,BOUAZIZ O,PARDOEN T,et al. The influence of microstructure and composition on the plastic behaviour of dual-phase steels[J]. Acta Materialia,2014,73：298-311.
[16] 黄群飞,何燕霖,罗娟娟,等. 马氏体体积分数对双相钢变形行为的影响[J]. 钢铁,2009,44(4)：60-63.
HUANG Qunfei,HE Yanlin,LUO Juanjuan,et al. Effect of different volume fraction of martensite on deformation behavior of dual phase steels[J]. Iron and Steel,2009,44(4)：60-63.
[17] ZHUANG W,WANG S,CAO J,et al. Modelling of localised thinning features in the hydroforming of micro-tubes using the crystal-plasticity FE method[J]. The International Journal of Advanced Manufacturing Technology,2010,47(9-12)：859-865.
[18] WANG Shiwen,ZHUANG Weimin,CAO Jian,et al. An investigation of springback scatter in forming ultra-thin metal-sheet channel parts using crystal plasticity FE analysis[J]. The International Journal of Advanced Manufacturing Technology,2010,47(9-12)：845-852.
[19] LEE H N,CHANG S T,RYOO H S,et al. Topology and grain size distribution of a two dimensional microstructure produced by a computer tessellation method[J]. Metals and Materials International,1998,4(1)：67-73.
[20] GHOSH S,MOORTHY S. Three dimensional Voronoi cell finite element model for microstructures with ellipsoidal heterogeneties[J]. Computational Mechanics,2004,34(6)：510-531.
[21] 杨庆祥,吴晶,赵宏,等. 双相不锈钢应力应变曲线数值模拟[J]. 材料热处理学报,2005,26(5)：124-128.
YANG Qingxiang,WU Jing,ZHAO Hong,et al. Numerical simulation of stress-strain curve of duplex stainless steel[J]. Transactions of Materials and Heat Treatment,2005,26(5)：124-128.
[22] 冀翠莲,周慎杰,田蕴,等. 基于质心Voronoi结构的布点算法及应用[J]. 机械工程学报,2008,44(1)：168-172.
JI Cuilian,ZHOU Shenjie,TIAN Yun,et al. Node placement algorithm and application based on the centroidal Voronoi tessellation[J]. Chinese Journal of Mechanical Engineering,2008,44(1)：168-172.
[23] 贾超,王蓓蓓,孔凡树,等. 基于区域Voronoi图的复杂形体的三维重建算法[J]. 机械工程学报,2009,45(6)：274-283.
JIA Chao,WANG Beibei,KONG Fanshu,et al. Reconstruct complex 3D object algorithm based on region Voronoi diagram[J]. Journal of Mechanical Engineering,2009,45(6)：274-283.
[24] FORTUNE S. A fast algorithm for polygon containment by translation[C]//Lecture Notes in Computer Science. Proceedings of the 12th Colloquium on Automata,Languages and Programming,July 15-19,1985,Nafplion,Greece. Springer Berlin Heidelberg,1985：189-198.
[25] ZHU H X,THORPE S M,WINDLE A H. The geometrical properties of irregular two-dimensional Voronoi tessellations[J]. Philosophical Magazine A,2001,81(12)：2765-2783.
[26] CALCAGNOTTO M,PONGE D,RAABE D. Effect of grain refinement to 1μm on strength and toughness of dual-phase steels[J]. Materials Science and Engineering A,2010,527(29-30)：7832-7840.
[27] SAEIDI N,ASHRAFIZADEH F,NIROUMAND B. Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior[J]. Materials Science and Engineering A,2014,599(2)：145-149.
