For centrifugally cast 25Cr35NiNb+microalloy and 35Cr45NiNb+microalloy furnace tube, the morphology, distribution and type of primary carbides in original as-cast microstructure are analyzed by optical microscope and scanning electron microscope, and the high temperature rupture tests are carried out by using high temperature creep testing machine. The metallographic results show that the morphology of primary carbides in centrifugally cast furnace tube material can be divided into normal type, which refers to skeletal or fine strip Cr carbide + short rod or granular NbC in grain boundary, and abnormal type, which refers to cluster shape or fine granular or dash-dotted line like Cr carbide + cluster NbC (or G phase) in grain boundary. The high temperature rupture test results under the condition of 900-1 100℃ and 12-45 MPa stress level show that the rupture time of furnace tubes with normal type primary carbides are longer than those of abnormal type. Finally, the reference maps of normal type and abnormal type microstructure are offered to quickly estimate the high temperature performance of furnace tubes.
CHEN Tao
,
CHEN Xuedong
,
LIU Chunjiao
,
QIAN Bing
. Classification of Primary Carbides in Ethylene Pyrolysis Furnace Tubes and the Effects on High Temperature Rupture Performance[J]. Journal of Mechanical Engineering, 2018
, 54(8)
: 109
-116
.
DOI: 10.3901/JME.2018.08.109
[1] 陈涛, 陈学东,吕运容,等. 国产乙烯裂解炉管抽样检测状况[J]. 压力容器, 2014, 31(3):45-55. CHEN Tao, CHEN Xuedong, LÜ Yunrong, et al. Status of sampling testing of ethylene pyrolysis furnace tubes in China[J]. Pressure Vessel Technology, 2014, 31(3):45-55.
[2] 武永红,李永堂,齐会萍,等. 基于铸辗连续成形的42CrMo铸造环坯高温力学性能及临界应变计算[J]. 机械工程学报, 2017, 53(6):45-52. WU Yonghong, LI Yongtang, QI Huiping, et al. High temperature mechanical properties and calculation of critical strain for 42CrMo ring blank based on casting-rolling forming technology[J]. Journal of Mechanical Engineering, 2017, 53(6):45-52.
[3] CHEN T, CHEN X D, LIAN X M, et al. Effect of Ti additions on microstructure and mechanical properties of centrifugally cast 25Cr-35Ni-Nb alloy[C]//Proceedings of the ASME 2016 Pressure Vessels & Piping Division Conference, July 17-21, 2016, Vancouver, BC, Canada.
[4] CHEN T, CHEN X D, LV Y R, et al. Effects of trace Pb on creep and fracture of 25Cr35Ni-Nb alloy[C]//Proceedings of the ASME 2015 Pressure Vessels & Piping Division Conference, July 19-23, 2015, Boston, USA.
[5] 叶娟,李毅,陈涛,等. Pb对离心铸造35Cr45NiNb合金炉管蠕变断裂的影响[J]. 化工设备与管道, 2016, 53:28-33. YE Juan, LI Yi, CHEN Tao, et al. Effect of Pb to creep rupture of 35Cr45NiNb alloy furnace pipe manufactured with centrifugal forging[J]. Process Equipment and Piping, 2016, 53:28-33.
[6] CHEN T, CHEN X D, LV Y R, et al. Creep and fracture behavior of centrifugal cast HP40Nb alloy containing lead[C]//Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference, July 15-19, 2012, Toronto, Ontario, CANADA.
[7] CHEN T, CHEN X D, LIAN X M, et al. Grain boundary and surface segregation in relation to intergranular fracture at high temperature:Boron and sulfur in a Fe-Cr-Ni alloy[C]//Procedia Engineering, 2015, 130:589-597.
[8] CHEN T, CHEN X D, YE J. Sulfur effects on high-temperature creep and fracture behavior of 25Cr35Ni-Nb alloys[J]. Journal of Pressure Vessel Technology, 2014, 136:041407-1-7.
[9] 陈涛,陈学东,刘春娇,等. 离心铸造乙烯裂解炉管高温持久试验的金相组织影响[C]//压力容器先进技术第八届全国压力容器学术会议论文集, 2013, 140-147. CHEN Tao, CHEN Xuedong, LIU Chunjiao, et al. Influence of micro structure on rupture life in centrifugal casting ethylene pyrolysis furnace tubes[C]//Proceedings of the Eighth National Symposium on Pressure Vessels, 2013, 140-147.
[10] 中华人民共和国工业和信息化部. HG/T2601-2011. 高温承压用离心铸造合金炉管[S]. 北京:中国标准出版社, 2011. Ministry of industry and information technology of the people's republic of china. HG/T2601-2011. Centrifugal casting alloy tubes for service of pressure bearing at high temperature[S]. Beijing:China Standard Press, 2011.
[11] 中华人民共和国工业和信息化部. SH/T3423-2011. 石油化工管式炉用铸造高合金炉管及管件技术条件[S]. 北京:中国标准出版社, 2011. Ministry of industry and information technology of the people's republic of china. SH/T3423-2011. High alloy cast tube and fitting of tubular heater in petrochemical engineering[S]. Beijing:China Standard Press, 2011.
[12] SUSTAITA-TORRES I A, HARO-RODRIGUEA S, GUERRERO-MATA M P, et al. Ageing of a cast 35Cr-45Ni heat resistant alloy[J]. Materials Chemistry and Physics, 2012, 133:1018-1023.
[13] ALMEIDA L H d, RIBEIRO A F, MAY I L. Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes[J]. Material Characterization, 2003, 49:219-229.
[14] 秦芳诚,李永堂. 铸辗成形大口径25Mn钢环件微织构及力学性能[J]. 机械工程学报, 2016, 52(8):112-118. QIN Fangcheng LI Yongtang. Micro-texture and mechanical properties of 25Mn large-scale ring based on casting-rolling forming technology[J]. Journal of Mechanical Engineering, 2016, 52(8):112-118.
[15] 庄法坤,涂善东,周帼彦,等. 不同小试样测量蠕变性能的比较研究[J]. 机械工程学报, 2015, 51(6):9-18. ZHUANG Fakun, TU Shantung, ZHOU Guoyan, et al. Comparative study on the determination of creep properties by using different types of small specimens[J]. Journal of Mechanical Engineering, 2015, 51(6):9-18.
[16] 郭岩,侯淑芳,周荣灿. 晶界M23C6碳化物对IN617合金力学性能的影响[J]. 动力工程学报, 2010, 30(10):804-808. GUO Yan, HOU Shufang, ZHOU Rongcan. Effect of grain-boundary M23C6 carbides on mechanical properties of inconel alloy 617[J]. Journal of Chinese Society of Power Engineering, 2010, 30(10):804-808.
