For the increasing problems of hydraulic pipeline fittings fatigue failure of construction machinery product, it's quite necessary to analyze the complicated force load of hydraulic pipeline fittings. The load calibration test has been used to analyze the force load of hydraulic pipeline fittings, by using of strain gauge bridge combination, the effect of temperature on strain can be eliminated, and it's achievable that the external force of right-angle elbow can be represented by one space triaxial force and one pipe pressure force. All the force load measurements of right-angle elbow have been analyzed by multiple linear regression analysis, and the relation equations between input load and output strain had been gained, which can transform strain spectrum on actual working condition into load force, and finally obtain the actual force load of test sample, that can provide real and reliable load spectrum or boundary conditions for FEA, fatigue life estimation, and reliability designs of hydraulic pipeline fittings.
BIN Shibo
,
XIONG Yaozhi
,
GAO Ting
,
WEN Zhisheng
. Load Calibration Test and Multiple Linear Regression Analysis for Hydraulic Pipeline Fittings[J]. Journal of Mechanical Engineering, 2018
, 54(6)
: 128
-132
.
DOI: 10.3901/JME.2018.06.128
[1] DIYA A, MAURO M, UWE Z, et al. Instability analysis of pressurised pipes with longitudinal surface cracks[J]. International Journal of Pressure Vessels and Piping, 2015(126-127):48-57.
[2] BRICKSTAD B, JOSEFSONB B L. A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes[J]. International Journal of Pressure Vessels and Piping, 1998, 75:11-25.
[3] KISEOK K, KYUNG J, JUNGWON H, et al. Reliability-based calibration of resistance factors for static bearing capacity of driven steel pipe[J]. Can. Geotech. J., 2010, 47:528-538.
[4] DEAN D, HIDEKAZU M. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements[J]. Computational Materials Science, 2006, 37:269-277.
[5] COUGHLIN C R, CLAPHAM L, ATHERTON D L. Effects of stress on MFL responses from elongated corrosion pits in pipeline steel[J]. NDT&E International, 2000, 33:181-188.
[6] DURANTON P, DEVAUXA J, ROBIN V, et al. 3D modelling of multipass welding of a 316L stainless steel pipe[J]. Journal of Materials Processing Technology, 2004(153-154):457-463.
[7] 赵启成, 王振清, 杜永军,等. 油管螺纹应力应变场的有限元分析与检测[J]. 计量学报, 2005, 26(3):253-258. ZHAO Qicheng, WANG Zhenqing, DU Yongjun, et al. Finite element analysis and inspection of stress and strain field in tubular joints screw thread[J]. Acta Metrologica Sinica, 2005,26(3):253-258.
[8] 殷军辉, 郑坚, 刘洪伟. 基于Matlab的自行火炮液压管件应力分析[J]. 计算机工程与设计, 2009, 30(14):3419-3421. YIN Junhui, ZHENG Jian, LIU Hongwei. Analysis of self-propelled gun hydraulic pipe component's stress based on Matlab[J]. Computer Engineering and Design, 2009, 30(14):3419-3421.
[9] 吴晓南, 昝林峰, 蒋喜,等. CAESAR 1I软件在大口径厚壁钢管应力分析中的可靠性研究[J]. 管道技术与设备, 2013(4):7-9. WU Xiao, JIU Linfen, JIANG Xi, et al. Study of CAESAR Ⅱ'S reliability in large·diameter heavy section steel tube[J]. Pipeline Technique and Equipment, 2013(4):7-9.
[10] 张书明, 高建民, 冯炳元,等. 大型结构部件载荷标定试验方法研究[J]. 农业机械学报, 2000, 31(4):85-88. ZHANG Shuming, GAO Jianmin, FENG Bingyuan, et al. Study on load calibration test for large-sized structural components[J]. Journal of Agricultural Machinery, 2000,31(4):85-88.
[11] 吴伟, 张书明, 滕启,等. 起落架载荷测量与标定试验研究[J]. 机械强度, 2003, 25(1):48-51. WU Wei, ZHANG Shuming, TENG Qi, et al. Study on load measurement and calibration test for airplane landing gear[J]. Journal of Mechanical Strength, 2003, 25(1):48-51.
[12] 阎楚良, 张书明, 卓宁生,等. 飞机机翼结构载荷测量试验力学模型与数据处理[J]. 航空学报, 2000, 21(6):56-59. YAN Chuliang, ZHANG Shuming, ZHUO Ningsheng, et al. Mechanical model and data processing of load measurement test for the airplane swing structure[J]. Acta Aeronautica et Astronautica Sinica, 2000, 21(6):56-59.
[13] 叶舸. 大型结构部件载荷标定方法和数据处理系统研究[D]. 北京:中国农业大学, 2000. YE Ge, study on method of load test calibration and data processing system for large-sized structural components[D]. Beijing:China Agricultural University, 2000.
