Mechanical clinching is a connection technology widely used in different industrial fields because of several advantages such as easy to operate, high efficiency, etc. Fatigue damage is a main failure mode of the metal mechanical part. Fretting wear is one of the reasons which lead to component failure. Tensile-shear tests and fatigue test were carried out to characterize the mechanical properties of the clinched joints of aluminum alloy sheet. Results show that the fatigue failure parts of the clinched joints are concentrated in the indentation of the lower sheet. There are many fatigue abrasive dust on the cracks. Energy spectrum analysis illustrated that chemical composition is aluminum oxide and metallic aluminum. Scanning electron microscopy analysis shows that there are two types of fretting wear modes which are defined. One was named neck fretting wear and the other is round-indentation fretting wear. The two types of fretting wear modes' proportion are changed by the applied load. Fretting wear is one of the important factors leading to fatigue failure of the clinched joint.
ZHANG Yue
,
HE Xiaocong
,
LI Zhi
,
ZHANG Yihe
. Fretting Fatigue Mechanism Research of the Aluminum Alloy Clinched Joints[J]. Journal of Mechanical Engineering, 2018
, 54(19)
: 190
-196
.
DOI: 10.3901/JME.2018.19.190
[1] HE X C,GU F S,BALL A. Fatigue behaviour of fastening joints of sheet materials and finite element analysis[J]. Advances in Mechanical Engineering,2013(3):533-542.
[2] ESHTAYEH M M,HRAIRI M. Recent and future development of the application of finite element analysis in clinching process[J]. International Journal of Advanced Manufacturing Technology,2016,84(9-12):2589-2608.
[3] MUCHA J. The analysis of lock forming mechanism in the clinching joint[J]. Materials and Design,2011,32(10):4943-4954.
[4] LAMBIASE F. Mechanical behavior of polymer-metal hybrid joints produced by clinching using different tools[J]. Materials and Design,2015,87(10):606-618.
[5] LEE C J,KIM J Y,LEE S K,et al. Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets[J]. Journal of Mechanical Science and Technology,2010,24(1):123-126.
[6] HE X C,ZHAO L,YANG H Y,et al. Investigations of strength and energy absorption of clinched joints[J]. Computational Materials Science,2014,94(C):58-65.
[7] HE X C,LIU F L,XING B Y et al. Numerical and experimental investigations of extensible die clinching[J]. International Journal of Advanced Manufacturing Technology, 2014,74(9-12):1229-1236.
[8] HE X C,ZHANG Y,XING B Y,et al. Mechanical properties of extensible die clinched joints in titanium sheet materials[J]. Materials and Design,2015,71(4):26-35.
[9] LAMBIASE F. Damage analysis in mechanical clinching:Experimental and numerical study[J]. Journal of Materials Processing Technology,2016,230(4):109-120.
[10] 何明鉴. 机械构件的微动疲劳[M]. 北京:国防工业出版社.1994. HE Mingjian. Fretting fatigue of mechanical components[M]. Beijing:National Defense Industry Press,1994.
[11] 陶峰,张雨. LY12CZ铝合金微动损伤机制的研究[J].航空材料学报,2002,22(2):1-4. TAO Feng,ZHANG Yu. Research on mechanism of LYl2CZ aluminum alloy fretting damage[J]. Journal of Aeronautical Materials,2002,22(2):1-4.
[12] 董祥林,田铁忠. 微动对铝合金板典型接头疲劳强度的影响[J]. 航空学报,1988,A1:43-48. DONG Xianglin,TIAN Tiezhong. The effect of fretting on fatigue strength for typical Joint of aluminum alloy sheets[J]. Acta Aeronautica Et Astronautica Sinica,1988,A1:43-48.
[13] 朱旻昊,周仲荣. 微动白层形成的控制因素及其对磨损过程的影响[J]. 摩擦学学报,2004,24(1):51-55. ZHU Minhao,ZHOU Zhongrong. Factor controlling white layer initiation in fretting and the effect on wear process[J]. Tribology,2004,24(1):51-55.
[14] CHEN Y K,HAN L,CHRYSANTHOU A,et al. Fretting wear in self-piercing riveted aluminium alloy sheet[J]. Wear,2003,255(7-12):1463-1470.
[15] HUANG L,BONNEN J,LASECKⅡ J,et al. Fatigue and fretting of mixed metal self-piercing riveted joint[J]. International Journal of Fatigue,2014,83:230-239.
[16] KANG S H,KIM H K. Fatigue strength evaluation of self-piercing riveted Al-5052 joints under different specimen configurations[J]. International Journal of Fatigue,2015,80:58-68.
[17] 张先炼,何晓聪,赵伦,等. 钛合金薄板自冲铆接工艺及失效行为研究[J]. 机械工程学报,2018,52(13):202-207. ZHANG Xianlian,HE Xiaocong,ZHAO Lun,et al. Process and failure behaviors of self-piercing riveting in titanium alloy sheets[J]. Journal of Mechanical Engineering,2018,52(13):202-207.
[18] CARBON M,BERETTA S,MONNO M. Fatigue behavior of tensile-shear loaded clinched joints[J]. Engineering Fracture Mechanics,2006,73(2):178-190.
[19] XING B,HE X,WANG Y,et al. Study of mechanical properties for copper alloy H62 sheets joined by self-piercing riveting and clinching[J]. Journal of Materials Processing Tech.,2015,216(216):28-36.
[20] COPPIETERS S,ZHANG H,XU F,et al. Process-induced bottom defects in clinch forming:Simulation and effect on the structural integrity of single shear lap specimens[J]. Materials and Design,2017,130:336-348.
[21] HADDLETON,FRANK L. The properties of advanced alumimium alloy systems[D]. Birmingham:Aston University,1987.
[22] 钟群鹏,赵子华. 断口学[M]. 北京:高等教育出版社,2006. ZHONG Qunpeng,ZHAO Zihua. Fractography[M]. Beijing:Higher Education Press,2006.
[23] 周仲荣,LEO Vincent. 微动磨损[M]. 北京:科学出版社,2002. ZHOU Zhongrong,LEO Vincent. Fretting wear[M]. Beijing:Science Press,2002.
