The expressions of K factor and compliance C of general cracked specimens are very different from each other, and the number of formula parameters of K factor andthe compliance C for some specimens are much more than six, this is not convenient for application. The acquisition of K factor andthe compliance C expression for nonstandard samples mainly adopts the regression and fitting methods, it is quite complicated. A unified model with only 2 or 3 parameters to predict K factor and compliance C for nine components with mode-I crack is proposed based on the Chen-Cai energy equivalence method. Verifications show that the unified model of K factor and compliance C is in good agreement with the formulas in references and the results from finite element analysis. The establishment of the unified model is simple and effective, and it is convenient for engineering application. Therefore, the novel method is convenient to obtain the semi-analytical expressions of K factor and C for cracked specimens.
HE Yi
,
CAI Lixun
,
CHEN Hui
. Unified Model of K Factor and Compliance Based on Energy Equivalence Principle[J]. Journal of Mechanical Engineering, 2018
, 54(14)
: 98
-106
.
DOI: 10.3901/JME.2018.14.098
[1] IRWIN G R. Analysis of stresses and strains near the end of a crack traversing a plate[J]. Journal of Applied Mechanics,1957,24(3):361-364.
[2] 刘涛,蔡力勋,高怡斐,等. GB/T 21143-2014金属材料准静态断裂韧度的统一试验方法[S]. 北京:中国标准出版社,2015. LIU Tao,CAILixun,GAO Yifei,et al. GB/T 21143-2014 Metallicmaterials-unified method of test for determination of quasistatic fracture toughness[S]. Beijing:Standards Press of China,2015.
[3] FEDDERN G,MACHERAUCH E. New specimen geometry for KIC measurements[J]. Z. Metallkunde,1973,64(12):882-884.
[4] NEWMAN J C. Stress-intensity factors and crack-opening displacements for round compact specimens[J]. International Journal of Fracture,1981,17(6):567-578.
[5] CHIESA M,NYHUS B,SKALLERUD B,et al. Efficient fractureassessment of pipelines. A constraint-corrected SENT specimen approach[J]. Engineering Fracture Mechanics,2001,68(5):527-547.
[6] 姚瑶,蔡力勋,包陈,等.基于SENT试样获取材料断裂韧度的载荷分离法研究[J]. 机械工程学报,2014,50(10):48-57. YAO Yao,CAI Lixun,BAO Chen,et al. Study on the load separation method of SENT specimens for fracturetoughness assessment[J]. Journal of Mechanical Engineering,2014,50(10):48-57.
[7] BAO Chen,CAI Lixun,DAN Chen. Estimation of fatigue crack growth behavior for small-sized C-shaped inside edge-notched tension (CIET) specimen using compliance technique[J]. International Journal of Fatigue,2015,81:202-212.
[8] 但晨,蔡力勋,包陈,等. 用于断裂韧性测试的C形环小试样规则化方法与应用[J]. 机械工程学报,2015,51(14):54-65. DAN Chen,CAI Lixun,BAO Chen,et al. Normalization method used to determine fracture toughness with C-ringsmall sized specimen and its application[J]. Journal ofMechanical Engineering,2015,51(14):54-65.
[9] 赵兴华. 用于C250钢的疲劳试验方法研究[D]. 成都:西南交通大学,2015. ZHAO Xinghua. Research on fatigue test method for C250 steel[D]. Chengdu:Southwest Jiaotong University,2015.
[10] 赵兴华,蔡力勋,包陈. CRO试样的疲劳裂纹扩展行为试验方法研究[J]. 工程力学,2016(11):20-28. ZHAO Xinghua,CAI Lixun,BAO Chen. Testing method study on fracture crack propagation behavior of CRO specimen[J]. Engineering Mechanics,2016(11):20-28
[11] ANDERSON T L. Fracture mechanics-fundamentals and applications[J]. NASA STI/Recon Technical Report A,1991,92.
[12] RICE J R. A path independent integral and the approximate analysis of strain concentration by notches and cracks[J]. Journal of Applied Mechanics,1968,35(2):379-386.
[13] 包陈,蔡力勋,石凯凯,等. 金属材料准静态断裂性能标准测试技术研究进展[J]. 机械工程学报,2016,52(8):76-89. BAO Chen,CAI Lixun,SHI KK,et al. Progress on the standard test technology of quasistatic fracture toughness for metallic materials[J]. Journal of Mechanical Engineering,2016,52(8):76-89.
[14] 姚瑶. 用于获取金属材料延性断裂韧性的非标准试样测试方法研究[D]. 成都:西南交通大学,2013. YAO Yao. The fracture toughness testing methods of non-standard specimens and their application[D]. Chengdu:Southwest Jiaotong University,2013.
[15] 包陈,蔡力勋,陈燕. 柔度发研究镍铬合金焊材的高温疲劳裂纹扩展行为[J]. 固体力学学报,2010,31(1):8-15. BAO Chen,CAI Lixun,CHEN Yan. Estimation of fatigue crack growth rates for nickel-chromium alloy welding materials at high temperature using the compliance method[J]. Chinese Journal of Solid Mechanics,2010,31(1):8-15.
[16] 但晨. 小尺寸试样材料断裂性能测试方法与应用[D]. 成都:西南交通大学,2014. DAN Chen. The fracture toughness testing methods for small size specimens and their application[D]. Chengdu:Southwest Jiaotong University,2014.
[17] CHEN Hui,CAI Lixun. Theoretical model for predicting uniaxial stress-strain relation by dual conical indentation based on equivalent energy principle[J]. Acta Materialia,2016,121:181-189.
[18] CHEN Hui,CAI Lixun. Unified elastoplastic model based on strain energy equivalence principle[J]. Applied Mathematical Modelling,2017,52:664-671.
[19] CHEN Hui,CAI Lixun. Unified ring-compression model for determining tensile properties of tubular materials[J]. Materials Today Communications,2017,13:210-220.
[20] CHEN Hui,CAI Lixun. Theoretical conversions of different hardness and tensile strength for ductile materials based on stress-strain curves[J]. Metallurgical and Materials Transactions A,2018,49(4):1090-1101.
