The brake groan vehicle road test is carried out under the starting condition of conventional flat road and downhill and transient dynamic characteristics of brake groan are analyzed. The key factors tests of brake groan are designed to study influences of powertrain, brake assembly and suspension assembly on brake groan. The research shows that the vehicle brake groan includes two typical modes of motion, one is the shock vibration with short duration and wide frequency band, and has no definite limit cycle. The other is the periodic harmonic wave vibration with long duration and multiple frequency characteristics, which belongs to a typical stick-slip vibration and has a clear limit cycle. Braking pressure is the key trigger conditions for brake groan. When the braking pressure drops to a specific range with a large slope, the first groan motion mode tends to be triggerred. On the other hand, it is easy to trigger the periodic harmonic vibrations. Vehicle powertrain drive force and engine speed fluctuation are the key factors affecting brake groan. Reasonable design of engine enrichment control strategy from low temperature to normal temperature and starting powertrain control strategy can effectively suppress brake groan. Brake dynamic and static friction coefficient difference is an important factor of brake groan. The connection stiffness between brake backplate and anchor and the mass of brake caliper are also the key factors. Through the design of brake assembly structure parameters to change the vibration mode of the brake when groan occurs, to improve the bow effect of suspension in brake, which provide new ideas for the control of brake groan.
ZHANG Lijun
,
ZHANG Xing
,
MENG Dejian
. Experimental Study on Transient Characteristics and Key Factors of Vehicle Brake Groan[J]. Journal of Mechanical Engineering, 2018
, 54(24)
: 118
-128
.
DOI: 10.3901/JME.2018.24.118
[1] 张立军,刁坤,孟德建,等. 摩擦引起的振动和噪声的研究现状与展望[J]. 同济大学学报, 2013, 41(5):765-772. ZHANG Lijun, DIAO Kun, MENG Dejian, et al. Friction-induced vibration and noise research:the status quo and its prospect[J]. Journal of Tongji University, 2013, 41(5):765-772.
[2] CANTONI C, CESARINI R, MASTINU G, et al. Brake comfort-A review[J]. Vehicle System Dynamics, 2009, 47(8):901-947.
[3] ABDELHAMID M K, BLASCHKE P, WANG W A, et al. An overview of brake noise and vibration problems[C]//Proceedings of SPIE, the International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, 2001, 4359:57-63.
[4] BRECHT J, SCHIFFNER K. Influence of friction law on brake creep-groan[C]//19th Annual Brake Colloquium and Exhibition. New Orleans,USA SAE,2001:2001-01-3138.
[5] 孟宪皆,王欢,吴光强. 汽车制动颤振的研究综述[J]. 公路交通科技, 2009, 26(2):124-128. MENG Xianjie, WANG Huan, WU Guanqiang. Review of research on brake groan[J]. Journal of Highway and Transportation Research and Development, 2009, 26(2):124-128.
[6] 张立军,郑一兵,孟德建,等. 汽车制动器摩擦颤振综述[J]. 同济大学学报, 2016, 44(3):420-426. ZHANG Lijun, ZHEN Yibin, MENG Dejian, et al. Literature survey of friction induced automotive brake groan[J]. Journal of Tongji University, 2016, 44(3):420-426.
[7] J.D. Power亚太公司. 中国新车质量研究[EB/OL].[2013-10-31].http://www.jdpowerchina.com.cn. JD. Power, Asia Pacific Company. China new car quality research[EB/OL].[2013-10-31].http://www.jdpowerchina.com.cn.
[8] ELMAIAN A, GAUTIER F, PEZERAT C, et al. How can automotive friction-induced noises be related to physical mechanisms?[J]. Applied Acoustics, 2014, 76(1):391-401.
[9] RABINOWICZ E. A study of the stick-slip process[J]. Friction and Wear, 1959:149-164.
[10] INOUE M. The stick-slip motion of disc brake pads[J]. Transactions of the Japan Society of Mechanical Engineers C, 1990, 56(521):166-171.
[11] JANG H, LEE J S, FASH J W. Compositional effects of the brake friction material on creep groan phenomena[J]. Wear, 2001(251):1477-1483.
[12] BETTELLA M, HARRISON M F, SHARP R S. Investigation of automotive creep groan noise with a distributed-source excitation technique[J]. Journal of Sound and Vibration, 2002, 255(3):531-547.
[13] CROWTHER A R, YOON J, SINGH R. An explanation for brake groan based on coupled brake-driveline system analysis[C]//SAE 2007 Noise and Vibration Conference and Exhibition. St. Charles, USA SAE, 2007:2007-01-2260.
[14] ABDELHAMID M K. Creep groan of disc brakes[C]//SAE Noise and Vibration Conference and Exposition. Detroit, USA SAE, 1995:951282.
[15] BEHRENDT J, WEISS C, HOFFMANN N P. A numerical study on stick-slip motion of a brake pad in steady sliding[J]. Journal of Sound and Vibration, 2011(330):636-651.
[16] NEIS P D, BAETS P, OST W, et al. Investigation of the dynamic response in a dry friction process using a rotating stick-slip tester[J]. Wear, 2011, 271(9):2640-2650.
[17] JOO K H, JEON H C, SUNG W, et al. Transfer path analysis of brake creep noise[C]//SAE 2013 Brake Colloquium & Exhibition-31st Annual. Jacksonville, USA. SAE, 2013:2013-01-2036.
[18] KIM B, KIM J, KIM K Y, et al. A study on the vehicle body effect on brake noise[R]. SAE, 2016011917, 2016.
[19] WOO J H, KIM J, KIM K Y, et al. A study on the transfer path analysis of brake creep groan noise[R]. SAE, 2014012510, 2014.
[20] CHU Z, ZHENG F, LIANG L, et al. Parameter determination of a minimal model for brake squeal[J]. Applied Sciences, 2018, 8(37):1-15.
[21] 张立军,张频捷,孟德建. 汽车盘式制动器蠕动颤振试验与理论分析[J]. 汽车工程, 2016, 38(9):1132-1139. ZHANG Lijun, ZHANG Pinjie, MENG Dejian. Experimental and theoretical analysis of creep groan of disc brakes[J]. Automotive Engineering, 2016, 38(9):1132-1139.
[22] 倪计民. 汽车内燃机原理[M]. 上海:同济大学出版社, 1997. NI Jimin. Automotive engine theory[M]. Shanghai:Tongji University Press, 1997.
