The warpage quality defect of vacuum casting (VC) parts is usually caused by unstable filling velocity, so the adjustable pressure VC process is proposed. The filling mechanism is analyzed, it is demonstrated that the differential pressure is the key process parameter which affect filling velocity. The filling velocity control strategy is developed by analyzing the relationship between valve opening and filling velocity. The strategy implementation process is introduced. The voxel model of VC part is constructed based on STL model and the features of cavity such as volume and cross sectional area are obtained. In order to gain the theoretical control curve of valve opening, the numerical simulation of mold filling process is carried out adopting control volume method. The fuzzy logic controller (FLC) of valve opening is constructed which using two-dimensional table to realize fuzzy inference, thus the respond speed is quick and the overshoot is low. Finally, combined with concrete examples, the experiments are carried out using test experiment platform. The experiments results fully reflected the advantages of adjustable pressure VC process and proved the feasibility of control strategy and improved the quality of VC parts. In a word, the method is new and useful process for VC technology.
ZHANG Haiguang
,
SONG Chenxia
,
HU Qingxi
. Study on the Intelligent Control Method of Filling Velocity Oriented to Adjustable Pressure Vacuum Casting[J]. Journal of Mechanical Engineering, 2015
, 51(21)
: 165
-173
.
DOI: 10.3901/JME.2015.21.165
[1] 李涤尘，贺健康，田小永，等. 增材制造：实现宏微结构一体化制造[J]. 机械工程学报，2013，49(6)：133-139. LI Dichen，HE Jiankang，TIAN Xiaoyong，et al. Additive manufacturing：Integrated fabrication of macro/ microstructures [J]. Journal of Mechanical Engineering，2013，49(6)：133-139.
[2] 杨叔子，吴波. 先进制造技术及其发展趋势[J]. 机械工程学报，2003，39(10)：77-82. YANG Shuzi，WU Bo. Trends in the development of advanced manufacturing technology [J]. Chinese Journal of Mechanical Engineering，2003，39(10)：77-82.
[3] 刘洪军，李亚敏，曹驰. 快速模具制造技术分析与发展趋势[J]. 模具工业，2010，36(3)：63-66. LIU Hongjun，LI Yamin，CAO Chi. Development trends and demand analysis of rapid tooling technology[J]. Die&Mould Industry，2010，36(3)： 63-66.
[4] 周先辉，田光辉. 硅橡胶模具制作及浇注工艺的探讨[J]. 机械设计与制造，2007(7)：152-153. ZHOU Xianhui，TIAN Guanghui. Study on manufacturing of silicone rubber mould and the pouring technology [J]. Machinery Design & Manufacture，2007(7)：152-153.
[5] 欧志华. 硅胶快速模具真空注型过程CAE分析[D]. 天津：天津大学，2008. OU Zhihua. CAE analysis of the processing of vacuum casting for rapid tooling [D]. Tianjin：Tianjin University，2008.
[6] WAHAB M S，KASSIM N， YUSSOF Y，et al. Manufacturing of removable complete dentures using vacuum casting technique [J]. Applied Mechanics and Materials，2012，120：32-35.
[7] AREMO B，ADEOYE MO. A low-cost vacuum casting equipment for aluminum alloys [J]. Russian Journal of Non-Ferrous Metals，2010，51(2)：124-130.
[8] 王猛，曾建民，黄卫东. 大型复杂薄壁铸件高品质高精度调压铸造技术[J]. 铸造技术，2004，25(5)：353-358. WANG Meng，ZENG Jianmin，HUANG Weidong. Adjusted pressure casting technique for precision casting of large-scale complicated & thin-wall components[J]. Foundry Technology，2004，25(5)：353-358.
[9] 李新雷，郝启堂，李强，等. 低压差压调压一体化反重力铸造装备技术研究[J]. 铸造，2007，56(7)：727-730. LI Xinlei，HAO Qitang，LI Qiang，et al. Study on technology of multifunction counter gravity casting equipment [J]. Foundry，2007，56(7)：727-730.
[10] JIA Lidong， YAO Chunde，HOU Yabang，et al. Experiment of low-pressure injection using methanol[J]. Journal of Mechanical Engineering，2012，48(20)：153-158.
[11] 刘波峰. 过程控制与自动化仪表[M]. 北京：机械工业出版社，2012. LIU Bofeng. Process control and automation instrumentation[M]. Beijing：China Machine Press，2012.
[12] LOGVINOV O A. Stability of the lateral surface of viscous fingers formed when a fluid is displaced from a Hele-Shaw cell [J]. Moscow University Mechanics Bulletin，2011， 66(2)：25-31.
[13] ZHANG Yuliang，LI Yi，CUI Baoling，et al. Numerical simulation and analysis of solid-liquid two-phase flow in centrifugal pump [J]. Chinese Journal of Mechanical Engineering，2013，26(1)：57-64.
[14] 王永富，张义民，柴天佑. 一类不确定机械系统的双调节自适应模糊建模与鲁棒控制[J]. 机械工程学报，2013，49(9)：65-72. WANG Yongfu，ZHANG Yimin，CHAI Tianyou. Adaptive fuzzy modeling and robust control with double adjustment for a class of uncertain mechanical system[J]. Journal of Mechanical Engineering，2013，49(9)：65-72.
[15] 刘文定，王东林. MATLAB/Simulink与过程控制系统[M]. 北京：机械工业出版社，2013. LIU Wending，WANG Donglin. MATLAB /Simulink and process control system [M]. Beijing：China Machine Press，2013.
