Focusing on the skiving of general internal and external profiles, a universal cutting edge calculation method, which involving the enveloping for discrete profiles, is proposed based on the working principle and the generating motion of skiving, and it suits for universal rake flank type. Meanwhile, the calculation method for contact points and corresponding spatial contact motion model are developed. Firstly, the skiving principle is analyzed, and the kinematic model is built in the terms of cutter, workpiece, and configuration parameters. Then, the forward and inverse questions of skiving are analyzed based on the conjugate theory, and the cutting edge curve identification that according to enveloping the intersection curves between rake flank and discrete workpiece surfaces is developed. Moreover, the detail schematic and calculation methods are described, and the judgment for the feasibility of the cutting edge is also given. Additionally, the ascertaining of cutting contact points by cutting edge and the approach on corresponded spatial cutting contact motions simulation are depicted. At last, examples for both external and internal skiving are given to verify the effectiveness of cutting edge identification and skiving motion simulation method.
JIA Kang
,
ZHENG Shuai
,
GUO Junkang
,
HONG Jun
. A Method of Cutter Profile Identification and Machining Motion Simulation for Skiving[J]. Journal of Mechanical Engineering, 2019
, 55(1)
: 216
-224
.
DOI: 10.3901/JME.2019.01.216
[1] VON P. Verfahren zum Schneiden von Zahnrädern mittels eines zahnradartigen, an den Stirnflächen der Zähne mit Schneidkanten versehenen Schneidwerkzeugs:W.01.03.1910[P].1910-01-03. VON P. Method for cutting gears by means of a gear-like cutting tool provided with cutting edges at the end faces of the teeth:W.01.03.1910[P].1910-01-03.
[2] 金精. 车齿法原理与试验结果[J]. 西安交通大学学报, 1962(2):71-99. JIN Jing. Principle and test results of car tooth method[J]. Journal of Xi'an Jiaotong University,1962(2):71-99.
[3] WU J L,LIU C C,TSAY C B,et al. Mathematical model and surface deviation of helipoid gears cut by shaper cutters[J]. Journal of Mechanical Design,2003,125(2):351-355.
[4] KOJIMA M,NISHIJIMA K. Gear skiving of involute internal spur gear:(Part 1. On the tooth profile)[J]. Bulletin of JSME,1974,17(106):511-518.
[5] SPATH D,HUEHSAM A. Skiving for High-performance Machining of Periodic Structures[J]. CIRP Annals,2002,51(1):9l-94.
[6] STADFFELD H J. Power skiving of cylindrical gears on different machine platforms[J]. Gear Technology,2014,31(1):52-62.
[7] 李佳,陈新春,张鸿源. 圆柱齿轮剐齿技术[J]. 机械工程学报,2011,47(19):193-198. LI Jia,CHEN Xinchun,ZHANG Hongyuan. Cylinder gear claw technology[J]. Journal of Mechanical Engineering,2011,47(19):193-198.
[8] 陈新春,李佳,贺友平. 直齿剐齿刀结构设计与计算[J]. 天津大学学报,2012,45(5):411-416. CHEN Xinchun,LI Jia,HE Youping. Structural design and calculation of straight tooth cutter[J]. Journal of Tianjin University,2012,45(5):411-416.
[9] 李佳,娄本超,陈新春. 基于自由曲面的剐齿刀结构设计[J]. 机械工程学报,2014,50(17):157-164. LI Jia,ZHAI Benchao,CHEN Xinchun. Structural design of caries based on freeform surfaces[J]. Journal of Mechanical Engineering,2014,50(17):157-164.
[10] 毛世民. 车齿齿形分析[J]. 机械传动,2014,38(10):50-53. MAO Shimin. Analysis of tooth profiles[J]. Mechanical Transmission,2014,38(10):50-53.
[11] 李海涛,魏文军,董学朱,等. 曲线刀刃双自由度展成曲面的理论和应用[J]. 机械工程学报,2010,46(9):52-58. LI Haitao,WEI Wenjun,DONG Xuezhu,et al. Theory and application of curved blade double degree of freedom to form curved surface[J]. Journal of Mechanical Engineering,2010,46(9):52-58.
[12] 郭二廓,洪荣晶,黄筱调,等. 数控强力刮齿加工锥齿刀刃形计算[J]. 南京工业大学学报,2015,37(4):57-62. GUO Erkuo,HONG Rongjing,HUANG Xiaodiao,et al. Calculation of the shape of the bevel cutter for CNC strong scraping machining[J]. Journal of Nanjing University of Technology,2015,37(4):57-62.
[13] GUO E,HONG R,HUANG X,et al. Research on the design of skiving tool for machining involute gears[J]. Journal of Mechanical Science & Technology,2014,28(12):5107-5115.
[14] TSAI C Y. Mathematical model for design and analysis of power skiving tool for involute gear cutting[J]. Mechanism & Machine Theory,2016,101:195-208.
