[1] ZHONG Yupan,ZHOU Cheng,CHEN Songying,et al. Effects of temperature and pressure on stress corrosion cracking behavior of 310S stainless steel in chloride solution[J]. Chinese Journal Mechanical Engineering,2017,30(1):200-206.
[2] 崔大伟,曲选辉,李科,等. 高氮低镍奥氏体不锈钢的研究进展[J]. 材料导报,2005,19(12):64-67. CUI Dawei,QU Xuanhui,LI Ke,et al. Research progress in high-nitrogen low-nickel austenitic stainless steels[J]. Materials Review,2005,19(12):64-67.
[3] LANG Yuping,QU Huapeng,CHEN Haitao,et al. Research progress and development tendency of nitrogen-alloyed austenitic stainless steels[J]. Journal of Iron and Steel Research,International,2015:22(2):91-98.
[4] 陶杰,姚正军,薛烽,等. 材料科学基础[M]. 北京:化学工业出版社,2006. TAO Jie,YAO Zhengjun,XUE Feng,et al. Materials science and engineering[M]. Beijing:Chemical Industry Press,2006.
[5] SALEHI A R,TAHERI A K. Flow behavior and microstructural evolution of 53Fe-26Ni-15Cr superalloy during hot compression test[J]. Ironmaking and Steelmaking,2007,34(2):151-156.
[6] 黄烁,王磊,张北江,等. GH4706合金的热变形行为与显微组织演化[J]. 材料工程,2015(2):41-46. HUANG Shuo,WANG Lei,ZHANG Beijiang,et al. Hot deformation behavior and microstructure evolution of GH4706 alloy[J]. Journal of Materials Engineering,2015(2):41-46.
[7] DEHGHANMANSHADI A,BARNETT M R,HODGSON P D. Microstructural evolution during hot deformation of duplex stainless steel[J]. Materials Science and Technology,2007,23(12):1478-1484.
[8] 姚媛荣,刘建生,段兴旺,等. 奥氏体不锈钢06Cr19Ni9NbN的动态再结晶行为[J]. 材料热处理学报,2015,36(9):89-93. YAO Yuanrong,LIU Jiansheng,DUAN Xingwang,et al. Dynamic recrystallization behavior of single-phase austenitic stainless steel 06Cr19Ni9NbN[J]. Transactions of Materials and Heat Treatment,2015,36(9):89-93.
[9] PRASAD Y V R K,GEGEL H L,DORAIVELU S M. Modeling of dynamic material behavior in hot deformation:forging of Ti-6242[J]. Metallurgical and Materials Transactions A,1984,15(10):1883-1892.
[10] PRASAD Y V R K,RAO K P. Processing maps for hot deformation of rolled AZ31 magnesium alloy plate:Anisotropy of hot workability[J]. Materials Science and Engineering A,2008,487(1):316-327.
[11] SRINIVASAN N,PRASAD Y V R K. Microstructural control in hot working of IN-718 superalloy using processing map[J]. Metallurgical and Materials Transactions A,1994,25(10):2275-2284.
[12] 郭青苗,李德富,郭胜利,等. GH625合金热变形过程的动态再结晶行为研究[J]. 机械工程学报,2011,47(6):51-56. GUO Qingmiao,LI Defu,GUO Shengli,et al. Research on dynamic recrystallization behavior of GH625 superalloy during hot deformation[J]. Journal of Mechanical Engineering,2011,47(6):51-56.
[13] 卢志江,杨春光,王帅,等. 317L-Cu奥氏体抗菌不锈钢的热变形方程及其热加工图[J]. 钢铁,2014,49(5):52-57. LU Zhijiang,YANG Chunguang,WANG Shuai,et al. Hot deformation equation and processing map of Cu-bearing 317L austenitic antibacterial stainless steel[J]. Iron and Steel,2014,49(5):52-57.
[14] 牛济秦. 材料和热加工领域的物理模拟技术[M]. 北京:国防工业出版社,2007. NIU Jiqin. Physical simulation in materials and hot-working[M]. Beijing:National Defense Industry Press,2007.
[15] 李波,潘清林,张志野,等. 含钪Al-Zn-Mg合金的热变形行为和显微组织[J]. 材料工程,2013(11):6-11. LI Bo,PAN Qinglin,ZHANG Zhiye,et al. Hot deformation behavior and microstructure of Al-Zn-Mg alloy containing Sc during hot compression at elevated temperature[J]. Journal of Materials Engineering,2013(11):6-11.
[16] 曹建国,王天聪,李洪波,等. 基于Arrhenius改进模型的无取向电工钢高温变形本构关系[J]. 机械工程学报,2016,52(4):93-95. CAO Jianguo,WANG Tiancong,LI Hongbo,et al. High-temperature constitutive relationship of non-oriented electrical steel based on modified Arrhenius model[J]. Journal of Mechanical Engineering,2016,52(4):93-95.
[17] 秦芳诚,李永堂. 铸辗复合成形法兰坯高温变形行为及热加工图[J]. 机械工程学报,2016,52(4):45-53. QIN Fangcheng,LI Yongtang. Deformation behavior at elevated temperature and processing maps of flange blanks on casting-rolling compound forming technology[J]. Journal of Mechanical Engineering,2016,52(4):45-53.
[18] SRINIVASAN N,PRASAD Y V R K. Hot working characteristics of nimonic 75,80A and 90 superalloys:A comparison using processing maps[J]. Journal of Materials Processing Technology,1995,51:171-192.
[19] GRONOSTAJSKI Z. The deformation processing map for control of microstructure in CuAl9.2Fe3 aluminium bronze[J]. Journal of Materials Processing Technology,2002,125-126(9):119-124.
[20] PARK N K,YEOM J T,NA Y S. Characterization of deformation stability in hot forging of conventional Ti-6Al-4V using processing maps[J]. Journal of Materials Processing Technology,2002(130-131):540-545.
[21] 肖罡,李落星,刘志文,等. 6013铝合金的热变形行为及热加工图[J]. 材料热处理学报,2014,35(10):23-28. XIAO Gang,LI Luoxing,LIU Zhiwen,et al. Hot deformation behavior and processing map of 6013 aluminum alloy[J]. Transactions of Materials and Heat Treatment,2014,35(10):23-28.
[22] 于洋,熊柏青,惠松骁,等. 铸态Ti-6Al-4V-0.1B合金的热变形行为及加工图[J]. 材料热处理学报,2012,33(6):142-146. YU Yang,XIONG Baiqing,HUI Songxiao,et al. Hot deformation behavior and processing map of as-cast Ti-6Al-4V-0.1B alloy[J]. Transactions of Materials and Heat Treatment,2012,33(6):142-146.
